Omnia producta

Siemens 6ES7157-0AG82-0XA0 SIMATIC AFD8 Active Field Distributor

Siemens 6ES7157-0AG82-0XA0 SIMATIC AFD8 Active Field Distributor

Nomen producti: SIMATIC AFD8 Active Field Distributor

Nomen Marcae: Siemens

Numerus Modeli: 6ES7157-0AG82-0XA0

Locus Originis: Germania

Garantia: 12 Mensis

Whatsapp: +86 18020776782

Inscriptio electronica: [email protected]

Appurtenance:

Conspectus
Instauratio et Integratio
Specificationes
Monitoratio et Imperium
DESCRIPTIO
Commercial Term
INFORMATIO CONTACTUS
Quaestiones Frequentes
Other Products
Producta commendata

Eight-spur active field distributor for robust PROFIBUS PA and FOUNDATION Fieldbus H1 installations

The AFD8 distributes one fieldbus trunk to eight short-circuit-protected spur connections, supports automatic bus termination and operates from the bus without a separate auxiliary supply.

Punctum selectionis: Confirm the exact AFD8 order number, trunk and spur topology, field-device current, cable glands, grounding method, hazardous-area classification and FDC 157 relationship before replacement.

Instauratio et Integratio

Fieldbus continuity and enclosure protection depend on a documented conductor-by-conductor transfer.

Cable map

Label both trunk directions and all eight spur destinations before disconnecting the original AFD8.

Terigo

Restitue railul de pământ și aranjamentul de ecranare exact așa cum este cerut de proiectarea fieldbus instalată.

Hermeticitas cistae

Folosește etanșări și cleme M16 adecvate, respectă limitele de diametru ale cablurilor și închide toate intrările neutilizate.

Specificationes

Designatio generis producti

Distribuitor de câmp activ SIMATIC AFD8

Numerus ordinis

6ES7157-0AG82-0XA0

Fieldbus suportat

PROFIBUS PA y FOUNDATION Fieldbus H1.

Conexiuni trunchi

Două conexiuni cu bornă filetată, cu terminare automată a bus-ului

Connexiones spur

Opt linii secundare protejate împotriva scurtcircuitelor

Permissum Supplicationis Intervallum

16–32 V CC, alimentat prin bus

Currus sine onere

34 mA

Currentus Maximus per Spurium

60 mA

Maximum Total Field-Device Current

480 mA

Gradus praesidium

IP66

Temperatura operativa

−40 ad +70 °C

Dimensiones / Pondus

360 × 120 × 83 mm fără cleme pentru cabluri; aproximativ 3000 g

Monitoratio et Imperium

Ute segmenti currentem et locales diagnostics ad isolandum problemata in wiribus antequam instrumenta substituuntur.

Examinatio oneris

Calcula totalem currentem trunki et spuri et includere currentem AFD8 in positione finis lineae.

Diagnostica per LED

Inspecta indicatio diagnosticorum et isolare unum spuri ad tempus cum circuitus curtus aut defectus bus suspectus est.

Reinicia verificationem

Confirma communicationem ad omne dispositivum in campo et recense suprascripta diagnostics segmenti postquam potentia restituta est.

DESCRIPTIO

6ES7157-0AG82-0XA0 destinatur ad retia processuum in campo ubi plura instrumenta connectuntur ad communem PROFIBUS PA vel FOUNDATION Fieldbus H1 trunkum. LEDs diagnosticorum et protectio contra circuitus curtos spuri favent locali investigationi errorum.

Communio fidabilis pendet ex conservatione omnium conductorum trunki et spuri, scuti et connexiones terrae. Nota destinationes dispositivorum, polaritatem et positiones glandularum cableorum, deinde verifica onus totale spuri antequam potentia bus restituatur.

Commercial Term

Praeoffertio

Current price & availability

Solutio

T/T aut condicionibus conventis

Tempus praecedens

Confirmed by quotation

Navigatio

DHL, FedEx, UPS or freight

Garantia

12 Mensis

INFORMATIO CONTACTUS

Contactus

Iimus Pei

[email protected]

+86 180 2077 6782

Quaestiones Frequentes

Q01

Quomodo verificare possum ut 6ES7157-0AG82-0XA0 idoneus sit pro meo segmento fieldbus?

Confirm the AFD8 eight-spur requirement, PROFIBUS PA or FOUNDATION Fieldbus H1 design, 16 to 32 V DC bus supply, total current budget, cable-gland size, IP66 requirement and hazardous-area classification.

Q02

What should I document before replacing 6ES7157-0AG82-0XA0?

Label both trunk cables and all eight spur destinations, then record conductor polarity, shield and ground connections, cable-gland positions, termination state, device current and active diagnostic indications.

Q03

Why can the fieldbus segment remain offline after 6ES7157-0AG82-0XA0 is installed?

Check trunk polarity, automatic termination at the segment end, loose screw terminals, supply voltage under load, shield and grounding continuity and short-circuited spurs. Reconnect spurs one at a time while monitoring the segment.

Q04

What should I inspect when one spur of 6ES7157-0AG82-0XA0 repeatedly reports a short circuit?

Isolate the spur safely and inspect cable damage, moisture, gland sealing, reversed conductors, and the field-device terminal block. Measure the spur independently before reconnecting it to the distributor.

Q05

How should I preserve the IP66 protection of 6ES7157-0AG82-0XA0 during installation?

Use correctly sized and rated cable glands, maintain clean sealing surfaces, close every unused entry, tighten the enclosure evenly, and inspect cable strain relief before returning the distributor to service.

Q06

Which details should I provide when requesting replacement 6ES7157-0AG82-0XA0?

Provide the full order number, segment protocol, hazardous-area classification, trunk and spur count, cable and gland details, measured supply and load current, diagnostics, and clear photographs of the label and wiring.

Other Products

MSR142RTP 440R-G23215	127610-01	VT5400
60HH-S	GAMAX2	DLAF8000
VROM-101	ADV151-E10	12.1600 605 0056 R0002
IZM-KLP-SO-RONIS	MTN649202	HDA032Z
BMXAMI0410H	REF.04813	DCJ4501-01PLF PSU-350-AC
9733 1-871166-002	1762-IT4	MCW-211-SM-LC15
PPM C12	HDSB00P1 HD6	TS16
SIGYOK-DI32R-L	1AK23152AAAA	ABB 2CDG 110 167 R0011
VM3D 50119638001	3VT1792-2EJ46-0AA0	4000P 54X209582
GE BWT1-1/1T-05-NB-AX/EX-V	FS5850-12-05	VIO-25/60