ALL PRODUCTS

Bently Nevada 330500 Velomitor 330500-01-00 Piezo-velocity Sensor | Original New

Bently Nevada 330500 Velomitor 330500-01-00 Piezo-velocity Sensor | Original New

BENTLY NEVADA | 330500 VELOMITOR

330500-01-00

Velomitor Piezo-velocity Sensor with 1/2-20 UNF Mounting Adapter and No Agency Approval Option

CONFIGURATION: Velomitor piezo-velocity sensor | 1/2-20 UNF mounting thread adapter | Agency approval not required

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 330500 velomitor 330500 01 00 piezo velocity sensor-1

Overview
Technical Data
Inquiry
Configuration
Applications
Installation
Compatibility
FAQ
Recommend Models
Recommended Products

Bently Nevada 330500-01-00

Velomitor Piezo-velocity Sensor with 1/2-20 UNF Mounting Adapter and No Agency Approval Option. The complete ordering identity must remain associated with its documented mechanical, electrical, environmental and approval configuration.

Core selling point: Solid-state 100 mV/in/s velocity sensing with no moving parts and a 5 kHz upper response limit.

Official source: 141632 Rev. V, pages 1, 3, 4, 5, 7 and 11. Open datasheet PDF

Technical Data

Complete model	330500-01-00
Brand	Bently Nevada
Product family	330500 Velomitor Piezo-velocity Sensor
Product type	Piezo-velocity sensor
Dimensions	25.3 mm (0.995 in) diameter x 63.2 mm (2.49 in) height
Weight	142 g (5.0 oz), typical
Mounting adapter	01: 1/2-20 UNF
Sensitivity	3.94 mV/mm/s (100 mV/in/s) ±5%
Frequency response	4.5 Hz to 5 kHz ±3 dB; 6 Hz to 2.5 kHz ±0.9 dB
Velocity range	1270 mm/s (50 in/s) peak
Amplitude linearity	±2% to 152 mm/s (6 in/s) peak
Power requirements	-22 to -30 VDC; 2.5 to 6.0 mA bias current
Output bias voltage	-12 ±3 VDC referenced to pin A
Dynamic output impedance	Less than 2400 ohm
Connector	2-pin MIL-C-5015 hermetically sealed, 316L stainless-steel shell
Recommended cable length	Up to 63 m (208 ft) under the stated 50 g, 10 kHz and 200 pF/m conditions
Operating temperature	-55 to +121 °C (-67 to +250 °F)
Case material	316L stainless steel
Mounting torque	32 to 46 kg cm (24 to 40 in-lb) maximum
Agency approval option	00: approvals not required

Source: 141632 Rev. V, pages 1, 3, 4, 5, 7 and 11.

Inquiry

CONTACT STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Configuration

Model root	330500
Sensor type	Solid-state Velomitor piezo-velocity sensor
Mounting adapter	01 = 1/2-20 UNF
Connector	2-pin MIL-C-5015 hermetically sealed connector
Agency approval	00 = not required

Applications

Measure absolute vibration on bearing housings, machine casings and structural surfaces.

Use where direct velocity output simplifies monitoring of rotating machinery vibration.

The solid-state sensor may be mounted vertically, horizontally or at another qualified orientation.

Connect to compatible Bently Nevada monitors that provide the documented constant-current supply.

Installation

Mounting surface	Use a clean, flat, rigid surface and the 01 option 1/2-20 UNF adapter.
Torque	Apply 32 to 46 kg cm (24 to 40 in-lb) maximum mounting torque.
Cable routing	Use a compatible two-pin mating cable, protect the connector and keep routing clear of strain and high-energy interference.
Polarity	Pin A becomes positive with respect to pin B when the case moves toward the connector.

Compatibility

Monitor input	Compatible constant-current velocity input providing -22 to -30 VDC and 2.5 to 6.0 mA.
Mounting	1/2-20 UNF adapter execution; other adapter suffixes change the machine connection.
Cable and connector	Use a cable for the two-pin MIL-C-5015 connector and observe the official maximum-length conditions.
Approval scope	Option 00 means agency approval is not required; do not substitute approval claims from suffix 01, 02 or 04.

FAQ

Q1. How can I verify the quoted sensor is exactly 330500-01-00?

Match the full label and ordering code: 330500 is the Velomitor sensor, 01 is the 1/2-20 UNF mounting adapter and 00 means agency approval is not required.

Q2. How can I distinguish a new sensor from a used or refurbished unit?

Inspect the 316L case, 1/2-20 adapter, MIL-C-5015 connector, mounting face and label. New hardware should not show wrench marks, thread sealant, impact damage, connector wear, corrosion or relabeled approval data.

Q3. How should I verify that the supplier is legitimate and reliable?

Verify the legal entity, address, domain email, bank beneficiary and traceable quotation. Require the quotation and invoice to state 330500-01-00 and identify the Bently Nevada 330500 Velomitor family.

Q4. Which specifications should an engineer confirm before purchase?

Confirm the 1/2-20 UNF adapter, 25.3 x 63.2 mm envelope, 142 g weight, 100 mV/in/s sensitivity, 4.5 Hz to 5 kHz response, monitor bias supply, connector and option 00 approval scope.

Q5. What physical evidence should be requested before payment?

Request time-stamped photos or video of the complete label, 1/2-20 adapter, 25.3 mm body, 63.2 mm height, mounting face and MIL-C-5015 connector.

Q6. Can another 330500 suffix or a 330525 replace this unit?

Not automatically. 330500 suffixes change mounting adapter and approvals, while 330525 has integral 1/4-18 NPT mounting and a different connector. Replacement requires documented mechanical, electrical and approval compatibility.

Recommend Models

6ES7400-1TA11-0AA0	SS832	6ES7288-5CM01-0AA0
CC-TAOX01	6ES7417-4HT14-0AB0	6ES7542-1AX00-0AB0
6ES7515-2RN03-0AB0	ASR133	AKB331
KJ3204X1-BA1	1756-EN3TR	6ES7292-1AH30-0XA0
AKB337	KJ3002X1-BF1	ATA4D
PM581-ETH	SM560-S-FD-1	CC-PDIL51
1769-L27ERM-QBFC1B	1756-L83EP	6ES7214-1AG40-0XB0
6ES7215-1BG40-0XB0	ATA4S	PM582-ETH
AO815	ADV559	PM5052-R-ETH
AAV141	CI858K01	6ES7215-1AF40-0XB0
TB561-ETH	TU833	DX561
1756-IB32	TU839	AO810V2
DI890	1756-L64	AFV30S
6ES7505-0RB00-0AB0	ACCC01	AI523
1756-RM2XT	VE3051C0	1756-L81ES
6EP3331-6SB00-0AY0	AI820	ANB10S
ATSS3S	CI853K01	CI521-MODTCP
5069-L320ERMS2	1756-L75	VE3012
6GK7542-5DX00-0XE0	6ES7153-4BA00-0XB0	CC-GAOX11
6ED1055-1FB00-0BA2	ASD143	TU811V1