Omnia producta

Siemens 6DL1134-6TH00-0PH1 ET 200SP HA AI 16×I 2-Wire HART Module

Siemens 6DL1134-6TH00-0PH1 ET 200SP HA AI 16×I 2-Wire HART Module

Nomen producti: ET 200SP HA AI 16×I 2-Wire HART Module

Nomen Marcae: Siemens

Numerus Modeli: 6DL1134-6TH00-0PH1

Locus Originis: Germania

Garantia: 12 Mensis

Whatsapp: +86 18020776782

Inscriptio electronica: [email protected]

Appurtenance:

Conspectus
HART Integration
Diagnostics & Control
Specificationes
Commercial Term
INFORMATIO CONTACTUS
Quaestiones Frequentes
Other Products
Producta commendata

Sixteen-channel HART analog input for high-availability process I/O and channel-level diagnostics

The Siemens ET 200SP HA module accepts sixteen 0/4–20 mA two-wire transmitter signals with HART communication, 16-bit conversion, per-channel diagnostics and support for redundant operation with the appropriate M1 terminal block.

Process-I/O check Confirm terminal-block type, color code CC01, redundancy arrangement, sensor supply load, HART or MultiHART data use, PCS 7 or TIA Portal integration and every channel assignment before ordering 6DL1134-6TH00-0PH1.

HART Integration

6DL1134-6TH00-0PH1 est un module d’entrée analogique compact ET 200SP HA de 22,5 mm pour seize transmetteurs de courant à deux fils. Il prend en charge les plages 0–20 mA et 4–20 mA, la communication HART, le lissage spécifique par canal ainsi que deux alarmes supérieures et deux alarmes inférieures.

Un remplacement doit préserver la compatibilité du bloc de bornes, le câblage par canal, l’alimentation des transmetteurs, les variables HART, les diagnostics et la configuration redondante. La spécification officielle autorise la reparamétrisation en mode RUN et la redondance avec le type de bloc de bornes M1.

Conserver à la fois les valeurs analogiques cycliques et les données du dispositif HART utilisées par le système de commande de procédé.

Mappatio canalium

Documenter chaque étiquette de transmetteur, position du bornier, plage de courant, échelle d’ingénierie et adresse HART.

Données du système de procédé

Vérifier si le projet utilise HART standard, MultiHART, des variables secondaires ou des diagnostics de gestion d’actifs.

Blocculus terminalem

Adapter le bloc de bornes installé (H1, M1, N0, H0 ou M0) et vérifier si la redondance exige le type M1.

Diagnostics & Control

Alarmae ad canalium auxiliantur ut defectus transmitteris, connexionum, potentiae et configurationis separentur.

Examinationes circuitus currentis

Cursum circuitus metire secure et supplitium transmitteris, polaritatem, scutum et continuitatem cavi inspicere antequam modulus substituatur.

Ordo diagnosticus

Ut rupturam fili, circuitum curtum, excessum aut defectum range detegere, utere LED canalium, LED DIAG moduli et nuntiis systematis.

Manutentio in RUN

Quamlibet reparameterizationem vel substitutionem redundantem cum procedura plantae coordinare et valorem processus verificare antequam canalis ad servitium redatur.

Specificationes

Designatio generis producti	AI 16 × I 2-filorum mA HART
Numerus ordinis	6DL1134-6TH00-0PH1
INPUTUS ANALOGI	16 introitus currentis
Limites Ingressus	0–20 mA et 4–20 mA
Resolutio	Usque ad 16 bit inclusa signo
Resistentia input	250 Ω
Accuratitas Mensurationis	±0.1% error basicus ad 25 °C
Coniunctio Transmitteris	Two-wire current transmitters with HART
Diagnosis	Supply, wire break, short circuit, overflow and underflow
Redundantia	Supported with terminal block M1
Copia ambitus	19,2 ad 28,8 V CC
Temperatura operativa	-40 ad +70 °C horizontaliter; -40 ad +60 °C verticaliter

Commercial Term

Praeoffertio

Pretium praesens et disponibilitas

Solutio

T/T aut condicionibus conventis

Tempus praecedens

Confirmatum cum citatione

Navigatio

DHL, FedEx, UPS aut oneribus conventis

Garantia

12 Mensis

INFORMATIO CONTACTUS

Contactus

Iimus Pei

[email protected]

+86 180 2077 6782

Quaestiones Frequentes

How should I verify that 6DL1134-6TH00-0PH1 matches my ET 200SP HA station?

Compare the exact order number, terminal-block type and color code, firmware, redundancy requirement, engineering version, 24 V DC supply and all sixteen channel assignments.

What should I archive before replacing 6DL1134-6TH00-0PH1?

Save the PCS 7, PCS neo, STEP 7 or TIA Portal project and export the channel ranges, filters, alarm limits, HART tags, secondary-variable mapping, diagnostics and redundancy configuration.

Why can one input on 6DL1134-6TH00-0PH1 show an underrange or wire-break alarm?

Check the transmitter supply, loop polarity, terminal seating, cable continuity and actual current. Compare the configured 0–20 mA or 4–20 mA range and verify that the transmitter is not in a fault state.

Quid facere debeo, si communicatio HART per 6DL1134-6TH00-0PH1 non disponibilis est, sed valor currentis correctus est?

Confirmare debes HART pro illo canali esse activatum, transmitterem compatibilem et impedantiam circuiti verificare, rumorem et scutum inspicere, atque configuratum numerum HART et viam ad gestionem activorum examinare.

Quomodo 6DL1134-6TH00-0PH1 in ordinatione processus-I/O redundantis substituere debes?

Proceduram plantae approbatam sequere, vias activam et stand-by identificare, terminalem M1 et statum redundancy confirmare, solum permisum modulum commutare, et postea omnes valores processus et diagnosticos verificare.

Quae informationes praebere debes, cum 6DL1134-6TH00-0PH1 pro stock maintenance petis?

Numerum ordinis exactum, firmware, stationem ET 200SP HA et modulum interfaciale, typum terminalis, platformam projecti, usum redundancy, necessitatem HART, numerum canalium et imagines claras et bene annotatas praebere debes.

Other Products

PCO3000AL0	PR24D06-2CO-M-B5/P	SMT-CD-R20
102F	ABB 1SAP250600R0001 1SAP212200R0101	DM92
621-9933C	407860	TVD100-PBA
NCN216A	RPT-BL-DEMO	4GSTLS
CAM301	CR123H055A	D4S-AV1115DN-3312
901-T300-WW01	C62371 C62372	DSI-A/DS
PSI-MOS-RS232/FO	DM-TX-4K-302-C	XBC-DN20SU
AV3116DNv1	WLP150H	D4S-AV2115DN-3312
GE GT103C08 675150	LSXA3K-1A	DCN-FBP-D
ABB CI502 / 1SAP220700R0001	IC915 IR2I00TBD300	GCU-HOSP-1