Pagina prima>Producta>EMERSON>EMERSON & EPRO Sensor
| VENDITE | Epistula electronica | Telephus WhatsApp |
| Iimus Pei | [email protected] | +86 18020776782 |
| Configuration & performance data Data Sensoris + Converteris | |
|---|---|
| Numerus Exemplaris | PR6423/010-140 CON021 |
| Modelus sensoris | PR6423/010-140 |
| Signal Converter | CON021 |
| Principium mensurationis | Non-contactus Currentium Vertentium |
| Sensor Tip Diameter | 8 mm |
| Intervalum Mensurae Linearis | 2 mm (80 mils) |
| Interstitium Aēreum Initiale | 0,5 mm (20 mils) |
| Factor Scalae Incrementalis | 8 V/mm (203.2 mV/mil) |
| ISF Accuratio | ±5% ad 0 usque ad 45 °C |
| Deviatio Linearitatis | ±0.025 mm at 0 to 45 °C |
| Minimum Diametri Axis | 25 mm |
| Materialis Referentiae Obiectum | 42CrMo4 / AISI 4140 steel |
| Temperatura Sensoris | −35 usque ad +180 °C |
| Protectio sensorum | IP66 secundum IEC 60529 |
| Ingressus Sensoris Converteris | Presa LEMO autobloccante |
| Intervalum factory outputus | -2 usque ad -18 V |
| Intervalum outputus seligibile | -4 ad -20 V |
| Intervallo di Frequenza Nominale | 0 to 20 kHz (-3 dB) |
| Impedimentum output | Circa 100 Ω |
| Dimensiones | 20 × 20 × 4 cm |
| Pondus | 0,66 kg |
| Minimum quantitas ordinis | 1 piece |
| Pretium | Contactus pro Jim |
| Singula Packaging | Novus Originalis, Sigillatus a Fabrica |
| Tempus Traditionis | 3–7 dies |
| Condiciones solutionis | T/T |
| Shipping modum | DHL / FedEx / UPS / TNT |
| Capacitas Supplicandi | Novus prorsus, in stock |
Emerson Epro PR6423/010-140 CON021 combinat sensor electromagneticus PR6423 (8 mm) cum convertere signali CON021 ad mensuram non-contactum motus axis. Catena mensurae praebet intervallum lineare 2 mm et factor scalae incrementalis 8 V/mm cum targeto ferreo specificato. Probator temperaturas sensoris elevatas et protectionem IP66 sustinet. Suffixum integrum "/010-140" identificat configurationem mechanicam et cabelleam suppeditatam. In opere substitutionis suffixum integrum et converterem coniunctum servare oportet, non solum nomen familiae PR6423.
The PR6423/010-140 CON021 catena apta est ad supervisionem positionis axis radialis aut axialis in turbinibus, compressoribus, pompis, ventilatoribus et reductis. Praebet aequipes manutentionis viam directam, sine contactu, a puncto probae ad systema supervisionis. Proba, via extensionis et converter simul inspiciendae sunt ante installationem. Recta dispositio montis et materiae obiecti ad stabiles lectiones retinendas conferunt. Haec exacta configuratio subsidium praebet emendationibus supervisionis status ubi catena Emerson EPRO identica requiritur.
Metitur motum axialis relativum sine contactu mechanico in systematibus protectionis machinarum rotantium.
Restituit canalum displacement iam installatum cum suffixo completo /010-140 et converter congruentibus.
Subsidium praebet observationi continua positionis vel vibrationis in activis rotantis criticis.
CON021 impellit probam eddy-current 8 mm congruentem.
Campus probae interagit cum obiecto axis conductivo trans interstitium aëreum.
Motus destinatus mutationem in responsione electrica circuitus probae inducit.
Converter signum proportionale ad canalem supervisionis connexum praebet.
Nullus contactus glissans inter probam et axem rotantem requiritur.
Catena officialis mensurationis documentatum intervallum operativum 2 mm praebet.
Sectio sensoris ad operationem usque ad +180 °C specificata est.
Suffigium integrum et identitas CON021 controles substitutionis praecisae suadent.
Keep the complete PR6423/010-140 probe suffix and the CON021 converter designation unchanged.
The published reference is 42CrMo4, equivalent to AISI/SAE 4140 steel.
Yes. A correctly mounted chain can measure axial or radial shaft displacement within its configured range.
We inspect the probe, cable, connector, converter label and visible housing condition before packing.
Preparation starts immediately after cleared payment, followed by tracking after collection.
Provide quantity, destination, current probe label, converter label and mounting information.
The company began in Xiamen, Fujian, China, with a four-person team serving selected European and North American automation customers. Early work centered on building product knowledge, dependable sourcing processes, and practical international trade experience.
By 2017, the team had grown to approximately 30 people and established a warehouse for in-stock automation components. The business expanded across Europe, North America, and Southeast Asia while sourcing capabilities widened to include scarce and discontinued industrial automation parts.
In 2026, a broader professional team supports customers worldwide—from inquiry through sourcing, order coordination, delivery, and after-sales communication. The company continues to supply popular, hard-to-find, and discontinued automation components while building long-term international partnerships through responsible service.
| ZN1CL-kLIC-DI | 020-747 | 1794-OF4I |
| DI02 | WML-317-292 | CLIOP821A |
| 5WG1510-1AB03 / 5WG15101AB03 | GLB136-1E | EAOM-3 |
| 10-b13 | 1938680000 | BAU200 |
| 51870-30-50 | WV-V1330LK | RSSWP-2475W-FR |
| KCD2-SCD-EX1 | W7751F2011 | MTL1143 |
| BD35 | MTN6700-0004 | RH10E |
| MS-4AOVC | SB-DN-PS1.2AD | ABB 8300-0-8042 M251021P4 |
| ETC333 | DM-RMC-4K-100-C | USW 333 |
| CS540 | CARBON 1-22 | 6ES7422-1HH00-0AA0 |
| HCS8011SFP | CRM-4 | 96161730-V01 |
| 3EH73034ABJB | MPF3-912RSL | A211F--1M |
| PP-100-W | HNW50049911-001 | IC200MDL750J |
EN
