Omnia producta

Siemens SIMATIC NET 6GK1901-1BB10-2AA0 IE FC RJ45 Plug 180 2x2

Siemens SIMATIC NET 6GK1901-1BB10-2AA0 IE FC RJ45 Plug 180 2x2

SIEMENS | SIMATIC NET

6GK1901-1BB10-2AA0

Industrial Ethernet FastConnect RJ45 conector 180 (2x2), 10/100 Mbit/s, cum robusta capsula metallica et foramine egressus cavi 180 graduum.

Tempus ducens: In stoce

Garantia: unum annum

Inquisitio per epistulam electronicam [email protected]

WhatsApp +86 18159889985

Appurtenance:

Conspectus
Data Technica
Inquisitio
Proprietates
Interfacies
Installatio
Environment
Quaestiones Frequentes
Modellos Recommandatos
Producta commendata

Siemens SIMATIC NET IE FC RJ45 Plug 180 (2x2)

Exact configured model: 6GK1901-1BB10-2AA0

OFFICIAL PRODUCT IDENTITY

Industrial Ethernet FastConnect RJ45 plug 180 2x2 for IE FC TP cable 2x2. The official configuration uses a rugged metal enclosure, FC connection system, and one RJ45 network connection.

Configured geometry

13.7 mm width, 16 mm height, and 55 mm depth; 180-degree cable outlet; 6.5 mm connectable cable diameter.

Connection package

Four IE FC TP cable contacts and one RJ45 network/device connection; integrated cut-and-clamp contacts for four-wire AWG22 TP FC installation cable.

Installation focus

Terminate the specified four-wire IE FC TP installation cable with the FastConnect system, keep the straight 180-degree outlet orientation, and verify the RJ45 latch and metal strain relief before commissioning.

Examinatio Emptionis

Match every segment of 6GK1901-1BB10-2AA0. Confirm the 1-unit pack, IE FC RJ45 Plug 180 (2x2) designation, metal enclosure, 180-degree outlet, and exact suffix 2AA0 against the label and Siemens data sheet.

Data Technica

Configuratio et specificatio officialis

Modello completo	6GK1901-1BB10-2AA0
Familia producti	SIEMENS SIMATIC NET
Typus Producti	IE FC RJ45 Plug 180 (2×2)
Official Description	Industrial Ethernet FastConnect RJ45 plug 180 2x2 pro IE FC TP cable 2x2; robust metal housing; FC connection system; 1 pack = 1 unit
Transfer Rate	10/100 Mbit/s
Interfacies cabilorum	4 pro IE FC TP cables
Network/device interface	1 x RJ45
Cable-side contact	Integrated cut-and-clamp contacts pro 4-wire TP FC installation cable, AWG22
FastConnect	Ita
Egressus Cavis	180 Graduum
Theca	Metal
Dimensiones	13.7 x 16 x 55 mm (W x H x D)
Pondus	35 g
Diametro del cavo collegabile	6,5 mm
Sectio Transversa Conductoris	0,33 mm²
Permitted reuses	10
Potestas Per Ethernet	PoE: Yes; PoE+: Yes
Aestimatio Protectionis	IP20
Temperatura operativa	−40 ad +85 °C
Temperatura servandae	−40 ad +85 °C
Trānsportus temperatūra	−40 ad +85 °C
Humiditas relativa	Up to 95% at 25 °C, noncondensing
Test voltage	500 V AC core-to-core; 1500 V AC core-to-shield
Cabling standard	Categoria 5
Approvals and conformity	RoHS, UL and cULus; not approved for railway applications to EN 50155
Air pollutant resistance	ANSI/ISA-71.04 severity level G3
Official Document	Siemens data sheet 6GK1901-1BB10-2AA0, pages 1-3; last modified 2026-04-28

Inquisitio

Contactus

Stella

Inquisitio per epistulam electronicam [email protected]

WhatsApp +86 18159889985

Proprietates

FastConnect termination

The integrated cut-and-clamp contacts terminate four-wire TP FC installation cable without a separate conventional insulation-stripping workflow.

Rugged enclosure

The metal enclosure protects the connector body and supports industrial handling while the integrated strain relief secures the cable.

Iter directum cabilorum

The 180-degree outlet keeps the cable aligned with the plug axis for installations where a straight exit is required.

Interfacies

Connection Arrangement

Four contacts terminate the IE FC TP cable 2x2 and one RJ45 interface connects the network or terminal device.

FastConnect cable side

Integrated cut-and-clamp contacts accept the specified four-wire AWG22 TP FC installation cable with 0.33 mm² conductors and 6.5 mm cable diameter.

Link capability

The plug is specified for 10/100 Mbit/s Category 5 Industrial Ethernet and supports PoE and PoE+ applications.

Installatio

Praeparatio Cavi

Use IE FC TP cable 2x2 with 6.5 mm diameter, AWG22 conductors and 0.33 mm² conductor cross-section as stated in the Siemens data sheet.

Termination sequence

Prepare the cable with the compatible FastConnect tooling, place all four conductors in the cut-and-clamp contacts, close the connector and engage the strain relief.

Commissioning Check

Verify RJ45 latch engagement, continuity, cable retention and the intended 10/100 Mbit/s Ethernet link before returning the network to service.

Environment

Temperatura range

Operation, storage and transport are specified from -40 to +85 °C.

Protection and humidity

The connector is rated IP20 and up to 95% relative humidity at 25 °C without condensation; use an appropriate enclosure for harsher exposure.

Compliance context

The data sheet lists RoHS, UL and cULus and ANSI/ISA-71.04 G3 resistance; EN 50155 railway approval is not listed for this order number.

Quaestiones Frequentes

Q1. How can I verify that the quotation is for the exact 6GK1901-1BB10-2AA0 configuration?

Require the full order number on the Siemens label and confirm IE FC RJ45 Plug 180 (2x2), 10/100 Mbit/s, a 180-degree cable outlet and a 1-unit pack. The suffix 2AA0 must match the quotation and product label.

Q2. How can I distinguish a new connector from a used or refurbished unit?

Ask for current photos of the sealed packaging, label, RJ45 latch, metal enclosure and all cut-and-clamp contacts. A previously terminated unit may show conductor impressions, tool marks, latch wear or disturbed strain-relief parts.

Q3. Quomodo verificare possum an suppeditator legitimus et fidus sit?

Verifica registrationem societatis suppeditatoris, identitatem bancariam congruentem, informationes contactus commercialis investigabiles et citationem scriptam quae Siemens, 6GK1901-1BB10-2AA0 et exactam configurationem unius unitatis designat. Comparato item offertum cum officiali folio dati Siemens.

Q4. Quae specificatio technica ante emptionem verificanda sunt?

Confirma Ethernet 10/100 Mbit/s, cavo IE FC TP 2×2, conductores AWG22, sectio transversa 0,33 mm², diametrum cavi 6,5 mm, foramen ad angulum 180 graduum, Categoria 5, IP20, temperaturam a −40 usque ad +85 °C et eventuale requisitum PoE aut PoE+.

Q5. Quae argumenta materialia ante solutionem petenda sunt?

Petito photographemata data, quae integram titulam Siemens et numerum ordinis, pachetum non apertum, interfaciem RJ45, clanculum, quattuor contactus cavi, inclosurem metallicam et relaxationem tensionis ostendant. Haec argumenta ad citationem vel ordinem emptionis referri debent.

Q6. Num plug similis IE FC RJ45 aut suffigium diversum locum 6GK1901-1BB10-2AA0 substituere potest?

Non automatico. Un’uscita a 90 gradi, una quantità confezionata diversa o un altro suffisso possono modificare la geometria di installazione o la quantità fornita. Approvare un sostituto soltanto dopo aver verificato cavo, direzione dell’uscita, interfaccia, imballaggio e dati d’ordine.

Modellos Recommandatos

60 modelli automationis industrialis electi fortuito

PM554-TP-ETH	T8850C	TRICONEX 3623
MPC4 200-510-074-113	80026-044-02	2711R-T10T
3HAC029896-001	Siemens 6ES7522-1BH10-0AA0	8EI2X2HWD10.0600-1
1C31122G02/1C31125G2	T8451C	FCM2F4
5466-1045	RH916FN	DS200LDCCH1A
TDM4.1-020-300-W0	160-BA04NSF1	2715P-T10CD
CC-PAIL51	MPC4 200-510-076-114	KJ3241X1-EA1
5466-315	MVME167-032A	IC655MDL527
FC-UGAO01	IMDSO14	TRICONEX 8312
AI880A	3HAC058993-004	X20AI2622
CC-PCNT02	IC755CSS10CDA	ABB SD833
3HAC057544-006	ProSoft PLX51-DNPS	Yokogawa AAI543-S50/K4A00
T8461C	INIIT13	1769-L23E-QBFC1B
A 5X00419G02 Ethernet Link Controller	P0914TN	80190-100-01-R
2711P-T15C21D8S	22B-D4P0N104	5466-1141
IC695CPU315	SS4303T01	3HAC023020-003
HDS03.2-W100N-HS32-01-FW	CC-PUIO31	B 1C31181G02 Remote I/O Module
MVME61006E-0161	EJA110E-JMS4G-717EB/NF	CC-PDIH01
HCS01.1E-W0008-A-03-B-ET-EC-NN-L4-NN-FW	ProSoft MVI69E-MBS	X20SI4100
PM591-2ETH	DKC03.1-040-7-FW	KDA3.3-100-3-A00-W1