Product Name: WF 726 Special-Machine Control Module
Brand Name: Siemens
Model Number: 6FM1726-3CA00
Place of Origin: Germany
Warranty: 12 Months
Whatsapp: +86 18020776782
Email: [email protected]
Siemens 6FM1726-3CA00 is identified in official Siemens documentation as a WF 726 module for special-machine equipment. The product belongs to a legacy hardware generation documented from the late 1980s, so this page intentionally limits claims to verifiable identity and service guidance.
Before sourcing or installing the board, compare the complete order number, hardware and firmware labels, rack or machine assignment, connector wiring, memory devices and the original machine documentation. Do not infer interchangeability from the WF 726 family name alone.
WF 726 is a legacy machine-control module whose practical function is determined by the installed machine design, board revision and software or parameter data. Public technical data for the exact order number is limited.
A responsible replacement therefore starts with the nameplate and board labels, followed by a verified backup and comparison of the installed connectors, memory components and machine drawings. Unknown values are not filled with family-level assumptions.
Q1. How should I verify 6FM1726-3CA00 before replacing the installed unit?
Answer: Compare the full Siemens order number, board and firmware labels, rack position, connector layout and machine documentation before accepting a replacement.
Q2. Which installation checks are important for 6FM1726-3CA00?
Answer: Isolate the machine, use ESD protection, photograph every connector and secure any removable memory device before moving the board.
Q3. How can I diagnose a startup or communication problem on 6FM1726-3CA00?
Answer: Inspect power rails, edge connectors, socketed components, corrosion, prior repairs and rack faults before concluding that the board itself has failed.
Q4. How should I confirm project or system integration for 6FM1726-3CA00?
Answer: Use the original machine drawings, program media and engineering tools to confirm the module assignment; do not rely only on the WF 726 family name.
Q5. What should I back up or record before removing 6FM1726-3CA00?
Answer: Back up all accessible program and parameter data, record switch or jumper positions, and capture high-resolution photos of both board sides.
Q6. Which details should I provide when requesting a quotation for 6FM1726-3CA00?
Answer: Provide the complete label, board-revision photos, rack and machine type, connector details, fault history, backup status and delivery requirement.
| DA9RP 093914 BMXDDI6402K | LTMR100MFM | 60-734-03 DVI 201 |
| TXM1.8U | MTN648493 | O2 18100050-3 |
| TRIO-PS/3AC/24DC/20 | CUST-GRX-30C | 68-2881-04 revB1 |
| SK-070FE | CHS-BH1 | DI6S |
| RF-EV1012PI-K4 433-80PLUS | HMN3000B-4145 | da5gp |
| 12P1980X052 KJ3001X1-CA1 | EC125 9110-8991 | AX-4SW |
| PWM-PK-3 | RTU-EN01 | MC204A |
| TT-110-BT | U20NRUD300 000 / RS485 | DSE9150 |
| SEM203P / PT100 363-0238 | A00000268 | MS-RA70N |
| MTN646991 REG-K 0-10V | IM1-12EX-T | Merten 670802 |
EN
