Pagina prima>Producta>EMERSON>EMERSON & EPRO Sensor
| VENDITE | Epistula electronica | Telephonum / WhatsApp |
|---|---|---|
| Iimus Pei | [email protected] | +86 18020776782 |
| Numerus Exemplaris | PR6423/010-020 CON021 |
| Familia producti | PR6423 |
| Typus Producti | catena sensorum currus eddys 8 mm |
| Constructio sensoris | Sensor Armatus Standardis M10x1 |
| Signal Converter | CON021 |
| Intervalum Mensurae Linearis | 2 MM |
| Interstitium Aēreum Initiale | 0.5 mm |
| Factor Scalae Incrementalis | 8 V/mm (203,2 mV/mil) ±5% |
| Factor de escala de temperatura | 0 à 45 °C |
| Deviatio Linearitatis | ±0,025 mm |
| Minimum Diametri Axis | 25 mm |
| Materies Obiecti | 42CrMo4 / AISI 4140 steel |
| Classis Protectionis | Sensor IP66 |
| Temperatura del sensor y del cable de 1 m | -35 a +180 grados C |
| Temperatura cable et connexi | -35 a +150 grados C |
| Materiale apex sensoris | PEEK |
| Materialis casus sensoris | Diver |
| Materies funiculi | PTFE |
| Pondus Sensoris cum Cavo 1 m | aproximadamente 100 g |
| Fīlum Cāpsae | M10X1 |
| Diameter Cavi Normalis | 2.8 mm |
| Diámetro del cable blindado | 6 mm |
| Faixa de frequência do conversor | 0 ad 20 kHz |
| Tempo de subida do conversor | Menos de 15 µs |
| Temperatura operativa del converter | -30 usque ad +100 gradus C |
| Converteris impulsus et vibratio | 5 g ad 60 Hz ad 25 gradus C |
| Alimentatio converteris pro -4 usque ad -20 V | -23 usque ad -32 V |
| Alimentatio converteris pro -2 usque ad -18 V | -21 usque ad -32 V |
| Konvertilo protekto | IP20 |
| Pondus Converteris | 120 g (approximative) |
| Converter Mounting | 4 × viti M5×20 |
| TERMINUS EMPTIO | Detalia |
|---|---|
| Minimum quantitas ordinis | 1 piece |
| Pretium | Contactus pro Jim |
| Singula Packaging | Novus Originalis, Sigillatus a Fabrica |
| Tempus Traditionis | 3–7 dies |
| Condiciones solutionis | T/T |
| Shipping modum | DHL / FedEx / UPS / TNT |
| Capacitas Supplicandi | Novus prorsus, in stock |
|
01
Generare campum currentium vorticis Converter excitat probam PR6423.
|
02
Sentire interstitium axis Motus obiecti mutat responsionem probae sine contactu.
|
|
03
Condere mensuram Converter congruens producit exoptatum effectum tensionis.
|
04
Alere canalum supervisionis Signum sustinet functiones displacement, positionis et protectionis machinarum.
|
|
2 MM
Campus Linearis
|
8 V/mm Factor Scalae |
CON021 Converter compactus |
| Mensura sine Contactu Nullum contactum mechanicum cum axe rotante requiritur. | Geometria mensurae definita Proba 8 mm ad axes minimi 25 mm specificatur. | Integritas catenae concordans Proba, cassis et CON021 simul ante substitutionem examinantur. |
| 01 | Which mounting construction is encoded by PR6423/010-020 CON021? | Standardis M10x1 armatus sensor est documentata dispositio mechanica. |
| 02 | What linear range is available from PR6423/010-020 CON021? | Sensor PR6423 habet intervallum mensurae linearis 2 mm. |
| 03 | Which shaft material is used to calibrate PR6423/010-020 CON021? | The standard target is 42CrMo4 / AISI 4140 ferromagnetic steel. |
| 04 | Why must the CON021 remain matched with PR6423/010-020 CON021? | Probe and cable characteristics form part of the converter calibration path. |
| 05 | What gap is used when commissioning PR6423/010-020 CON021? | The official sensor sheet gives a 0.5 mm initial air gap; final setup follows the channel procedure. |
| 06 | Quae mensurationes machinae rotantis ad PR6423/010-020 CON021 idoneae sunt? | It supports radial or axial displacement, position, eccentricity and speed-reference duties. |
| MA1479A | KMS15-24 | ARV-006A-000 |
| EX-D16A3-R08 | ILAN485 | EB401-10 |
| ANN840 | ECM-77BC | LP-XP91D03-000C |
| TTS-SD-LCD-B-1 | GMP201-C | ET901-AC |
| ASD-PL3-IV | MB-6279 | VT5400 |
| AM/EB0000000B | MMC-QR030024-02LD00A | ASC-402 |
| TS5810N | DDNI485 | CRT341 |
| QL-SW420 | ZE301 | DR1313A |
| MODG2-12LC-SM-PT | K9403TR-03 | P11096 |
| M-IN-M201.07 | DDRC820FR | HD110C |
| Duc001 | B3851 | SK41-32 |
| SB522A | DDBC1200 | APL31-0B9 |
| Mid2E-800 | ECC-520 | EPX420D |
EN
