Omnia producta

Siemens 6GK7443-5DX05-0XE0 SIMATIC NET CP 443-5 Extended PROFIBUS Communications Processor

Siemens 6GK7443-5DX05-0XE0 SIMATIC NET CP 443-5 Extended PROFIBUS Communications Processor

Nomen producti: SIMATIC NET CP 443-5 Extended PROFIBUS Communications Processor

Nomen Marcae: Siemens

Numerus Modeli: 6GK7443-5DX05-0XE0

Locus Originis: Germania

Garantia: 12 Mensis

Whatsapp: +86 18020776782

Inscriptio electronica: [email protected]

Appurtenance:

Conspectus
DESCRIPTIO
Specificationes
INFORMATIO CONTACTUS
Commercial Term
Quaestiones Frequentes
Other Products
Producta commendata

Extend an S7-400 station to a controlled PROFIBUS segment

CP 443-5 Extended connects a SIMATIC S7-400 or S7-400H station to PROFIBUS DP. It also supports S5-compatible, PG/OP and S7 communication services.

Before you order: Check the installed CPU, CP hardware and firmware, STEP 7 project, bus address and DP network before choosing a replacement.

DESCRIPTIO

CP 443-5 Extended es un procesador de comunicaciones, non un controlador autonomus. In un installation S7-400, illo forni un interface PROFIBUS separate pro DP e altere servitios de communication, dumque le CPU e le projecto STEP 7 definite le application.

Durante un intercambio contrullate, archiva le configuration de hardware e le blocos de communication, registra le parametros de bus e le stationes connectite, e compara le firmware actual con le projecto aprobate. Siemens monstra contra le cargamento de parametros de bus modificate al CP per le iste ligamine PROFIBUS que es essente modificate.

Communicatio et Conectivitas

Le scheda de datos official lista un interface electric PROFIBUS, un intervallo de velocitate de transferentia de 9,6 kbit/s usque a 12 Mbit/s e capacitate de master DPV1. Verifica le topologia real del rete e le termination.

Configuratio et Programmatio

Le manual de Siemens lista STEP 7 V5.5 SP1 o STEP 7 Professional V12 pro le conjunto complete de functiones documentate. Compara le firmware installate e le entrata de catalogo del CP ante de cargar.

Recomandări pentru actualizare

A later CP or firmware is not automatically a drop-in spare. Verify S7-400 CPU support, configured communication services and the machine owner's approved project.

Specificationes

Familia producti

SIMATIC NET CP 443-5 Extended

Platform

SIMATIC S7-400 / S7-400H

Campusbus

PROFIBUS DP

PROFIBUS Rate

9,6 kbit/s ad 12 Mbit/s

DP Master Function

DPV1 supported

DP slaves

Up to 125, subject to system configuration

Interfacing Physica

One 9-pin PROFIBUS D-sub connection

Communication Services

S5-compatible, PG/OP and S7 communication

INFORMATIO CONTACTUS

Contactus

Iimus Pei

[email protected]

+86 180 2077 6782

Commercial Term

Praeoffertio

Pretium praesens et disponibilitas

Solutio

T/T aut condicionibus conventis

Tempus praecedens

Confirmatum cum citatione

Navigatio

DHL, FedEx, UPS aut oneribus conventis

Garantia

12 Mensis

Quaestiones Frequentes

How can I check whether 6GK7443-5DX05-0XE0 will work in my S7-400 rack?

Compare the exact order number and hardware release with the CPU, rack and STEP 7 hardware configuration. Confirm the PROFIBUS role and current firmware before ordering.

What should I back up before replacing 6GK7443-5DX05-0XE0?

Salva le projectum STEP 7 approbatum, configurationem CP et blocos communicationis. Nota adressem PROFIBUS, velocitatem baud, listam servorum DP, terminationem et buffer diagnosticum actualem.

Cur servi DP manent offline post installationem 6GK7443-5DX05-0XE0?

Primum inspice potestatem bus, connectores et terminationem; deinde compara adressem magistrum, velocitatem baud, adressem servorum et configurationem downloadatam. Lege diagnostics CP et servorum antequam rursus mutes hardware.

Possumne mutare velocitatem baud PROFIBUS per 6GK7443-5DX05-0XE0 dum idem bus connectitur?

Ne confidas in hac via. Siemens monet ne oneres parametrum bus mutata per PROFIBUS; utere conexione ingenieriae alternativa idonea et fenestra mutationis regulata.

Quid si 6GK7443-5DX05-0XE0 incipit sed communicatio PG/OP deficit?

Confirma ut servitium PG/OP sit configuratum, ut adresa destinata et parametri bus conveniant, et ut projectum STEP 7 et versiones blocorum requirantur iam sint oneratae. Separabis defectum rete ab inaequalitate configurationis CP.

Quid agendum est emptori, cum rogat 6GK7443-5DX05-0XE0?

Praebere photographiam tabulae nominis, integrum numerum ordinis, versiones hardware et firmware, modellem S7-400 CPU, configuratam CP functionem et quaslibet necessitates loci pro rebus servitii identicis.

Other Products

IO113	EN837-1	033010-A
ABB 1KNU3000R1001 23BI61R1LF	ESA047010 SM87HXB SY1178500	AM313830035
PN:05605120	GVAG-2VK1S	SDO-0824
A9MEM3255 iEM3255	BX8000-0000	VFNC3S-2007PL
TZ350 APL28-0B4	162235-PR	MS-VMA1630-1
BR6000-R06	8265674	SK3120115
SL5/1	SWB-23 / S9440BJ-01	SB-DN-EIB
87419544	ABB PNU32	ABB 1SD A0 66317
3051 03031-3023-0022	BK5250	N-ID8
XD26 MILLENIUM3 88974163	SXWDI16XX10001	SWP-99-2128-1-4-001