Product Name:Analogue Input
Brand Name: ICS TRIPLEX
Model Number:T8830
Country of Origin:USA
Warranty: 12 Months
Whatsapp：+86 18159889985
Email：[email protected]
Brand Name: |
ICS TRIPLEX |
Model Number: |
T8830 |
Country of Origin: |
USA |
Packaging Details: |
Original new Factory Sealed |
Delivery Time: |
Delivery time in stock |
Payment Terms: |
T/T |
|
Sales Manager: |
Stella |
|
Send an email: |
|
|
Contact in Whatsapp: |
The T8830 is a 40‑channel analogue input Field Termination Assembly (FTA) from ICS Triplex‘s Trusted series, engineered to interface field devices generating analogue signals with the Trusted TMR Analogue Input Module T8431. The T8830 provides fused per‑channel protection (50 mA), dual redundant 24 Vdc power feeds with diode commoning and onboard LED indication. The T8830 supports SmartSlot connectivity for hot replacement of input modules without system interruption. With SIL 3 certification, DIN rail mounting, and support for 4–20 mA, 0–5 V, and ±5 V input signals, the T8830 delivers high‑integrity signal termination for safety‑critical applications in oil & gas, power generation, and chemical processing.
Oil & Gas – Interfaces 4–20 mA pressure, flow, and temperature transmitters with the Trusted safety system for critical process monitoring
Power Generation – Provides analogue signal termination for turbine, boiler, and generator monitoring in power plants
Chemical & Petrochemical Processing – Connects field sensors to the T8431 analogue input module for safety‑critical control loops
Emergency Shutdown Systems (ESD) – Delivers high‑integrity analogue signal acquisition for safety instrumented functions
Fire & Gas (F&G) Systems – Interfaces gas detectors and flame sensors with the Trusted TMR safety controller
Industrial Automation – Supports RTD, pressure, and flow 4–20 mA sensors via 2‑wire loop‑powered connections
40 High‑Density Input Channels – Provides termination for up to 40 analogue input field devices per assembly
Per‑Channel Fused Protection – Each channel incorporates a 50 mA fast‑acting fuse for independent overcurrent fault isolation
Dual Redundant Power Feeds – Two independent 24 Vdc supplies are diode‑commonized on the FTA, with green LED indication of power integrity
SmartSlot Connectivity – Enables ‘one to many’ hot replacement of input modules without system shutdown
Industry Standard 2‑Wire Connections – Supports loop‑powered field devices with simple 2‑wire termination
Standard DIN Rail Mounting – Compatible with TS32 or TS35 DIN rails in horizontal or vertical orientations
Precision 250 Ω Resistor – Built‑in per channel for converting 4–20 mA current signals to readable voltage levels for the T8431 module
96‑Way Socket Interface – SK1 connector for module cable; SK2 for SmartSlot connection
SIL 3 Certified – Certified for safety‑critical applications up to SIL 3 per IEC 61508
SIL 3 Certified Safety Termination – Unlike generic terminal blocks, the T8830 is certified per IEC 61508 for use in safety instrumented systems up to SIL 3, ensuring compliance with the most stringent regulatory requirements for critical process protection.
Per‑Channel Fused Protection – Each of the 40 channels is individually protected by a 50 mA fast‑acting fuse. This prevents a single field loop short circuit or overcurrent event from cascading into a system‑wide failure, dramatically improving fault containment and reducing troubleshooting time.
Hot‑Swap SmartSlot Architecture – The SmartSlot connection enables ‘one to many’ hot replacement of input modules. Modules can be replaced without powering down the system or disconnecting field wiring, minimising production interruptions during maintenance.
Dual Redundant Field Power Inputs – Two independent 24 Vdc power feeds are diode‑commonized on the FTA. If one power source fails, the other automatically takes over, maintaining continuous field loop operation without interruption.
Integrated Precision Signal Conditioning – A built‑in 250 Ω precision resistor on every channel converts 4–20 mA current signals into readable voltage levels for the T8431 module, eliminating the need for external signal conditioning components.
High Channel Density – 40 input channels per FTA in a compact 335 mm × 111 mm footprint delivers maximum I/O density, reducing cabinet space requirements.
Proven Trusted Platform – Backed by Rockwell Automation‘s Trusted TMR architecture, a globally recognised solution for safety‑critical applications in the world‘s most demanding industries.
Q1: What is the primary function of the T8830?
A1: The T8830 is a 40‑channel analogue input Field Termination Assembly (FTA) that interfaces field devices generating analogue signals (such as 4–20 mA transmitters) with the Trusted TMR Analogue Input Module T8431.
Q2: How many input channels does the T8830 provide?
A2: The T8830 provides 40 analogue input channels per assembly, each with individual 50 mA fuse protection.
Q3: What signal types does the T8830 support?
A3: The T8830 supports 4–20 mA (default), 0–5 V, and ±5 V input signals. Each channel includes a built‑in 250 Ω precision resistor for 4–20 mA to voltage conversion.
Q4: Does the T8830 support hot‑swapping of input modules?
A4: Yes. The T8830 features a SmartSlot connection that enables ‘one to many’ hot replacement of input modules without system shutdown or disconnecting field wiring.
Q5: Is the T8830 certified for use in safety‑critical applications?
A5: Yes. The T8830 is certified to SIL 3 per IEC 61508, making it suitable for use in safety instrumented systems (SIS) for emergency shutdown, fire & gas, and other critical protection applications.
Inquiry Now : [email protected]
EN
