Omnia producta

Bently Nevada 3300 XL 8 mm 129716-XXX-040-15 MOD:166797-0133 Configuration-Controlled Flexible Proximity Probe Assembly | Original New

Bently Nevada 3300 XL 8 mm 129716-XXX-040-15 MOD:166797-0133 Configuration-Controlled Flexible Proximity Probe Assembly | Original New

BENTLY NEVADA · 3300 XL 8 mm

129716-XXX-040-15 MOD:166797-0133

Conformatio flexibilis adpropiationis probe composita et controlata

Configurationis Factory-controlled MOD 166797-0133	System reference 3300 XL 8 mm Proximitatis Systema
Tempus praecedens In stoce	Garantia unum annum

Inquisitio per epistulam electronicam [email protected]

WhatsApp +86 18159889985

Appurtenance:

Conspectus
Data Technica
Inquisitio
Applicationes
Construction
Installatio
Selectio
Quaestiones Frequentes
Modellos Recommandatos
Producta commendata

Configuration-Controlled Sensor Accessory

Flexible proximity measurement assembly for rotating machinery

The 129716 assembly is a configuration-controlled Bently Nevada sensor accessory associated with the 3300 XL 8 mm proximity transducer system. Public literature confirms the base part number and family performance; the XXX, 040, 15 and MOD 166797-0133 geometry remain governed by the factory drawing.

Officium Systematis

Non-contact shaft vibration and position measurement within a matched proximity transducer chain.

PUBLICLY VERIFIED

The 129716 base part appears in the official country-specific approvals guide.

CONTROLLED BUILD

Exact mechanical configuration must follow MOD 166797-0133 and the product identification.

Data Technica

DATUM OFFICIALE

Model-specific technical data

129716-XXX-040-15 MOD:166797-0133

Modello completo Modello completo	129716-XXX-040-15 MOD:166797-0133
Familia producti Familia producti	Systematis transductoris proximitatis Bently Nevada 3300 XL 8 mm
Typus Producti Typus Producti	Conformatio flexibilis adpropiationis probe composita et controlata
Dimensiones Dimensiones	Dimensiones exactae conformationis controlantur per schemata MOD 166797-0133 et non publicantur in folio dati publico
Pondus Pondus	Pondus exactum compositionis non publicatur; referentia systematis 3300 XL 8 mm est 0.7 kg (1.5 lb) typice
Campus Linearis Campus Linearis	2.0 mm (80 mils), circa 0.25 ad 2.3 mm ab obiecto
Factor Scalae Factor Scalae	7.87 V/mm (200 mV/mil)
Frequency Responsio Frequency Responsio	0 ad 10 kHz
Cavea Probatoria Cavea Probatoria	cablum triaxiale 75 ohm cum insulatio FEP; longitudo exacta configurata controlatur per schemata moduli
Radius Flexionis Minimus Radius Flexionis Minimus	25,4 mm (1,0 in)
Probe Temperature Probe Temperature	-51 ad +177 gradus C (-60 ad +351 gradus F)
Referentia approbationum Referentia approbationum	Numerus partis basis 129716 enumeratur in officiali indice 108M1756; verificare optionem patriae configuratam in tabella nominis

Inquisitio

Contactus

Stella

Inquisitio per epistulam electronicam [email protected]

WhatsApp +86 18159889985

Applicationes

Contextus Applicationis

Functiones et valor in campo

Verified family capabilities and model-specific configuration

Machinae cum iuncturis pellicularum fluidarum Supports non-contact measurement of shaft radial vibration and position when installed as part of a matched 3300 XL 8 mm transducer system.	Turbines and compressors Applicable to critical rotating equipment where repeatable probe geometry, cable integrity and system interchangeability are essential.
Position and reference signals The family supports static position, dynamic vibration, Keyphasor reference and speed measurements when the complete system is correctly selected.	Substitutio ad manutenentiam Use the complete model and MOD drawing to preserve mechanical fit, connector arrangement and cable routing during replacement work.

Construction

ASSEMBLY ARCHITECTURE

Constructio et interfacies

Official materials and connection details

Apicem probulae Apicem probulae	Polyphenylene sulfide tip material for the standard 3300 XL 8 mm family reference.
Probe Case Probe Case	Acciaio inossidabile AISI 303 o 304.
Funis Funis	75 ohm triaxial FEP-insulated probe cable; optional armored construction exists in the family.
Conector Conector	Corrosion-resistant gold-plated ClickLoc connector architecture in the standard family.

Installatio

FLUXUS OPERIS IN LOCO

Ordo installationis et inspectiones

01	Confirm the controlled drawing Match 129716-XXX-040-15 and MOD 166797-0133 to the equipment record before removing the existing assembly.
02	Verify the transducer chain Confirm probe, extension cable and Proximitor Sensor system length and compatibility before installation.
03	Route without cable stress Maintain at least the 25.4 mm cable bend radius and protect the connector and cable from pull, abrasion and contamination.
04	Interstitium et conprobatio Constitue interstitium probae intra regionem linearem officialis 3300 XL 8 mm et conproba suppetitiam, statum OK, tensionem interstitialis staticae et signum dynamicum.

Selectio

REVISIO CODICIS ORDINIS

Puncta controlis configurationis

129716-XXX-040-15 MOD:166797-0133

129716 129716	Numerus partis basis accessoriae sensoris Bently Nevada officialiter enumeratus.
XXX XXX	Token configurationis a fabrica regitus; litteratura publica non attribuit significatum optionis standard.
040 040	Token configurationis a fabrica regitus exacte ut iussus retentus.
15 15	Suffigium a fabrica regitum exacte ut iussus retentum.
MOD:166797-0133 MOD:166797-0133	Identificator schematis modificationis quod aedificationem mechanicam exactam regit.

Quaestiones Frequentes

LISTO DE KONTROLADO POR ACHETANTO KAJ INGENIERO

Ses praktikaj demandoj antaŭ aĉeto

129716-XXX-040-15 MOD:166797-0133

1. How should the quoted identity be verified?

Require 129716-XXX-040-15 MOD:166797-0133 on the quotation, photos and product identification. A base 129716 number alone does not establish the modified geometry.

2. How can new stock be separated from used or rebuilt stock?

Request dated images of the entire probe, tip, cable, connector, labels and packaging. Inspect the tip for contact marks, the cable for bends or abrasion and the connector for tool wear.

3. What makes a supplier credible for a modified probe?

Verify the legal entity, beneficiary account, traceable quotation and a written inspection or return process. A qualified supplier should provide readable evidence of the MOD reference before payment.

4. What must engineering confirm before purchase?

Confirm the MOD drawing, probe family, total system length, connector arrangement, cable routing, mounting geometry and compatibility with the installed extension cable and Proximitor Sensor.

5. What evidence is useful before payment?

Ask for current whole-unit and nameplate photos, close views of the probe tip and connector, packaging evidence and any agreed electrical inspection record tied to this exact model.

6. Can another 129716 suffix be substituted?

Not automatically. The public datasheet does not decode these custom tokens, so any suffix or MOD change requires a controlled drawing comparison and engineering approval.

Modellos Recommandatos

Commendatur

Recommend Model

Random cross-brand industrial automation models

Recommend Model

DDRC420FR	60-865-03	3113A
DI12	KFD2-GS-1.2W	370710B-200
BX8000-0000	554571-0-02	AKB331-M010
IM72-11Ex/L	XB15	JBS-100-EP
CT2700	3100/40-YY	EDS-510A-1GT2SFP-T
Tya604d	S-B1008D-04	TM218LDA24DRN
061088-A	RC-1000A-7	24/24/2-0.5
TA410	T-ASH-G2-500	171CCC98020
6FL43013CA11	DDMC802-PB	LNL-1100
FLKM-D25	STBPDT3100K	ADLY-4
ENCL-MZ800-PAN	MES120	78/7-2000
3010-073-0013-2	2832328	AAM51-S2
TMC240	1756-PA75R/A	102F
IF16INISO	DVR1	MHFP012DKS
MMC-110A-F200-0001	4910273	TM221ME16RG
EPX-41D4CH	eds-505a-mm-sc	060G1328
WTR1-P421S08	TXM1.6R	PM1120H
NIAI04	127584	714701
DMC-4k-HDO	KP12LK	3AA01318700
RM7823	COM-3300	E50H5A