ALL PRODUCTS

Bently Nevada 3300 XL 8 mm 129716-XXX-040-15 MOD:166797-0133 Configuration-Controlled Flexible Proximity Probe Assembly | Original New

Bently Nevada 3300 XL 8 mm 129716-XXX-040-15 MOD:166797-0133 Configuration-Controlled Flexible Proximity Probe Assembly | Original New

BENTLY NEVADA · 3300 XL 8 mm

129716-XXX-040-15 MOD:166797-0133

Configuration-Controlled Flexible Proximity Probe Assembly

Configuration Factory-controlled MOD 166797-0133	System reference 3300 XL 8 mm proximity system
LEAD TIME In stock	WARRANTY 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 3300 xl 8 mm 129716 xxx 040 15 mod 166797 0133 configuration controlled flexible proximity probe assembly original new-1

Overview
Technical Data
Inquiry
Applications
Construction
Installation
Selection
FAQ
Recommend Models
Recommended Products

CONFIGURATION-CONTROLLED SENSOR ACCESSORY

Flexible proximity measurement assembly for rotating machinery

The 129716 assembly is a configuration-controlled Bently Nevada sensor accessory associated with the 3300 XL 8 mm proximity transducer system. Public literature confirms the base part number and family performance; the XXX, 040, 15 and MOD 166797-0133 geometry remain governed by the factory drawing.

SYSTEM ROLE

Non-contact shaft vibration and position measurement within a matched proximity transducer chain.

PUBLICLY VERIFIED

The 129716 base part appears in the official country-specific approvals guide.

CONTROLLED BUILD

Exact mechanical configuration must follow MOD 166797-0133 and the product identification.

Technical Data

OFFICIAL DATA

Model-specific technical data

129716-XXX-040-15 MOD:166797-0133

Complete model Complete model	129716-XXX-040-15 MOD:166797-0133
Product family Product family	Bently Nevada 3300 XL 8 mm proximity transducer system
Product type Product type	Configuration-controlled flexible proximity probe assembly
Dimensions Dimensions	Exact configuration dimensions are controlled by MOD drawing 166797-0133 and are not published in the public datasheet
Weight Weight	Exact assembly weight is not published; 3300 XL 8 mm system reference is 0.7 kg (1.5 lb) typical
Linear range Linear range	2.0 mm (80 mils), approximately 0.25 to 2.3 mm from target
Scale factor Scale factor	7.87 V/mm (200 mV/mil)
Frequency response Frequency response	0 to 10 kHz
Probe cable Probe cable	75 ohm triaxial FEP-insulated cable; exact configured length controlled by the model drawing
Minimum bend radius Minimum bend radius	25.4 mm (1.0 in)
Probe temperature Probe temperature	-51 to +177 degrees C (-60 to +351 degrees F)
Approvals reference Approvals reference	Base P/N 129716 is listed in official guide 108M1756; verify the configured country option on the nameplate

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications

APPLICATION CONTEXT

Functions and field value

Verified family capabilities and model-specific configuration

Fluid-film bearing machinery Supports non-contact measurement of shaft radial vibration and position when installed as part of a matched 3300 XL 8 mm transducer system.	Turbines and compressors Applicable to critical rotating equipment where repeatable probe geometry, cable integrity and system interchangeability are essential.
Position and reference signals The family supports static position, dynamic vibration, Keyphasor reference and speed measurements when the complete system is correctly selected.	Maintenance replacement Use the complete model and MOD drawing to preserve mechanical fit, connector arrangement and cable routing during replacement work.

Construction

ASSEMBLY ARCHITECTURE

Construction and interfaces

Official materials and connection details

Probe tip Probe tip	Polyphenylene sulfide tip material for the standard 3300 XL 8 mm family reference.
Probe case Probe case	AISI 303 or 304 stainless steel.
Cable Cable	75 ohm triaxial FEP-insulated probe cable; optional armored construction exists in the family.
Connector Connector	Corrosion-resistant gold-plated ClickLoc connector architecture in the standard family.

Installation

FIELD WORKFLOW

Installation sequence and checks

01	Confirm the controlled drawing Match 129716-XXX-040-15 and MOD 166797-0133 to the equipment record before removing the existing assembly.
02	Verify the transducer chain Confirm probe, extension cable and Proximitor Sensor system length and compatibility before installation.
03	Route without cable stress Maintain at least the 25.4 mm cable bend radius and protect the connector and cable from pull, abrasion and contamination.
04	Gap and validate Set the probe gap within the official 3300 XL 8 mm linear region and verify supply, OK status, static gap voltage and dynamic signal.

Selection

ORDER-CODE REVIEW

Configuration checkpoints

129716-XXX-040-15 MOD:166797-0133

129716 129716	Officially listed Bently Nevada sensor accessory base part number.
XXX XXX	Factory-controlled configuration token; public literature does not assign a standard option meaning.
040 040	Factory-controlled configuration token retained exactly as ordered.
15 15	Factory-controlled suffix retained exactly as ordered.
MOD:166797-0133 MOD:166797-0133	Modification drawing identifier that governs the exact mechanical build.

FAQ

BUYER AND ENGINEER CHECKLIST

Six practical questions before purchase

129716-XXX-040-15 MOD:166797-0133

1. How should the quoted identity be verified?

Require 129716-XXX-040-15 MOD:166797-0133 on the quotation, photos and product identification. A base 129716 number alone does not establish the modified geometry.

2. How can new stock be separated from used or rebuilt stock?

Request dated images of the entire probe, tip, cable, connector, labels and packaging. Inspect the tip for contact marks, the cable for bends or abrasion and the connector for tool wear.

3. What makes a supplier credible for a modified probe?

Verify the legal entity, beneficiary account, traceable quotation and a written inspection or return process. A qualified supplier should provide readable evidence of the MOD reference before payment.

4. What must engineering confirm before purchase?

Confirm the MOD drawing, probe family, total system length, connector arrangement, cable routing, mounting geometry and compatibility with the installed extension cable and Proximitor Sensor.

5. What evidence is useful before payment?

Ask for current whole-unit and nameplate photos, close views of the probe tip and connector, packaging evidence and any agreed electrical inspection record tied to this exact model.

6. Can another 129716 suffix be substituted?

Not automatically. The public datasheet does not decode these custom tokens, so any suffix or MOD change requires a controlled drawing comparison and engineering approval.

Recommend Models

RECOMMENDED

Recommend Model

Random cross-brand industrial automation models

Recommend Model

DDRC420FR	60-865-03	3113A
DI12	KFD2-GS-1.2W	370710B-200
BX8000-0000	554571-0-02	AKB331-M010
IM72-11Ex/L	XB15	JBS-100-EP
CT2700	3100/40-YY	EDS-510A-1GT2SFP-T
TYA604D	S-B1008D-04	TM218LDA24DRN
061088-A	RC-1000A-7	24/24/2-0.5
TA410	T-ASH-G2-500	171CCC98020
6FL43013CA11	DDMC802-PB	LNL-1100
FLKM-D25	STBPDT3100K	ADLY-4
ENCL-MZ800-PAN	MES120	78/7-2000
3010-073-0013-2	2832328	AAM51-S2
TMC240	1756-PA75R/A	102F
IF16INISO	DVR1	MHFP012DKS
MMC-110A-F200-0001	4910273	TM221ME16RG
EPX-41D4CH	eds-505a-mm-sc	060G1328
WTR1-P421S08	TXM1.6R	PM1120H
NIAI04	127584	714701
DMC-4k-HDO	KP12LK	3AA01318700
RM7823	COM-3300	E50H5A