ALL PRODUCTS

Siemens SIMATIC NET 6GK1901-1BB10-2AA0 IE FC RJ45 Plug 180 2x2

Siemens SIMATIC NET 6GK1901-1BB10-2AA0 IE FC RJ45 Plug 180 2x2

SIEMENS | SIMATIC NET

6GK1901-1BB10-2AA0

Industrial Ethernet FastConnect RJ45 plug 180 (2x2), 10/100 Mbit/s, with rugged metal enclosure and a 180-degree cable outlet.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

siemens simatic net 6gk1901 1bb10 2aa0 ie fc rj45 plug 180 2x2-1

Overview
Technical Data
Inquiry
Features
Interfaces
Installation
Environment
FAQ
Recommend Models
Recommended Products

Siemens SIMATIC NET IE FC RJ45 Plug 180 (2x2)

Exact configured model: 6GK1901-1BB10-2AA0

Official product identity

Industrial Ethernet FastConnect RJ45 plug 180 2x2 for IE FC TP cable 2x2. The official configuration uses a rugged metal enclosure, FC connection system and one RJ45 network connection.

Configured geometry

13.7 mm width, 16 mm height and 55 mm depth; 180-degree cable outlet; 6.5 mm connectable cable diameter.

Connection package

Four IE FC TP cable contacts and one RJ45 network/device connection; integrated cut-and-clamp contacts for four-wire AWG22 TP FC installation cable.

Installation focus

Terminate the specified four-wire IE FC TP installation cable with the FastConnect system, keep the straight 180-degree outlet orientation, and verify the RJ45 latch and metal strain relief before commissioning.

Procurement check

Match every segment of 6GK1901-1BB10-2AA0. Confirm the 1-unit pack, IE FC RJ45 Plug 180 (2x2) designation, metal enclosure, 180-degree outlet, and exact suffix 2AA0 against the label and Siemens data sheet.

Technical Data

Official configuration and specifications

Complete model	6GK1901-1BB10-2AA0
Product family	Siemens SIMATIC NET
Product type	IE FC RJ45 Plug 180 (2x2)
Official description	Industrial Ethernet FastConnect RJ45 plug 180 2x2 for IE FC TP cable 2x2; rugged metal enclosure; FC connection system; 1 pack = 1 unit
Transfer rate	10/100 Mbit/s
Cable interfaces	4 for IE FC TP cables
Network/device interface	1 x RJ45
Cable-side contact	Integrated cut-and-clamp contacts for 4-wire TP FC installation cable, AWG22
FastConnect	Yes
Cable outlet	180 degrees
Enclosure	Metal
Dimensions	13.7 x 16 x 55 mm (W x H x D)
Weight	35 g
Connectable cable diameter	6.5 mm
Conductor cross-section	0.33 mm²
Permitted reuses	10
Power over Ethernet	PoE: Yes; PoE+: Yes
Protection rating	IP20
Operating temperature	-40 to +85 °C
Storage temperature	-40 to +85 °C
Transport temperature	-40 to +85 °C
Relative humidity	Up to 95% at 25 °C, noncondensing
Test voltage	500 V AC core-to-core; 1500 V AC core-to-shield
Cabling standard	Category 5
Approvals and conformity	RoHS, UL and cULus; not approved for railway applications to EN 50155
Air pollutant resistance	ANSI/ISA-71.04 severity level G3
Official document	Siemens data sheet 6GK1901-1BB10-2AA0, pages 1-3; last modified 2026-04-28

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Features

FastConnect termination

The integrated cut-and-clamp contacts terminate four-wire TP FC installation cable without a separate conventional insulation-stripping workflow.

Rugged enclosure

The metal enclosure protects the connector body and supports industrial handling while the integrated strain relief secures the cable.

Straight cable path

The 180-degree outlet keeps the cable aligned with the plug axis for installations where a straight exit is required.

Interfaces

Connection arrangement

Four contacts terminate the IE FC TP cable 2x2 and one RJ45 interface connects the network or terminal device.

FastConnect cable side

Integrated cut-and-clamp contacts accept the specified four-wire AWG22 TP FC installation cable with 0.33 mm² conductors and 6.5 mm cable diameter.

Link capability

The plug is specified for 10/100 Mbit/s Category 5 Industrial Ethernet and supports PoE and PoE+ applications.

Installation

Cable preparation

Use IE FC TP cable 2x2 with 6.5 mm diameter, AWG22 conductors and 0.33 mm² conductor cross-section as stated in the Siemens data sheet.

Termination sequence

Prepare the cable with the compatible FastConnect tooling, place all four conductors in the cut-and-clamp contacts, close the connector and engage the strain relief.

Commissioning check

Verify RJ45 latch engagement, continuity, cable retention and the intended 10/100 Mbit/s Ethernet link before returning the network to service.

Environment

Temperature range

Operation, storage and transport are specified from -40 to +85 °C.

Protection and humidity

The connector is rated IP20 and up to 95% relative humidity at 25 °C without condensation; use an appropriate enclosure for harsher exposure.

Compliance context

The data sheet lists RoHS, UL and cULus and ANSI/ISA-71.04 G3 resistance; EN 50155 railway approval is not listed for this order number.

FAQ

Q1. How can I verify that the quotation is for the exact 6GK1901-1BB10-2AA0 configuration?

Require the full order number on the Siemens label and confirm IE FC RJ45 Plug 180 (2x2), 10/100 Mbit/s, a 180-degree cable outlet and a 1-unit pack. The suffix 2AA0 must match the quotation and product label.

Q2. How can I distinguish a new connector from a used or refurbished unit?

Ask for current photos of the sealed packaging, label, RJ45 latch, metal enclosure and all cut-and-clamp contacts. A previously terminated unit may show conductor impressions, tool marks, latch wear or disturbed strain-relief parts.

Q3. How should I check whether the supplier is legitimate and reliable?

Verify the supplier company registration, consistent banking identity, traceable business contact information and a written quotation that identifies Siemens, 6GK1901-1BB10-2AA0 and the exact 1-unit configuration. Compare the offered item with the official Siemens data sheet.

Q4. Which engineering specifications should be checked before purchase?

Confirm 10/100 Mbit/s Ethernet, IE FC TP cable 2x2, AWG22 conductors, 0.33 mm² cross-section, 6.5 mm cable diameter, 180-degree outlet, Category 5, IP20, -40 to +85 °C and any PoE or PoE+ requirement.

Q5. What physical evidence should be requested before payment?

Request dated photos showing the complete Siemens label and order number, unopened package, RJ45 interface, latch, four cable contacts, metal enclosure and strain relief. The evidence should be tied to the quotation or purchase order.

Q6. Can a similar IE FC RJ45 plug or a different suffix replace 6GK1901-1BB10-2AA0?

Not automatically. A 90-degree outlet, a different pack quantity or another suffix can change installation geometry or supplied quantity. Approve a substitute only after the cable, outlet direction, interface, packaging and order data have been checked.

Recommend Models

60 randomly selected industrial automation models

PM554-TP-ETH	T8850C	TRICONEX 3623
MPC4 200-510-074-113	80026-044-02	2711R-T10T
3HAC029896-001	Siemens 6ES7522-1BH10-0AA0	8EI2X2HWD10.0600-1
1C31122G02/1C31125G2	T8451C	FCM2F4
5466-1045	RH916FN	DS200LDCCH1A
TDM4.1-020-300-W0	160-BA04NSF1	2715P-T10CD
CC-PAIL51	MPC4 200-510-076-114	KJ3241X1-EA1
5466-315	MVME167-032A	IC655MDL527
FC-UGAO01	IMDSO14	TRICONEX 8312
AI880A	3HAC058993-004	X20AI2622
CC-PCNT02	IC755CSS10CDA	ABB SD833
3HAC057544-006	ProSoft PLX51-DNPS	Yokogawa AAI543-S50/K4A00
T8461C	INIIT13	1769-L23E-QBFC1B
A 5X00419G02 Ethernet Link Controller	P0914TN	80190-100-01-R
2711P-T15C21D8S	22B-D4P0N104	5466-1141
IC695CPU315	SS4303T01	3HAC023020-003
HDS03.2-W100N-HS32-01-FW	CC-PUIO31	B 1C31181G02 Remote I/O Module
MVME61006E-0161	EJA110E-JMS4G-717EB/NF	CC-PDIH01
HCS01.1E-W0008-A-03-B-ET-EC-NN-L4-NN-FW	ProSoft MVI69E-MBS	X20SI4100
PM591-2ETH	DKC03.1-040-7-FW	KDA3.3-100-3-A00-W1