ALL PRODUCTS

Emerson DeltaV M-series KJ3002X1-BE1 8-Channel 4-20 mA HART Analog Output Card | Original New

Emerson DeltaV M-series KJ3002X1-BE1 8-Channel 4-20 mA HART Analog Output Card | Original New

EMERSON | DELTAV M-SERIES

KJ3002X1-BE1

AO, 8-Channel, 4-20 mA, HART Card

CORE FEATURE: Eight optically isolated 4-20 mA HART output channels.
KEY SELECTION: 1-23 mA full signal range | A4 card keying | Standard, fused, or 16-pin mass termination
LEAD TIME: In stock | WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

Overview
Technical Data
Inquiry
Model Verification
Compatibility
Installation
Procurement Checks
FAQ
Recommend Models
Recommended Products

KJ3002X1-BE1 is the complete legacy marking supplied for an Emerson DeltaV M-series 8-channel analog output position. The selected official Emerson Product Data Sheet specifies the AO function as eight 4-20 mA HART channels with optical isolation, A4 keying, and compatible I/O, fused, and 16-pin mass terminal blocks. The March 2026 ordering table does not separately list this legacy complete marking, so the nameplate and terminal block should be verified independently.

Technical Data

Parameter	Official specification
Complete model	KJ3002X1-BE1
Brand	Emerson
Product family	DeltaV M-series Traditional I/O
Product type	Analog output card, 8-channel, 4-20 mA, HART
Number of channels	Eight
Nominal signal range	4 to 20 mA
Full signal range	1 to 23 mA
Isolation	Each channel optically isolated from the system; factory tested to 1500 V DC
LocalBus current	100 mA typical; 150 mA maximum at 12 V DC nominal
Field circuit power	300 mA maximum at 24 V DC (+/-10%)
Accuracy over temperature	0.25% of span
Resolution	12-bit
Output compliance	20 mA at 21.6 V DC supply into 700 ohms load
Calibration	Information stored on card
Optional fuse	2.0 A
Card keying	A4
Terminal block compatibility	I/O terminal block; fused terminal block; 16-pin mass termination block
Dimensions	H 10.7 cm x W 4.1 cm x D 10.5 cm (common specification for all M-series I/O interfaces)
Weight	Not separately published for KJ3002X1-BE1 in the selected official document
Protection rating	IP20
Operating temperature	-40 to 70 deg C (-40 to 158 deg F)
Storage temperature	-40 to 85 deg C (-40 to 185 deg F)
Relative humidity	5 to 95%, non-condensing
Airborne contaminants	ISA-S71.04-1985 Class G3; conformal coating
Certifications	CE, FM, CSA, ATEX, IEC-Ex, and marine certifications are available for M-series Traditional I/O; verify exact product markings

Source basis: Emerson DeltaV M-series Traditional I/O Product Data Sheet, March 2026. The current ordering table specifies the same eight-channel AO function but does not separately list the legacy complete marking KJ3002X1-BE1.

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Model Verification

Complete marking
Match every character: KJ3002X1-BE1. Record the Emerson or Fisher-Rosemount label, assembly identifier, revision, and terminal block fitted to the unit.

Official-document scope
The March 2026 Emerson PDS publishes specifications for the eight-channel AO 4-20 mA HART function and its A4 terminal-block keying. It does not separately list KJ3002X1-BE1 in the current ordering table, so a current VE ordering code must not be presented as the same complete model without Emerson confirmation.

Compatibility

System	Selection check
Controller and carrier	M-series Traditional I/O requires MQ, MX, or PK controllers and M-series horizontal or VerticalPlus carriers.
Card position	AO, 8-channel, 4-20 mA, HART uses A4 I/O card keying.
Termination	Compatible choices: I/O terminal block, fused terminal block, or 16-pin mass termination block.

Installation

1. Prepare the carrier
Install the M-series I/O interface carrier on a DIN-rail-mounted surface and confirm the required controller and carrier type.

2. Verify A4 keying
The key posts prevent insertion of an incorrect I/O card. Confirm A4 before installing the card.

3. Wire the terminal block
The terminal block may be pre-wired before I/O card installation. Use the approved standard, fused, or 16-pin mass termination arrangement.

4. Follow area procedures
In hazardous areas, follow the applicable Emerson Class I Division 2 or Zone 2 installation instructions and verify exact product markings.

Procurement Checks

Evidence to request before payment

Clear current photos of the front and side labels showing KJ3002X1-BE1, assembly and revision identifiers, A4 keying, terminal block type, seals, and connector condition.

Engineering checks: eight output channels, 4-20 mA HART function, 24 V DC field circuit supply basis, A4 keyed slot, terminal-block compatibility, carrier type, DeltaV software context, and hazardous-area markings when applicable.

Supplier checks: verify legal company identity, consistent banking details, traceable quotation, written condition statement, and a return or inspection agreement. Do not treat stock, testing, warranty, or certification claims as confirmed without evidence.

FAQ

Q1. How can I verify that a quotation is for the exact KJ3002X1-BE1 model?

Require a legible nameplate photo showing the complete KJ3002X1-BE1 marking, plus the assembly and revision identifiers. Confirm that the quoted hardware is an eight-channel 4-20 mA HART analog output card and that the fitted terminal block matches the A4-keyed interface.

Q2. How can I distinguish New, Used, and Refurbished KJ3002X1-BE1 hardware?

Ask for current high-resolution photos of the label, housing, connector, key posts, terminal screws, seals, and packaging. New status should be supported by intact packaging and traceability; wear, replaced labels, cleaned terminals, or mixed revisions require a written condition explanation.

Q3. How should I check whether a supplier is legitimate and reliable?

Verify the registered company name, address, domain, banking beneficiary, quotation history, and independent business references. Ask the supplier to photograph the same KJ3002X1-BE1 unit with a dated identifier and to document the inspection or return terms.

Q4. What should an engineer confirm before purchasing KJ3002X1-BE1?

Confirm eight 4-20 mA HART output channels, 1-23 mA full signal range, 24 V DC field-circuit basis, 100 mA typical LocalBus current, 300 mA maximum field circuit power, A4 keying, terminal-block type, M-series carrier, and required area approvals.

Q5. What physical evidence should be requested before payment?

Request front, side, and connector photos; close-ups of KJ3002X1-BE1, assembly and revision labels; A4 keying; the terminal-block identifier; channel and status indicators; packaging; and a dated image tying the hardware to the quotation.

Q6. Can a similar suffix or current VE ordering code replace KJ3002X1-BE1?

Do not assume interchangeability. The current Emerson PDS publishes VE4005-series ordering codes for the same eight-channel AO function but does not separately list KJ3002X1-BE1. Confirm DeltaV version, carrier, A4 keying, terminal block, revision, redundancy requirements, and Emerson compatibility before substitution.

Recommend Models

Model	Model	Model
PM861AK01	A2FV70S	6ES7222-1BH32-0XB0
KJ3001X1-BA1	DI524	VE4005S2B4
CC-GAOX21	CC-PAOH01	DI830
TC-FXX132	1769-L33ERM	5069-L306ER
DO562	AAB842	ADV561
CC-PAIX01	KJ3201X1-BA1	PM867K01
1756-EN2TR	5069-L306ERMS2	ADV559
CC-TDOB01	VI702	ARS55M
ASD143	6ES7222-1BF32-0XB0	CI868K01
VE4035S2B4	KJ2003X1-BB1	6ES7331-7NF00-0AB0
VE3051C2	6ES7288-1CR40-0AA0	CC-PCNT02
ADV869	KJ2005X1-MQ1	KJ3241X1-BA1
1756-PB72	CC-GAIX11	AI825
ARM55D	ADV551	6ES7534-7QE00-0AB0
CC-PCNT03	CC-TCNT02	1756-PA75
KJ3002X1-BH1	6ES7518-4FX00-1AC0	6ES7292-1AH30-0XA0
1756-L71	6ES7288-1ST30-0AA1	TU839
TU830V1	6ED1052-1MD08-0BA2	CC-PUIO01
KJ3204X1-BA1	PM590-ETH	1756-CN2R
1756-A4	5069-L320ERMS2	6ES7231-5PD32-0XB0