Omnia producta

Bently Nevada 330500 Velomitor 330500-01-00 Piezo-velocity Sensor | Original New

Bently Nevada 330500 Velomitor 330500-01-00 Piezo-velocity Sensor | Original New

BENTLY NEVADA | 330500 VELOMITOR

330500-01-00

Velomitor Piezo-velocity Sensor cum Adaptatore Montaggio 1/2-20 UNF et Optione Non Approbationis Agenticis

Configuratio: Velomitor sensor piezo-velocity | Adaptator montis filetus 1/2-20 UNF | Approbatio agenticis non requiritur

Tempus ducens: In stoce

Garantia: unum annum

Inquisitio per epistulam electronicam [email protected]

WhatsApp +86 18159889985

Appurtenance:

Conspectus
Data Technica
Inquisitio
Configurationis
Applicationes
Installatio
Compatibilitas
Quaestiones Frequentes
Modellos Recommandatos
Producta commendata

Bently Nevada 330500-01-00

Velomitor Piezo-velocity Sensor with 1/2-20 UNF Mounting Adapter and No Agency Approval Option. The complete ordering identity must remain associated with its documented mechanical, electrical, environmental and approval configuration.

Core selling point: Solid-state 100 mV/in/s velocity sensing with no moving parts and a 5 kHz upper response limit.

Fons officialis: 141632 Rev. V, pages 1, 3, 4, 5, 7 and 11. Atvērt datu lapas PDF

Data Technica

Modello completo	330500-01-00
Nota	Bently Nevada
Familia producti	330500 Velomitor Piezo-velocitatis Sensor
Typus Producti	Sensor Piezo-velocitatis
Dimensiones	25.3 mm (0.995 in) diametrum × 63.2 mm (2.49 in) altitudo
Pondus	142 g (5.0 oz), typice
Adaptator ad Montandum	01: 1/2-20 UNF
Sensitivitas	3,94 mV/mm/s (100 mV/in/s) ±5%
Frequency Responsio	4.5 Hz ad 5 kHz ±3 dB; 6 Hz ad 2.5 kHz ±0.9 dB
Ambitus velocitatis	1270 mm/s (50 in/s) ad summun
Linearitas Amplitudinis	±2% ad 152 mm/s (6 in/s) ad summum
Potentia Requirements	-22 ad -30 VDC; 2.5 ad 6.0 mA currente bias
Tensio Praeoccupans Exitus	-12 ±3 VDC referente ad pinum A
Impedentia Producti Dynamica	Minus quam 2400 ohm
Conector	2-pin MIL-C-5015 hermetice sigillatus, concha ex accipitro inox 316L
Longitudo cavi recommendata	Usque ad 63 m (208 ft) sub condicionibus declaratis: 50 g, 10 kHz et 200 pF/m
Temperatura operativa	-55 ad +121 °C (-67 ad +250 °F)
Material pars	316L Ferrum Inoxydabile
Torque Montandi	32 ad 46 kg·cm (24 ad 40 in·lb) maximum
Optionem Aprobationis Agentiae	00: approbationes non requiruntur

Fonte: 141632 Rev. V, paginae 1, 3, 4, 5, 7 et 11.

Inquisitio

CONTACTA STELLA

Inquisitio per epistulam electronicam [email protected]

WhatsApp +86 18159889985

Configurationis

Radix modello	330500
Sensor type	Sensor piezo-velocitatis Velomitor status solidus
Adaptator ad Montandum	01 = 1/2-20 UNF
Conector	Conector hermetice sigillatus 2-pin MIL-C-5015
Approbatio Ab Agente	00 = Non requiritur

Applicationes

Measure absolute vibration on bearing housings, machine casings, and structural surfaces.

Use where direct velocity output simplifies monitoring of rotating machinery vibration.

The solid-state sensor may be mounted vertically, horizontally, or at another qualified orientation.

Connect to compatible Bently Nevada monitors that provide the documented constant-current supply.

Installatio

Superficies Montandi	Use a clean, flat, rigid surface and the 01 option 1/2-20 UNF adapter.
Torques	Apply 32 to 46 kg·cm (24 to 40 in·lb) maximum mounting torque.
Directio Cavi	Use a compatible two-pin mating cable, protect the connector, and keep routing clear of strain and high-energy interference.
Polaritas	Pin A becomes positive with respect to pin B when the case moves toward the connector.

Compatibilitas

Monitor input	Compatible constant-current velocity input providing -22 to -30 VDC and 2.5 to 6.0 mA.
Montatio	1/2-20 UNF adapter execution; other adapter suffixes change the machine connection.
Cablus et Conectorium	Use a cable for the two-pin MIL-C-5015 connector and observe the official maximum-length conditions.
Ordo approbationis	Option 00 means agency approval is not required; do not substitute approval claims from suffix 01, 02 or 04.

Quaestiones Frequentes

Q1. How can I verify the quoted sensor is exactly 330500-01-00?

Match the full label and ordering code: 330500 is the Velomitor sensor, 01 is the 1/2-20 UNF mounting adapter and 00 means agency approval is not required.

Q2. How can I distinguish a new sensor from a used or refurbished unit?

Inspect the 316L case, 1/2-20 adapter, MIL-C-5015 connector, mounting face and label. New hardware should not show wrench marks, thread sealant, impact damage, connector wear, corrosion or relabeled approval data.

Q3. Quomodo verificare debemus ut venditor sit legitimus et fidus?

Verify the legal entity, address, domain email, bank beneficiary and traceable quotation. Require the quotation and invoice to state 330500-01-00 and identify the Bently Nevada 330500 Velomitor family.

Q4. Quae specificatio ab ingeniario confirmari debent antequam ematur?

Confirm the 1/2-20 UNF adapter, 25.3 x 63.2 mm envelope, 142 g weight, 100 mV/in/s sensitivity, 4.5 Hz to 5 kHz response, monitor bias supply, connector and option 00 approval scope.

Q5. Quae argumenta materialia ante solutionem petenda sunt?

Request time-stamped photos or video of the complete label, 1/2-20 adapter, 25.3 mm body, 63.2 mm height, mounting face and MIL-C-5015 connector.

Q6. Can another 330500 suffix or a 330525 replace this unit?

Not automatically. 330500 suffixes change mounting adapter and approvals, while 330525 has integral 1/4-18 NPT mounting and a different connector. Replacement requires documented mechanical, electrical and approval compatibility.

Modellos Recommandatos

6ES7400-1TA11-0AA0	SS832	6ES7288-5CM01-0AA0
CC-TAOX01	6ES7417-4HT14-0AB0	6ES7542-1AX00-0AB0
6ES7515-2RN03-0AB0	ASR133	AKB331
KJ3204X1-BA1	1756-EN3TR	6ES7292-1AH30-0XA0
AKB337	KJ3002X1-BF1	ATA4D
PM581-ETH	SM560-S-FD-1	CC-PDIL51
1769-L27ERM-QBFC1B	1756-L83EP	6ES7214-1AG40-0XB0
6ES7215-1BG40-0XB0	ATA4S	PM582-ETH
AO815	ADV559	PM5052-R-ETH
AAV141	CI858K01	6ES7215-1AF40-0XB0
TB561-ETH	TU833	DX561
1756-IB32	TU839	AO810V2
DI890	1756-L64	AFV30S
6ES7505-0RB00-0AB0	ACCC01	AI523
1756-RM2XT	VE3051C0	1756-L81ES
6EP3331-6SB00-0AY0	AI820	ANB10S
ATSS3S	CI853K01	CI521-MODTCP
5069-L320ERMS2	1756-L75	VE3012
6GK7542-5DX00-0XE0	6ES7153-4BA00-0XB0	CC-GAOX11
6ED1055-1FB00-0BA2	ASD143	TU811V1