SIMATIC NET CP 1430 TF Basic Communications Processor
| Minimum Order Quantity | 1 Piece |
| Price | Contact for Jim |
| Packaging Details | Original new Factory Sealed |
| Delivery Time | 3–7 Days |
| Payment Terms | T/T |
| Shipping Method | DHL / FedEx / UPS / TNT |
| Supply Ability | Brand new, In Stock |
| Model Number | 6GK1143-0TA02 |
| Network | SINEC H1 / H1FO Industrial Ethernet |
| Processor | 80386 SX, 20 MHz |
| Ethernet controller | 82596 SX, 20 MHz |
| Ethernet serial interface | 82503 |
| AUI transmission rate | 10 Mbit/s |
| TP transmission rate | 10 Mbit/s |
| AS511 TTY rate | 9,600 bit/s |
| 5 V supply tolerance | ±5% |
| 24 V supply tolerance | +25% / -15% |
| Maximum 5 V current | 2.7 A at specified transceiver load |
| Maximum 24 V current | 70 mA |
| Battery-backup current | 20 µA typical; 110 µA maximum |
| Rated transceiver load used for current data | 0.5 A |
| Backplane connection | ES902, two 48-pin row-2 connectors |
| PG connector | 15-pin D-sub with securing screws |
| AUI / TP connector | 15-pin D-sub with securing slide |
| Ingress protection | IP00 |
| Operating temperature | 0–60 °C, without fan |
| Storage and transport temperature | -40 to +70 °C |
| Humidity at 25 °C | 95%, noncondensing |
| Maximum operating altitude | 3,000 m |
| Configuration environment | NCM COM 1430 TF on S5-DOS/ST V6.x |
| PG adapter support | 6ES5 734-1BD20 for 0TA02 |
| EMC emission standard | EN 50081-2:1993 |
| Industrial EMC immunity | EN 50082-2:1995 |
| Sales | Phone/Whatsapp | |
|---|---|---|
| Jim Pei | [email protected] | +86 18020776782 |
Siemens 6GK1143-0TA02 is the SIMATIC NET CP 1430 TF Basic communications processor. It provides the CP communication path between a supported SIMATIC S5 installation and the SINEC H1 industrial network. The module incorporates its own processor and Ethernet controller. Its front connectors provide the programming and network interfaces described for the CP hardware. NCM COM 1430 TF supplies the configuration and test environment.
The 6GK1143-0TA02 is intended for maintaining an existing CP 1430 TF Basic installation. The loaded connection database and PLC synchronization sequence are important to its communication behavior. Hardware-interface and software compatibility should be preserved during replacement. A commissioning plan should retain the original configuration and job assignments. This communications processor is distinct from the Extended CP 1430 TF variant.
Connect the supported SIMATIC S5 installation to its configured SINEC H1 communication network.
Handle the communication jobs defined in the CP connection database and synchronized by the PLC.
Use the supported PG connection and NCM COM environment for configuration, startup and communication testing.
No. This order number identifies the Basic variant; confirm the required variant before substitution.
CP data traffic remains disabled until the required PLC synchronization has completed.
A mode change can clear and re-establish connections and lose buffered data, so plan the restart sequence.
Retain the CP connection database, interface numbers and PLC communication job assignments.
The product information includes 0TA02 among the variants supporting the specified 6ES5 734-1BD20 adapter cable.
No. Check the exact processor variant, configuration conversion requirements and installed communication hardware.
With 20+ years of industry experience, we serve customers worldwide and have built long-term relationships across the UK, Russia, UAE, India, Venezuela, and more.
Our experienced team provides reliable pre-sales and after-sales support, helping customers select suitable products and resolve purchasing concerns.
We supply leading automation brands covering PLCs, DCS, I/O modules, drives, motors, power supplies, communication modules, and more.
A wide range of products is available from stock, including discontinued, obsolete, and hard-to-find parts, helping reduce sourcing time.
We value long-term cooperation and treat every customer with honesty, respect, responsibility, and care.
From a single replacement part to complete automation projects, we are ready to support your needs and build a long-term partnership.
Most products are covered by a warranty of up to 12 months, subject to the applicable terms and conditions. If any product-related issue occurs during the warranty period, our team will assist you and provide an appropriate solution.
Relevant datasheets and technical literature can be provided with the goods, offering useful information for product identification, installation, operation, and maintenance.
We understand the importance of minimizing equipment downtime. Our team responds promptly to inquiries and provides professional assistance with product information, quotations, order status, shipping, and after-sales questions.
We serve customers worldwide and provide reliable assistance from inquiry to delivery and after-sales service, ensuring clear and timely communication throughout the process.
We continue to source discontinued, obsolete, and hard-to-find automation parts from various brands, helping customers maintain existing equipment and reduce downtime caused by spare parts shortages.
| QTS00-008 | MX-FP02S | JRBS-57-8 |
| AKM115SF132 | RHT-WM-485-LCD | LNL-2220 |
| EXD5314CE | MIC-1000 | W28102J022A |
| CAN-5902 | DAD4-CBL-OBD-01 | ID11C00TCA300 |
| PCD7.D230 | XEV22D-1P2CO | ZE544-001A-210 |
| LF1B-NC3P-2THWW2-1M | PCO3000AS0 | MODG2-12LC-SM-PT |
| FMZ5000 | CMD5B2000 | KN703-C |
| A160048-00 | PCO5000000AS0 | ILAN485 |
| KP551 | PCS090 | TPNN0077 |
| SPAC-H450-W-US | PC03000AM0 | SD55X |
| GD250W4N | BMTI5 | E9733CB-00 |
| LNL-1100 | SMT-CD-R20 | BT-0D-HL-1 |
| CT7126 | MCI-211G | ICM-20100 |
EN
