| SALES | PHONE / WHATSAPP | |
|---|---|---|
| Jim Pei | [email protected] | +86 18020776782 |
| Model Number | PR6423/010-020 CON021 |
| Product Family | PR6423 |
| Product Type | 8 mm eddy current sensor chain |
| Sensor Construction | Standard M10x1 armored sensor |
| Signal Converter | CON021 |
| Linear Measurement Range | 2 mm |
| Initial Air Gap | 0.5 mm |
| Incremental Scale Factor | 8 V/mm (203.2 mV/mil) +/-5% |
| Scale-Factor Temperature | 0 to 45 degrees C |
| Linearity Deviation | +/-0.025 mm |
| Minimum Shaft Diameter | 25 mm |
| Target Material | 42CrMo4 / AISI 4140 steel |
| Protection Class | IP66 sensor |
| Sensor and 1 m Cable Temperature | -35 to +180 degrees C |
| Cable and Connector Temperature | -35 to +150 degrees C |
| Sensor Tip Material | PEEK |
| Sensor Case Material | Stainless steel |
| Cable Material | PTFE |
| Sensor Weight with 1 m Cable | 100 g approximate |
| Case Thread | M10x1 |
| Standard Cable Diameter | 2.8 mm |
| Armored Cable Diameter | 6 mm |
| Converter Frequency Range | 0 to 20 kHz |
| Converter Rise Time | Less than 15 us |
| Converter Operating Temperature | -30 to +100 degrees C |
| Converter Shock and Vibration | 5 g at 60 Hz at 25 degrees C |
| Converter Supply for -4 to -20 V | -23 to -32 V |
| Converter Supply for -2 to -18 V | -21 to -32 V |
| Converter Protection | IP20 |
| Converter Weight | 120 g approximate |
| Converter Mounting | 4 x M5x20 screws |
| PURCHASING TERM | DETAILS |
|---|---|
| Minimum Order Quantity | 1 Piece |
| Price | Contact for Jim |
| Packaging Details | Original new Factory Sealed |
| Delivery Time | 3–7 Days |
| Payment Terms | T/T |
| Shipping Method | DHL / FedEx / UPS / TNT |
| Supply Ability | Brand new, In Stock |
|
01
Generate the eddy-current fieldThe converter excites the PR6423 probe.
|
02
Sense the shaft gapTarget movement changes the probe response without contact.
|
|
03
Condition the measurementThe matched converter produces the configured voltage output.
|
04
Feed the monitoring channelThe signal supports displacement, position and machinery-protection functions.
|
|
2 mm
Linear range
|
8 V/mm
Scale factor |
CON021
Compact converter |
| Non-contact measurementNo mechanical contact is required with the rotating shaft. | Defined measurement geometryThe 8 mm probe is specified for shafts of at least 25 mm. | Matched chain integrityProbe, cable and CON021 are checked together before replacement. |
| 01 | Which mounting construction is encoded by PR6423/010-020 CON021? | Standard M10x1 armored sensor is the documented mechanical arrangement. |
| 02 | What linear range is available from PR6423/010-020 CON021? | The PR6423 sensor has a 2 mm linear measurement range. |
| 03 | Which shaft material is used to calibrate PR6423/010-020 CON021? | The standard target is 42CrMo4 / AISI 4140 ferromagnetic steel. |
| 04 | Why must the CON021 remain matched with PR6423/010-020 CON021? | Probe and cable characteristics form part of the converter calibration path. |
| 05 | What gap is used when commissioning PR6423/010-020 CON021? | The official sensor sheet gives a 0.5 mm initial air gap; final setup follows the channel procedure. |
| 06 | Which rotating-machine measurements suit PR6423/010-020 CON021? | It supports radial or axial displacement, position, eccentricity and speed-reference duties. |
| MA1479A | KMS15-24 | ARV-006A-000 |
| EX-D16A3-R08 | ILAN485 | EB401-10 |
| ANN840 | ECM-77BC | LP-XP91D03-000C |
| TTS-SD-LCD-B-1 | GMP201-C | ET901-AC |
| ASD-PL3-IV | MB-6279 | VT5400 |
| AM/EB0000000B | MMC-QR030024-02LD00A | ASC-402 |
| TS5810N | DDNI485 | CRT341 |
| QL-SW420 | ZE301 | DR1313A |
| MODG2-12LC-SM-PT | K9403TR-03 | P11096 |
| M-IN-M201.07 | DDRC820FR | HD110C |
| Duc001 | B3851 | SK41-32 |
| SB522A | DDBC1200 | APL31-0B9 |
| Mid2E-800 | ECC-520 | EPX420D |
EN
