Pagina prima>Producta>Siemens
Processator de communicationes basic SIMATIC NET CP 1430 TF
| Minimum quantitas ordinis | 1 piece |
| Pretium | Contactus pro Jim |
| Singula Packaging | Novus Originalis, Sigillatus a Fabrica |
| Tempus Traditionis | 3–7 dies |
| Condiciones solutionis | T/T |
| Shipping modum | DHL / FedEx / UPS / TNT |
| Capacitas Supplicandi | Novus prorsus, in stock |
| Numerus Exemplaris | 6GK1143-0TA02 |
| Rete | SINEC H1 / H1FO Industrial Ethernet |
| Processor | 80386 SX, 20 MHz |
| Controller Ethernet | 82596 SX, 20 MHz |
| Ethernet serial interface | 82503 |
| AUI transmission rate | 10 Mbit/s |
| TP transmission rate | 10 Mbit/s |
| AS511 TTY rate | 9 600 bit/s |
| 5 V supply tolerance | ±5% |
| 24 V supply tolerance | +25% / -15% |
| Maxima currentis 5 V | 2.7 A ad oneris transceptoris specificati |
| Maxima correns 24 V | 70 mA |
| Correns ad auxilium batteriae | 20 µA typice; 110 µA maxime |
| Oneris transceptoris notatum, quod ad datos de corrente utitur | 0,5 A |
| Coniunctio Dorso | ES902, duo connexiones 48-pin in ordine secundo |
| Connettore PG | D-sub 15-pin cum vitis firmandis |
| Connextio AUI / TP | D-sub 15-pin cum lamina firmanda |
| Ingressus Praesidium | IP00 |
| Temperatura operativa | 0–60 °C, sine ventili |
| Temperatura servandi et transportandi | −40 ad +70 °C |
| Humidity at 25 °C | 95 %, non condensans |
| Altissima Altitude Operationis | 3 000 m |
| Configuration environment | NCM COM 1430 TF on S5-DOS/ST V6.x |
| PG adapter support | 6ES5 734-1BD20 for 0TA02 |
| EMC emission standard | EN 50081-2:1993 |
| Industrial EMC immunity | EN 50082-2:1995 |
| VENDITE | Epistula electronica | Telephus WhatsApp |
|---|---|---|
| Iimus Pei | [email protected] | +86 18020776782 |
Siemens 6GK1143-0TA02 is the SIMATIC NET CP 1430 TF Basic communications processor. It provides the CP communication path between a supported SIMATIC S5 installation and the SINEC H1 industrial network. The module incorporates its own processor and Ethernet controller. Its front connectors provide the programming and network interfaces described for the CP hardware. NCM COM 1430 TF supplies the configuration and test environment.
The 6GK1143-0TA02 is intended for maintaining an existing CP 1430 TF Basic installation. The loaded connection database and PLC synchronization sequence are important to its communication behavior. Hardware-interface and software compatibility should be preserved during replacement. A commissioning plan should retain the original configuration and job assignments. This communications processor is distinct from the Extended CP 1430 TF variant.
Connect the supported SIMATIC S5 installation to its configured SINEC H1 communication network.
Handle the communication jobs defined in the CP connection database and synchronized by the PLC.
Use the supported PG connection and NCM COM environment for configuration, startup and communication testing.
No. This order number identifies the Basic variant; confirm the required variant before substitution.
Traffico dati CP manet inactivus donec completum sit synchronizatio PLC requisita.
Mutatio modi potest conexiones delere et rursus constituere, atque data bufferata amittere; ideo ordinem reinitiationis praeparare oportet.
Servare oportet databasem conexionum CP, numeros interfacium et attributiones operum communicationis PLC.
In informationibus de producto 0TA02 inter variantes enumeratur quae caleam adaptatoris 6ES5 734-1BD20 specificatam supportant.
Non. Verificare oportet exactam variantem processus, necessitates conversionis configurationis et hardware communicationis installatum.
Cum 20+ ani de experientia in industrie, servim clienti din intreaga lume si am construit relatii pe termen lung in Regatul Unit, Rusia, Emiratele Arabe Unite, India, Venezuela si multe alte tari.
Our experienced team provides reliable pre-sales and after-sales support, helping customers select suitable products and resolve purchasing concerns.
Nos suministramus marcas líderes en automatización, incluyendo PLC, DCS, módulos de E/S, variadores, motores, fuentes de alimentación, módulos de comunicación, y más.
Una amplia gama de productos está disponible de inmediato, incluyendo piezas discontinuadas, obsoletas y de difícil localización, lo que ayuda a reducir el tiempo de adquisición.
Valoramos la cooperación a largo plazo y tratamos a cada cliente con honestidad, respeto, responsabilidad y atención.
Desde una sola pieza de repuesto hasta proyectos completos de automatización, estamos listos para satisfacer sus necesidades y construir una asociación duradera.
Plurima producta sub iure garantiae usque ad 12 menses cadunt, secundum condiciones et clausulas applicabiles. Si quodcumque problema cum producto durante periodum garantiae accidat, nostrum turma tibi adiuvabit et solutionem idoneam praebet.
Tabulae technicae pertinentes et litteratura technica una cum mercibus praebiri possunt, ut informationes utiles pro identificatione producti, installatione, operatione et manutentione offerantur.
Nos cognoscimus momenti magnitudinem ut tempus in quo machinae non operantur minuatur. Noster grex celeriter respondet ad quaestiones et praebet auxilium peritum de informationibus de productis, pretiis, statu ordinum, expeditione et quaestionibus post venditionem.
Nos servimus clientes per totum orbem et praebemus auxilium fidele ab initio quaestionis usque ad expeditionem et post venditionem, certificantes communicationem claram et tempestivam per totum processum.
Nos continuo quaerimus partes automationis quae desierunt produci, obsoletae sunt aut invenire difficile est ex variis brandis, adiuvantes clientes ut machinas iam existentes conservent et tempus in quo non operantur minuant propter defectum partium de reposito.
| QTS00-008 | MX-FP02S | JRBS-57-8 |
| AKM115SF132 | RHT-WM-485-LCD | LNL-2220 |
| EXD5314CE | MIC-1000 | W28102J022A |
| CAN-5902 | DAD4-CBL-OBD-01 | ID11C00TCA300 |
| PCD7.D230 | XEV22D-1P2CO | ZE544-001A-210 |
| LF1B-NC3P-2THWW2-1M | PCO3000AS0 | MODG2-12LC-SM-PT |
| FMZ5000 | CMD5B2000 | KN703-C |
| A160048-00 | PCO5000000AS0 | ILAN485 |
| KP551 | PCS090 | TPNN0077 |
| SPAC-H450-W-US | PC03000AM0 | SD55X |
| GD250W4N | BMTI5 | E9733CB-00 |
| LNL-1100 | SMT-CD-R20 | BT-0D-HL-1 |
| CT7126 | MCI-211G | ICM-20100 |
EN
