Industrial LTE router for secure remote access to Ethernet automation networks in North American mobile networks
The SCALANCE M876-4 LTE 4G NAM combines a four-port Fast Ethernet switch with LTE communication, VPN, firewall and NAT functions. Two SMA antenna connections support MIMO, while a digital input and output can integrate router status and remote-control functions with the machine.
Regional LTE check: Confirm North American carrier and band support, SIM provisioning, antenna type and location, APN, VPN and firewall rules, Ethernet addressing, power, digital I/O and firmware before installing or replacing the router.
LTE Integration
6GK5876-4AA00-2DA2 is the North American SCALANCE M876-4 cellular router variant. It provides four 10/100 Mbit/s RJ45 ports and LTE data rates up to 100 Mbit/s downlink and 50 Mbit/s uplink under suitable network conditions.
Reliability of remote access depends on the complete communication chain. The SIM and APN, LTE signal quality, paired antennas, carrier policy, VPN credentials, firewall rules, routing and NAT configuration must be backed up and verified before field replacement.
Carrier compatibility, antennas, and SIM settings must be confirmed as one integrated system before remote access is commissioned.
Carrier and SIM
Verify the North American carrier, LTE service, SIM PIN policy, APN, authentication method, and whether the account permits the required inbound or outbound traffic.
MIMO antennas
Use two suitable LTE antennas; inspect both SMA connections and place antennas where signal quality can be measured without cabinet shielding.
Signal baseline
Record signal values and connection stability during normal production so that later performance complaints can be compared against a known-good condition.
Directio Secura
Preserve security and routing data before replacement, then restore access in controlled stages.
Reservatio configurationis
Exporta configurationem routeris et annota firmware, usores, certificata, socios VPN, regulas muris ignis, introitus NAT et vias.
Validatio per gradus
Primum institue registrationem mobilis, deinde examina directionem, VPN et traffico servitii permisi separatim antequam latioris accessus remoti activetur.
Ingressus et Egressus Digitalis
Documenta propositum, rationem et connexionem intrantium et extrantium ut allarmae vel functiones controlis remoti non invertantur post servicium.
Specificationes
Designatio generis producti
SCALANCE M876-4 LTE 4G NAM
Numerus ordinis
6GK5876-4AA00-2DA2
Regional version
Retia mobilia Americae Septentrionalis
Aer interfaces
4 × RJ45 10/100 Mbit/s
LTE Data Velocitas
Usque ad 100 Mbit/s in descendendo / 50 Mbit/s in ascendendo
How can a project engineer confirm that 6GK5876-4AA00-2DA2 is compatible with the intended cellular service?
Treat it as the North American LTE version and verify the carrier, supported service and SIM plan before procurement. Confirm the APN, authentication method and whether the carrier permits the VPN and remote-access topology required by the project.
Q2
What should be backed up before replacing an operating 6GK5876-4AA00-2DA2?
Export the complete configuration and record firmware, SIM and APN settings, routes, NAT, firewall and VPN data, certificates and user accounts. Also label the four Ethernet links, both antennas, supply and digital I/O wiring.
Q3
Why can 6GK5876-4AA00-2DA2 register on LTE but still fail to establish the plant VPN?
Successful LTE registration only proves mobile connectivity. Check time and certificate validity, peer address, credentials, tunnel parameters, routes, firewall rules and carrier NAT restrictions, then compare logs at both VPN endpoints.
Q4
How should technicians diagnose unstable remote access through 6GK5876-4AA00-2DA2?
Inspect both SMA connections and antenna cables, compare signal values with the commissioning baseline and test antenna placement outside cabinet shielding. Also review supply stability, temperature, carrier events and whether the problem follows a particular antenna or SIM.
Q5
What installation precautions matter for 6GK5876-4AA00-2DA2 in a warm control cabinet?
Maintain the specified orientation and lateral clearance, keep ventilation paths open and measure cabinet temperature near the router. Operation above the standard temperature range requires the manual conditions for airflow and LTE-only use to be satisfied.
Q6
Quomodo comportamentum digitalis intrantis aut egredientis post curam 6GK5876-4AA00-2DA2 verificari potest?
Usurpa registrum connexionis ad confirmandum attributionem terminalis, polaritatem logicam et functionem eventus vel controlis configuratam. Proba intrantem ex circuitu campo et egredientem ad dispositivum recipiens antequam in eo fidatur pro servitio allarmi vel controllo remoto.
EN
