Omnia producta

Siemens 6SL3352-6TG41-3AA3 SINAMICS S Replacement Control Interface Board

Siemens 6SL3352-6TG41-3AA3 SINAMICS S Replacement Control Interface Board

Nomen producti: Tabula Interfaciei de Controllo Substitutionis SINAMICS S

Nomen Marcae: Siemens

Numerus Modeli: 6SL3352-6TG41-3AA3

Locus Originis: Germania

Garantia: 12 Mensis

Whatsapp: +86 18020776782

Inscriptio electronica: [email protected]

Appurtenance:

Conspectus
Retrofit Mapping
DESCRIPTIO
Collaudo
Specificationes
Commercial Term
INFORMATIO CONTACTUS
Quaestiones Frequentes
Other Products
Producta commendata

Replacement control interface board for a 500–690 V, 1270 A SINAMICS motor module

Siemens identifies 6SL3352-6TG41-3AA3 as a spare control interface board for a 500–690 V AC, 50/60 Hz, 1270 A motor module. The product is discontinued, and the official service mapping assigns a CIM and power-unit-dependent IPD card for migration.

Before you order: Confirm the exact 1270 A motor-module article, voltage class, cooling and power-unit version, board revision, connector map and Siemens service mapping before purchase or migration.

Retrofit Mapping

The old CIB is replaced as part of a coordinated CIM and IPD arrangement selected for the exact power unit.

CIB identity

Confirm the installed label is exactly 6SL3352-6TG41-3AA3 and record the board revision and motor-module nameplate.

CIM mapping

The official service table assigns CIM 6SL3350-6TK00-0EA0 for this old control electronic board.

IPD mapping

The same table assigns power-unit-dependent IPD card 6SL3352-3AG41-3AB0; verify the complete pair before ordering.

DESCRIPTIO

6SL3352-6TG41-3AA3 is an old control electronic board in the SINAMICS S chassis-drive family. The Siemens service document maps this CIB to CIM 6SL3350-6TK00-0EA0 and IPD card 6SL3352-3AG41-3AB0.

That mapping is not permission to change one board in isolation. Record the complete motor-module nameplate, installed CIB and adjacent power-unit hardware, then follow the Siemens retrofit procedure for the matched CIM and IPD combination.

Collaudo

High-power drive work requires safe isolation, controlled connector handling and a staged functional test.

Isolatio

Lock out the drive, verify the DC link is discharged and follow the Siemens chassis-drive service procedure and ESD precautions.

Registrum wiring

Photograph and label control, feedback and firing-related connections before removal; inspect connector condition and protective earth.

Testum Functionale

Review all drive diagnostics, verify the 1270 A motor-module identification and test the affected stage at an approved low-risk operating point.

Specificationes

Designatio generis producti	Tabula Interfaciei de Controllo Substitutionis SINAMICS S
Numerus ordinis	6SL3352-6TG41-3AA3
Installed section	Modulus Motoris
Classe Tensionis	500 ad 690 V AC
Frequentia Lineae	50/60 HZ
Classis Currentis	1270 A
Status cyclī vītae	Discontinued spare part
Published net weight	0.4 KG
Official replacement CIM	6SL3350-6TK00-0EA0
Official replacement IPD	6SL3352-3AG41-3AB0
Migration basis	Power-unit-dependent Siemens mapping
Service Requirement	Matched hardware, wiring and controlled test

Commercial Term

Praeoffertio

Pretium praesens et disponibilitas

Solutio

T/T aut condicionibus conventis

Tempus praecedens

Confirmatum cum citatione

Navigatio

DHL, FedEx, UPS aut oneribus conventis

Garantia

12 Mensis

INFORMATIO CONTACTUS

Contactus

Iimus Pei

[email protected]

+86 180 2077 6782

Quaestiones Frequentes

Can 6SL3352-6TG41-3AA3 be installed in any 500–690 V SINAMICS S motor module?

No. It is identified for the 1270 A motor-module class, and the power-unit version and board revision must match. Confirm the full motor-module nameplate and Siemens service mapping before ordering.

What official migration parts correspond to 6SL3352-6TG41-3AA3?

The Siemens service table maps the old CIB to CIM 6SL3350-6TK00-0EA0 and IPD card 6SL3352-3AG41-3AB0. Treat them as a matched retrofit set for the documented power unit, not as independent generic substitutes.

Why is replacing only 6SL3352-6TG41-3AA3 risky when the original board is discontinued?

The old CIB combines functions that Siemens later separates into a common CIM and a power-unit-dependent IPD card. Mixing an unmatched board, IPD or power unit can leave the drive uncommissionable or expose the power stage to incorrect control.

What must be recorded before removing 6SL3352-6TG41-3AA3 from a running drive?

Register the motor-module article, voltage and 1270 A class, CIB revision, adjacent power-unit hardware, connector locations, protective earth, cable routing and the complete drive configuration and alarm history.

What should be checked if the drive reports power-stage or feedback faults after 6SL3352-6TG41-3AA3 service?

Keep the drive isolated until the exact CIM/IPD mapping, connector seating, cable routing and protective-earth connections are confirmed. Compare the first diagnostic events with the pre-service record before attempting repeated resets.

How should 6SL3352-6TG41-3AA3 be functionally accepted after replacement or retrofit?

After safe isolation and installation checks, verify that the drive recognizes the matched hardware, review all active diagnostics and test enable, feedback and controlled motor response at an approved low-risk operating point before applying production load.

Other Products

LNL-MT11-485	ABB 1VCF339750R1912	VSRPT-IDOOR-72
6EP1332-4BA00	KJ3001X1-CA1	MT11
6010P	RPS1300 6GK6000-8HS01-0AA0	LBB1856/00 LBB1957/00
BE103194 A62-AC143	ULXS4 784-820MHz-R4	330930-045-02-00
SSB401-53	NPT-8R0-0108-1	033100-A
305228-PR	370710B-200	402712-PR
BA21747-040-00	SA6200A-201	750-841 3x750-432 3x 750-531 750-600
998-1105-016	9274CBTE-0010	DS10 LV CEAS410751-01-01 / HK50AA003
F9342LP-05	HMIDT551	MNL-13R MNL-13RF3
A5E00247018	SB401-13	42716625-V1