Pagina prima>Producta>SIEMENS>SINAMICS
| VENDITE | Epistula electronica | Telephus WhatsApp |
| Iimus Pei | [email protected] | +86 18020776782 |
| Numerus Exemplaris | 6SL3040-1LA01-0AA0 |
| Ingressus Digitales | 11 |
| Tensio Ingressus Digitalis | -3–30 V |
| Ingressus Digitalis Nivelis Infimus | -3–5 V |
| Ingressus Digitalis Nivelis Summus | 15–30 V |
| Typical Input Current at 24 V | 3.5 mA |
| Typical DI Rising Delay | 50 µs |
| Typical DI Falling Delay | 150 µs |
| Input/Output Digitalis Bidirectionale | 8 |
| Bidirectional Input Rising Delay | 5 µs |
| Bidirectional Input Falling Delay | 50 µs |
| Tensio Exitus Digitalis | 24 V DC |
| Maximum Load per Digital Output | 500 ma |
| Typical/Maximum Output Rising Delay | 150 / 400 µs |
| Typical/Maximum Output Falling Delay | 75 / 100 µs |
| INPUTUS ANALOGI | 1, switchable voltage/current |
| Analog Voltage Range | -10–10 V |
| Resolutio Tensionis | 12 bit plus signum |
| Résistance d'entrée en tension | Greater than 100 kΩ |
| Analog Current Range | -20–20 mA |
| Resolutio Tensionis | 11 bit plus signum |
| Résistance d'entrée en courant | Greater than 250 Ω |
| Alimentatio Electronica | 24 V DC, 20.4–28.8 V |
| Maxima Currus Electronica | 0.8 A, praeter onera coniuncta |
| Maxima Pēnsum Perditiōnis | 20 W |
| Maxima protectio | 20 A |
| Maxima currentis suppletoriae encoderis 24 V | 0.35 A |
| Maxima Frequencia Encoderis | 300 kHz |
| Velocitas transmittendi SSI | 100–1 000 kBaud |
| Resolutio positionis absolutae SSI | 30 bit |
| Maxima longitudo catenae encoderis TTL | 100 m, contorta et scutata |
| Maxima longitudo catenae encoderis HTL bipolaris | 300 m |
| Temperatura operativa | 0–55 °C |
| Coniunctiones PROFINET | 2 |
| Connesiones DRIVE-CLiQ | 1 |
| Minimum quantitas ordinis | 1 piece |
| Pretium | Contactus pro Jim |
| Singula Packaging | Novus Originalis, Sigillatus a Fabrica |
| Tempus Traditionis | 3–7 dies |
| Condiciones solutionis | T/T |
| Shipping modum | DHL / FedEx / UPS / TNT |
| Capacitas Supplicandi | In stoce |
Siemens 6SL3040-1LA01-0AA0 est unitas controlis SINAMICS CU310-2 PN cum interfacie PROFINET. Providet electronica controlis impulsum et coniunctiones localis signorum in configuratione SINAMICS compatibili. Signa digitalia et analogica possunt in operam impulsum configuratam incorporari. Evaluatio encoderis praebet integrationem retroactionis pro typis encoderum suffultis. Unitas ad hardware potentiae, firmawarum et projectum applicationis aptanda est. Cardina CompactFlash non includitur in configuratione ordinandi catalogi et separatim consideranda est.
Provides the control electronics for a compatible SINAMICS drive arrangement.
Connects the configured drive to the automation network through the PN interface.
Accepts the supported encoder feedback types for the engineered drive function.
Uses configurable digital I/O and a switchable analog input for drive-related signals.
Communicates with the supported connected drive hardware through DRIVE-CLiQ.
Uses the required flash-card configuration separately from the hardware ordering item.
The catalog configuration lacks a CompactFlash card. Confirm the required firmware, project, and licenses separately.
Use the exact CU310-2 PN article identity and verify its supported system application; do not select a unit based solely on a series heading.
No. Verify the specified TTL/HTL or SSI feedback format and its signal requirements against the project.
Provide detailed interface photographs and all available inspection information for the offered control unit.
Jim can arrange immediate dispatch after payment, once hardware and shipping requirements are confirmed.
Provide firmware, power-module identification and flash-card details so the control-unit match can be reviewed.
Plurima producta sub iure garantiae usque ad 12 menses cadunt, secundum condiciones et clausulas applicabiles. Si quodcumque problema cum producto durante periodum garantiae accidat, nostrum turma tibi adiuvabit et solutionem idoneam praebet.
Tabulae technicae pertinentes et litteratura technica una cum mercibus praebiri possunt, ut informationes utiles pro identificatione producti, installatione, operatione et manutentione offerantur.
Nos cognoscimus momenti magnitudinem ut tempus in quo machinae non operantur minuatur. Noster grex celeriter respondet ad quaestiones et praebet auxilium peritum de informationibus de productis, pretiis, statu ordinum, expeditione et quaestionibus post venditionem.
Nos servimus clientes per totum orbem et praebemus auxilium fidele ab initio quaestionis usque ad expeditionem et post venditionem, certificantes communicationem claram et tempestivam per totum processum.
Nos continuo quaerimus partes automationis quae desierunt produci, obsoletae sunt aut invenire difficile est ex variis brandis, adiuvantes clientes ut machinas iam existentes conservent et tempus in quo non operantur minuant propter defectum partium de reposito.
|
DIN-8SW8-I
|
LNL-C65-MW-K
|
YPCB2202 L1001
|
|
DI-5-1
|
IDS850 NG851
|
FG5448
|
|
MN-S3-500
|
BC9100
|
GE 3000
|
|
GHQ6310035R0111
|
DS7708-SR00004ZCWW
|
SPB-00154
|
|
FCM-240V
|
PCO3000AM0
|
AC2411
|
|
AC2458
|
251204-AN
|
SHO100-T
|
|
EXP-1048
|
PTXE6A-M
|
D320Dom1600R
|
|
4906GY
|
200RB6S5M
|
CLV422-0010
|
|
AVP101
|
TSXSCY21601
|
YPCB2209 CF2000
|
|
RM8I
|
IR425 / ir425-D4-2
|
RH 53A
|
|
SNB-5003P
|
301ST
|
GE UR6CH
|
|
JL325A
|
RC87618222
|
KN703-C
|
|
TM118 099-1003-07
|
HC-6000-EN-PB
|
PWR-125W-AC 341-0502-01
|
EN
