Omnia producta

Siemens 6GK5206-2GS00-2AC2 SCALANCE XC206-2SFP G Managed Switch

Siemens 6GK5206-2GS00-2AC2 SCALANCE XC206-2SFP G Managed Switch

Nomen producti: SCALANCE XC206-2SFP G Managed Switch

Nomen Marcae: Siemens

Numerus Modeli: 6GK5206-2GS00-2AC2

Locus Originis: Germania

Garantia: 12 Mensis

Whatsapp: +86 18020776782

Inscriptio electronica: [email protected]

Appurtenance:

Conspectus
Network Fit
DESCRIPTIO
Diagnosis
Specificationes
Commercial Term
INFORMATIO CONTACTUS
Quaestiones Frequentes
Other Products
Producta commendata

Gigabit managed Layer 2 switch with six RJ45 ports and two SFP uplinks

The Siemens SCALANCE XC206-2SFP G combines six 10/100/1000 Mbit/s RJ45 ports with two 1000 Mbit/s SFP slots, redundant 24 V DC power, PROFINET IO and EtherNet/IP integration, managed redundancy and IEEE 1588v2 PTP.

Before you order: Confirm the exact article number, installed SFP types, fiber medium, port map, PROFINET device identity, IP settings, VLAN and redundancy configuration, C-PLUG state and both 24 V feeds before replacement.

Network Fit

Match the installed media, device identity and managed feature set before treating the switch as a like-for-like spare.

SFP path

Registra ĉiun artikolon de SFP, ondolongon, fibro-tipon, partneran pordon kaj ligilan distancon; sola fendo de SFP ne garantias optikan kompatiblon.

Identità del dispositivo

Faru sekurkopion de la nomo PROFINET, IP-adreso, VLAN-oj, pordaj roloj, redundecaj agordoj kaj administracia aliro antaŭ forigo.

Tempiga rolo

Dokumentu ajnan funkcion IEEE 1588v2 PTP kaj konfirmu ke la anstataŭaĵo realiĝas al la sama tempiga domajno post enservigo.

DESCRIPTIO

6GK5206-2GS00-2AC2 estas kompakta regata ŝaltilo SCALANCE XC por industria skatolo kaj distribuita reto. Siemens specifas montadon sur DIN-skalo, S7-skalon kaj muron, funkciadpli da -40 ĝis +70 °C kaj produktan platformon certigitan laŭ IEC 62443-4-2.

Sukcesa anstataŭigo postulas ne nur la reton konfiguron sed ankaŭ kompatiblan hardvaron. Eksportu la regatajn agordojn, etikedu ĉiujn ok datenligilojn, registru informojn pri SFP kaj partnera pordo, kaj verigu la konfiguritajn rolojn PROFINET, redundeco kaj tempigo antaŭ movado de iu ajn kablo.

Diagnosis

Use port status and managed diagnostics to separate fiber, partner-device and configuration faults from switch hardware faults.

Optical link

Verify approved SFPs, clean fiber ends, correct transmit-to-receive routing and compatible partner settings before replacing the switch.

Via electrica

Measure both 24 V inputs at the terminal under load and confirm that a single-feed test does not restart the switch.

Recovery test

During an approved window, interrupt one redundant path and confirm the expected RSTP or ring-recovery behavior and alarm reporting.

Specificationes

Designatio generis producti	SCALANCE XC206-2SFP G
Numerus ordinis	6GK5206-2GS00-2AC2
Copper interfaces	6 x RJ45, 10/100/1000 Mbit/s
Pluggable optical interfaces	2 x SFP, 1000 Mbit/s
Protocola Industrialia	PROFINET IO et EtherNet/IP
Synchronizatio Temporis	IEEE 1588v2 PTP
Storatio Configurationis	Fissura C-PLUG
Supple voltage	24 V DC; 19,2 ad 28,8 V
Ingressus electricitatis redundans	Supportata
Temperatura operativa	-40 ad +70 gradus C
Gradus praesidium	IP20
Dimensiones et Pondera	60 x 147 x 125 mm ; 0,52 kg

Commercial Term

Praeoffertio

Pretium praesens et disponibilitas

Solutio

T/T aut condicionibus conventis

Tempus praecedens

Confirmatum cum citatione

Navigatio

DHL, FedEx, UPS aut oneribus conventis

Garantia

12 Mensis

INFORMATIO CONTACTUS

Contactus

Iimus Pei

[email protected]

+86 180 2077 6782

Quaestiones Frequentes

Le 6GK5206-2GS00-2AC2 peut-il utiliser n’importe quel SFP à 1 Gbit/s inséré dans ses deux fentes de liaison montante ?

Non. Associez l’article SFP pris en charge par Siemens, la longueur d’onde optique, le type de fibre, le connecteur, la distance de liaison et l’interface du partenaire. Un transcepteur non pris en charge ou mal apparié peut rester inactif même s’il s’insère correctement sur le plan mécanique.

Pourquoi les ports RJ45 du 6GK5206-2GS00-2AC2 transmettent-ils du trafic tandis que le contrôleur PROFINET signale toujours un dispositif manquant ?

Le transfert Ethernet normal ne prouve pas que l’identité PROFINET est correcte. Attribuez le nom de dispositif enregistré et les paramètres IP, vérifiez le projet du contrôleur et la topologie des ports, puis lisez les diagnostics du commutateur et du contrôleur avant de modifier le projet.

Que dois-je vérifier lorsque l’une des liaisons SFP du 6GK5206-2GS00-2AC2 reste inactive après remplacement ?

Confirm the exact SFP at both ends, clean and reseat the fiber, verify transmit-to-receive orientation and compare the local and partner port states. A one-way optical path or wrong wavelength should be isolated before any VLAN or redundancy setting is changed.

How should the C-PLUG be handled when replacing 6GK5206-2GS00-2AC2?

Export the configuration and record the installed C-PLUG status before power-down. Transfer it only under the approved Siemens procedure and with compatible target hardware and firmware, then verify device identity, port settings and redundancy instead of assuming every value was restored.

Why can 6GK5206-2GS00-2AC2 lose both network and PTP synchronization after only one uplink is moved?

The moved cable may carry both production traffic and the timing path. Compare the saved port map, VLAN membership and PTP role, then verify that every intervening device and port supports the required IEEE 1588v2 profile.

Quid probat quod superfluum potentiae bene operatur in 6GK5206-2GS00-2AC2?

Mensurae singulae alimentationes 24 V ad interruptorem sub onere, verificatio polaritatis et condicionis terminalis, deinde removenda est una ex approbatis alimentationibus per tempus maintenance. Interruptor debet manere online et spemtum allarmum potentiae visibile esse debet.

Other Products

XF830A	SDI-OE-S	NA200T IZMX-RP16A-200
LFI520	4100LR12	SC200-00
SCD2200-RTU PS-22	IC200MDD844F	IC200MDL650L
ABB 1SDH001000R0505-B0821	BS6151 01 SP01	ZBRN2
FGR-002	AMAX-2241	8530D-I
THS710	105S-1	SC42-EP08
AMAX-2241/PMA	ADAP-KOOL	eWONx005CD
CH-LMD1	SP-0108-H2	ABB 2CDG110137R0011
IMD-IM20 / IM20DEMO	Abb 3BSE038226R1	SWH-4200
ABE7 P16T334	81672-01	LP/ 557-180-203