Fiber-optic PROFIBUS DP master interface for SIMATIC S7-400 central racks
The IM 467 FO links an S7-400 system to optical PROFIBUS DP through two 660 nm duplex fiber sockets. It is configured in STEP 7 and provides DP master communication plus programming-device and operator-control access over the bus.
Optical replacement check: Verify the complete FO order number, existing S7-400 rack and slot, STEP 7 project, optical transmitter and receiver routing, connector type, fiber condition, slave count, baud rate and normal INTF, EXTF, RUN and STOP indications before removal.
Optical Topology
6ES7467-5FJ00-0AB0 is the optical version of the SIMATIC S7-400 IM 467 PROFIBUS DP master interface. Unlike the electrical 6ES7467-5GJ02-0AB0, this model uses integrated fiber-optic connections and must be matched to the installed optical topology.
Exchānsgō cōntrollātus incipit cum cōnfigūrātiōne hardware STEP 7, rēgistrō rāctī et slotis, līstā DP servōrum et mappā transmitte-et-recepe ānnotātā.
Serva viam fibrālem physicam et stātiōnem DP logicam antequam interfāciēs perturbētur.
Mappa transmitte-et-recepe
Ānnotā utrāque directiō opticam, dispositīva socia, adaptātōrēs et viās cābōrum; vērificā orientātiōnem transmittere-ad-receptōrem ad utrāmque extremitātem.
Praeparātiō connēctōris
Inspecta qualitās polītiōnis, sectiō tunicāe, clausura adaptātōris et radius flexiōnis permissus, quia defectūs minūtī possunt gravem attemperātiōnem opticam generāre.
Rēgistrum prōiectūs DP
Exporta stātiōnem STEP 7, līstam servōrum, ādresse, velocitātem baud et tamquam buffer diagnōsticum simul cum photogrāphiīs normalibus LED.
IM Diagnostics
Ūtāre combinātiōne plēna LED et diagnōsticīs STEP 7 ad separanda fāulta interna, optica et servōrum.
Indicātiō INTF
Review module configuration, firmware state and internal diagnostics before assuming an external bus problem.
EXTF indication
Trace optical continuity and the first missing or faulty DP slave when RUN remains active with an external fault.
Compatibilitas Cum Armario
Keep within the S7-400 central-rack limits and do not combine this interface with a CP 443-5 Extended in the same supported configuration.
Specificationes
Designatio generis producti
SIMATIC S7-400 IM 467 FO
Numerus ordinis
6ES7467-5FJ00-0AB0
Principale Officium
PROFIBUS DP master interface
Longitudo Undae Opticae
660 nm
Interfacies opticae
2 duplex fiber-optic sockets
Transmissio rate
9.6 kbit/s to 12 Mbit/s; 3 and 6 Mbit/s unavailable
Quomodo verificare possum quod 6ES7467-5FJ00-0AB0 est versio FO requirita, non autem IM 467 electrica?
Inspicere totam etiquettam posteriorem et confirmare duos connexiones duplex opticas. Comparare introitum hardware STEP 7 et viam fibrosam installatam; IM 467 electrica utitur conectori PROFIBUS novem-pinis et non est substitutum aequivalens in connexionibus.
Q2
Quid annotandum est antequam 6ES7467-5FJ00-0AB0 in armario S7-400 substituitur?
Archivare projectum STEP 7 et tamponem diagnosticum, photographare armarium et loculum, notare velocitatem bus, adresses DP slave et statum normalem LED. Notare fibras emittentes et recipiendas, disposita socia, adaptatores et vias cavi antequam armarium exsuffletur.
Q3
Cur 6ES7467-5FJ00-0AB0 potest in RUN ingredi dum EXTF adhuc indicat defectum?
RUN confirmat statum operationis interfacii, dum EXTF potest indicare problematum lineae DP vel servi. Verifica continuitatem opticam et directionem, deinde utere diagnosticis magistri ad identificandum primum servum desideratum, modulum servi defectuosum, vel incoherentiam configurationis.
Q4
Quomodo connectores fibrae pro 6ES7467-5FJ00-0AB0 inspiciendi sunt durante installatione?
Inspece facies extremas fibrae plasticae pro politura levi et aequa, et confirma quod vagina non protrudit. Verifica fixationem adaptatoris, orientationem transmittentis supra recipiens, et radium curvaturae permisum antequam rete DP activetur.
Q5
Quae probatio commissionis maxime utilis est cum 6ES7467-5FJ00-0AB0 non restituit originale rete DP?
Praebere configurationem hardware STEP 7, parametres bus, listam servorum, schemata luminis LED INTF et EXTF, et photographias utriusque extremi optici. Includere quos servos desiderare et num defectus mutetur cum segmentum fibrae suspectum isolatur.
Q6
Potestne 6ES7467-5FJ00-0AB0 cum CP 443-5 Extended sine redactione installari?
Nulla directa combinatio supponenda est. Siemens affirmat familiam IM 467 et CP 443-5 Extended non posse simul in arrangemente supportata uti; ideo structura rack et rete ante quamlibet mixtam installationem recensenda est.
EN
