Omnia producta

Emerson DeltaV M-series KJ3002X1-BE1 8-Channel 4-20 mA HART Analog Output Card | Original New

Emerson DeltaV M-series KJ3002X1-BE1 8-Channel 4-20 mA HART Analog Output Card | Original New

Emerson | DeltaV M-series

KJ3002X1-BE1

AO, 8-Channel, 4-20 mA, HART Card

Caracteristica Principalis: Eight optically isolated 4-20 mA HART output channels.
KEY SELECTION: 1–23 mA full signal range | A4 card keying | Standard, fused, or 16-pin mass termination
Tempus ducens: In stock | Garantia: unum annum

Inquisitio per epistulam electronicam [email protected]

WhatsApp +86 18159889985

Appurtenance:

Conspectus
Data Technica
Inquisitio
Model verification
Compatibilitas
Installatio
Procurement Checks
Quaestiones Frequentes
Modellos Recommandatos
Producta commendata

KJ3002X1-BE1 is the complete legacy marking supplied for an Emerson DeltaV M-series 8-channel analog output position. The selected official Emerson Product Data Sheet specifies the AO function as eight 4-20 mA HART channels with optical isolation, A4 keying, and compatible I/O, fused, and 16-pin mass terminal blocks. The March 2026 ordering table does not separately list this legacy complete marking, so the nameplate and terminal block should be verified independently.

Data Technica

Parametrum	Official specification
Modello completo	KJ3002X1-BE1
Nota	Emerson
Familia producti	DeltaV M-Series I/O traditionalis
Typus Producti	Carta de output analogic, 8 canales, 4-20 mA, HART
Numerus canalium	Octo
Intervalum Signorum Nominalium	4 ad 20 mA
Plenus signi ambitus	1 ad 23 mA
Isolatio	Cada canal isolat opticamente del sistema; probat in fabrica a 1500 V DC
Correns LocalBus	100 mA typical; 150 mA maximum a 12 V DC nominal
Alimentazione circuito di campo	300 mA maximum a 24 V DC (+/-10%)
Accuratio super Temperatura	0.25% del span
Resolutio	12-bit
Output Compliance	20 mA a 21.6 V DC de alimentation in un carico de 700 ohms
Calibration	Information immagasinat in carta
Fusibile opzionale	2.0 A
Clavium inscriptionis	A4
Compatibilitas ad terminales	Bloc de terminal I/O; bloc de terminal fusibil; bloc de terminacion massal de 16 pins
Dimensiones	H 10.7 cm x L 4.1 cm x P 10.5 cm (specificacion commun pro omnes interfaces I/O de serie M)
Pondus	Non publicat separatim pro KJ3002X1-BE1 in le documento official seligite
Aestimatio Protectionis	IP20
Temperatura operativa	-40 ad 70 °C (-40 ad 158 °F)
Temperatura servandae	-40 ad 85 °C (-40 ad 185 °F)
Humiditas relativa	5 ad 95 %, non condensans
Contamināntēs aerīs trānsportātī	ISA-S71.04-1985 Classis G3; conformal coating
Certificationes	CE, FM, CSA, ATEX, IEC-Ex, et certificatiōnēs marīnae ad M-seriem Traditional I/O sunt; verificāre exactās notātiōnēs prōductī

Basis fontis: Emerson DeltaV M-series Documentum Data Productus I/O Traditionalis, Martius 2026. Tabula ordinandi praesens functionem AO octo-channelis eandem specificat, sed non separatim notat antiquam designationem integram KJ3002X1-BE1.

Inquisitio

Contactus

Stella

Inquisitio per epistulam electronicam [email protected]

WhatsApp +86 18159889985

Model verification

Designatio integra
Adaequare omnem characterem: KJ3002X1-BE1. Notare titulum Emerson aut Fisher-Rosemount, identificativum confectionis, versionem, et blocum terminalium ad unitatem aptatum.

Ambitus documenti officialis
PDS Emerson mensis Martii 2026 specificat functionem AO octo-channelis 4-20 mA HART et suam clavem A4 pro bloco terminalium. Non separatim notat KJ3002X1-BE1 in tabula ordinandi praesenti; ergo codex VE praesens non debet proponi ut idem modello completo sine confirmatione ab Emerson.

Compatibilitas

Systema	Selection Check
Controller et vectis	I/O Traditionalis seriei M requirit controllers MQ, MX, aut PK et vectes horizontales aut VerticalPlus seriei M.
Positio cartae	AO, octo-channelis, 4-20 mA, HART utitur clava A4 pro carta I/O.
Terminatio	Optiones compatibiles: blocus terminalis I/O, blocus terminalis cum fusibilibus, aut blocus terminationis massivus 16-pin.

Installatio

1. Praepara vectorem
Installa vectorem interfacialis I/O seriei M in superficie montata in raeda DIN et confirma typum controlleris et vectoris requirendum.

2. Verifica clavem A4
Postuli clavis impediunt insertionem cartae I/O incorrectae. Confirma A4 antequam cartam insereas.

3. Conecte blocum terminalis
Bloxus terminalis praefundi potest antequam carta I/O insitatur. Utere dispositione standardi approbata, cum fusibilibus, aut dispositione terminationis massivae 16-pin.

4. Sequere proceduras regionis
In areis periculosis, sequere instructiones Emerson pro installatione Classis I Divisionis 2 vel Zonae 2 applicabiles et verifica exacta signa producti.

Procurement Checks

Probatio postulanda ante solutionem

Clear current photos of the front and side labels showing KJ3002X1-BE1, assembly and revision identifiers, A4 keying, terminal block type, seals, and connector condition.

Engineering checks: eight output channels, 4-20 mA HART function, 24 V DC field circuit supply basis, A4 keyed slot, terminal-block compatibility, carrier type, DeltaV software context, and hazardous-area markings when applicable.

Supplier checks: verify legal company identity, consistent banking details, traceable quotation, written condition statement, and a return or inspection agreement. Do not treat stock, testing, warranty, or certification claims as confirmed without evidence.

Quaestiones Frequentes

Q1. How can I verify that a quotation is for the exact KJ3002X1-BE1 model?

Require a legible nameplate photo showing the complete KJ3002X1-BE1 marking, plus the assembly and revision identifiers. Confirm that the quoted hardware is an eight-channel 4-20 mA HART analog output card and that the fitted terminal block matches the A4-keyed interface.

Q2. How can I distinguish New, Used, and Refurbished KJ3002X1-BE1 hardware?

Ask for current high-resolution photos of the label, housing, connector, key posts, terminal screws, seals, and packaging. New status should be supported by intact packaging and traceability; wear, replaced labels, cleaned terminals, or mixed revisions require a written condition explanation.

Q3. Quomodo inspicere debeo an supplicator legitimus et fidus sit?

Verify the registered company name, address, domain, banking beneficiary, quotation history, and independent business references. Ask the supplier to photograph the same KJ3002X1-BE1 unit with a dated identifier and to document the inspection or return terms.

Q4. What should an engineer confirm before purchasing KJ3002X1-BE1?

Confirm eight 4-20 mA HART output channels, 1-23 mA full signal range, 24 V DC field-circuit basis, 100 mA typical LocalBus current, 300 mA maximum field circuit power, A4 keying, terminal-block type, M-series carrier, and required area approvals.

Q5. Quae argumenta materialia ante solutionem petenda sunt?

Request front, side, and connector photos; close-ups of KJ3002X1-BE1, assembly and revision labels; A4 keying; the terminal-block identifier; channel and status indicators; packaging; and a dated image tying the hardware to the quotation.

Q6. Can a similar suffix or current VE ordering code replace KJ3002X1-BE1?

Do not assume interchangeability. The current Emerson PDS publishes VE4005-series ordering codes for the same eight-channel AO function but does not separately list KJ3002X1-BE1. Confirm DeltaV version, carrier, A4 keying, terminal block, revision, redundancy requirements, and Emerson compatibility before substitution.

Modellos Recommandatos

Modellum	Modellum	Modellum
PM861AK01	A2FV70S	6ES7222-1BH32-0XB0
KJ3001X1-BA1	DI524	VE4005S2B4
CC-GAOX21	CC-PAOH01	DI830
TC-FXX132	1769-L33ERM	5069-L306ER
DO562	AAB842	ADV561
CC-PAIX01	KJ3201X1-BA1	PM867K01
1756-EN2TR	5069-L306ERMS2	ADV559
CC-TDOB01	VI702	ARS55M
ASD143	6ES7222-1BF32-0XB0	CI868K01
VE4035S2B4	KJ2003X1-BB1	6ES7331-7NF00-0AB0
VE3051C2	6ES7288-1CR40-0AA0	CC-PCNT02
ADV869	KJ2005X1-MQ1	KJ3241X1-BA1
1756-PB72	CC-GAIX11	AI825
ARM55D	ADV551	6ES7534-7QE00-0AB0
CC-PCNT03	CC-TCNT02	1756-PA75
KJ3002X1-BH1	6ES7518-4FX00-1AC0	6ES7292-1AH30-0XA0
1756-L71	6ES7288-1ST30-0AA1	TU839
TU830V1	6ED1052-1MD08-0BA2	CC-PUIO01
KJ3204X1-BA1	PM590-ETH	1756-CN2R
1756-A4	5069-L320ERMS2	6ES7231-5PD32-0XB0