| Sales | Phone/Whatsapp | |
| Jim Pei | [email protected] | +86 18020776782 |
| Model Number | 6SL3040-1LA01-0AA0 |
| Digital Inputs | 11 |
| Digital Input Voltage | -3–30 V |
| Digital Input Low Level | -3–5 V |
| Digital Input High Level | 15–30 V |
| Typical Input Current at 24 V | 3.5 mA |
| Typical DI Rising Delay | 50 µs |
| Typical DI Falling Delay | 150 µs |
| Bidirectional Digital I/O | 8 |
| Bidirectional Input Rising Delay | 5 µs |
| Bidirectional Input Falling Delay | 50 µs |
| Digital Output Voltage | 24 V DC |
| Maximum Load per Digital Output | 500 mA |
| Typical/Maximum Output Rising Delay | 150 / 400 µs |
| Typical/Maximum Output Falling Delay | 75 / 100 µs |
| Analog Inputs | 1, switchable voltage/current |
| Analog Voltage Range | -10–10 V |
| Voltage Resolution | 12 bit plus sign |
| Voltage Input Resistance | Greater than 100 kΩ |
| Analog Current Range | -20–20 mA |
| Current Resolution | 11 bit plus sign |
| Current Input Resistance | Greater than 250 Ω |
| Electronics Supply | 24 V DC, 20.4–28.8 V |
| Maximum Electronics Current | 0.8 A, excluding connected loads |
| Maximum Power Loss | 20 W |
| Maximum Protection | 20 A |
| Maximum 24 V Encoder Supply Current | 0.35 A |
| Maximum Encoder Frequency | 300 kHz |
| SSI Baud Rate | 100–1,000 kBaud |
| SSI Absolute Position Resolution | 30 bit |
| Maximum TTL Encoder Cable | 100 m, twisted and shielded |
| Maximum Bipolar HTL Encoder Cable | 300 m |
| Operating Temperature | 0–55 °C |
| PROFINET Connections | 2 |
| DRIVE-CLiQ Connections | 1 |
| Minimum Order Quantity | 1 Piece |
| Price | Contact for Jim |
| Packaging Details | Original new Factory Sealed |
| Delivery Time | 3–7 Days |
| Payment Terms | T/T |
| Shipping Method | DHL / FedEx / UPS / TNT |
| Supply Ability | In stock |
Siemens 6SL3040-1LA01-0AA0 is the SINAMICS CU310-2 PN control unit with a PROFINET interface. It provides the drive-control electronics and local signal connections used in the compatible SINAMICS configuration. Digital and analog signals can be incorporated into the configured drive task. Encoder evaluation provides feedback integration for supported encoder types. The unit must be matched to the power hardware, firmware and application project. A CompactFlash card is not included in the catalog ordering configuration and must be considered separately.
Provides the control electronics for a compatible SINAMICS drive arrangement.
Connects the configured drive to the automation network through the PN interface.
Accepts the supported encoder feedback types for the engineered drive function.
Uses configurable digital I/O and a switchable analog input for drive-related signals.
Communicates with the supported connected drive hardware through DRIVE-CLiQ.
Uses the required flash-card configuration separately from the hardware ordering item.
The catalog configuration is without CompactFlash card. Confirm the required firmware, project and licenses separately.
Use the exact CU310-2 PN article identity and check its supported system application; do not select a unit solely by a series heading.
No. Confirm the specified TTL/HTL or SSI feedback format and its signal requirements against the project.
Request detailed interface photographs and available inspection information for the offered control unit.
Jim can arrange dispatch immediately after payment once the hardware and shipping requirements are confirmed.
Provide firmware, power-module identification and flash-card details so the control-unit match can be reviewed.
Most products are covered by a warranty of up to 12 months, subject to the applicable terms and conditions. If any product-related issue occurs during the warranty period, our team will assist you and provide an appropriate solution.
Relevant datasheets and technical literature can be provided with the goods, offering useful information for product identification, installation, operation, and maintenance.
We understand the importance of minimizing equipment downtime. Our team responds promptly to inquiries and provides professional assistance with product information, quotations, order status, shipping, and after-sales questions.
We serve customers worldwide and provide reliable assistance from inquiry to delivery and after-sales service, ensuring clear and timely communication throughout the process.
We continue to source discontinued, obsolete, and hard-to-find automation parts from various brands, helping customers maintain existing equipment and reduce downtime caused by spare parts shortages.
|
DIN-8SW8-I
|
LNL-C65-MW-K
|
YPCB2202 L1001
|
|
DI-5-1
|
IDS850 NG851
|
FG5448
|
|
MN-S3-500
|
BC9100
|
GE 3000
|
|
GHQ6310035R0111
|
DS7708-SR00004ZCWW
|
SPB-00154
|
|
FCM-240V
|
PCO3000AM0
|
AC2411
|
|
AC2458
|
251204-AN
|
SHO100-T
|
|
EXP-1048
|
PTXE6A-M
|
D320Dom1600R
|
|
4906GY
|
200RB6S5M
|
CLV422-0010
|
|
AVP101
|
TSXSCY21601
|
YPCB2209 CF2000
|
|
RM8I
|
IR425 / ir425-D4-2
|
RH 53A
|
|
SNB-5003P
|
301ST
|
GE UR6CH
|
|
JL325A
|
RC87618222
|
KN703-C
|
|
TM118 099-1003-07
|
HC-6000-EN-PB
|
PWR-125W-AC 341-0502-01
|
EN
