Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000
6es7540 1ab00 0aa0-0

SIMATIC S7 Series

Home >  Products >  SIEMENS >  SIMATIC S7 Series

Siemens SIMATIC S7-1500 6ES7540-1AB00-0AA0 CM PtP RS422/485 BA Communication Module | Original New

SIEMENS · SIMATIC S7-1500
6ES7540-1AB00-0AA0
CM PtP RS422/485 BA communication module
INTERFACE
RS422 / RS485
DATA RATE
Up to 19.2 kbps
LEAD TIME
In stock
WARRANTY
1 year

Appurtenance:
  • Overview
  • Technical Data
  • Inquiry
  • Applications
  • Functions
  • Diagnostics
  • Installation
  • FAQ
  • Recommend Models
  • Recommended Products
PRODUCT OVERVIEW
6ES7540-1AB00-0AA0
CM PtP RS422/485 BA communication module
Serial point-to-point link
The module adds one electrically isolated RS422 or RS485 interface to a SIMATIC S7-1500 station.
Protocol handling
Integrated Freeport and 3964(R) support allows configurable 7- or 8-bit frames, parity and one or two stop bits.
Buffered communication
A 2 kbyte frame buffer stores up to 255 telegrams, with diagnostic LEDs for RUN, ERROR, receive and transmit activity.

Technical Data

TECHNICAL DATA
6ES7540-1AB00-0AA0
CM PtP RS422/485 BA communication module
Complete model
6ES7540-1AB00-0AA0
Product family
SIMATIC S7-1500
Product type
CM PtP RS422/485 BA communication module
Dimensions
35 × 147 × 127 mm, W × H × D
Weight
Approx. 0.22 kg
Mounting
SIMATIC S7-1500 mounting rail
Supply source
System power supply through the backplane bus
Current consumption
Rated 33 mA from backplane bus
Backplane-bus power
0.65 W
Typical power loss
0.6 W
Address area
8 input bytes
Interfaces
One RS422 / RS485 interface
Maximum data rate
19.2 kbps for RS422 and RS485
Maximum cable length
1200 m for RS422 or RS485
RS422 connection
4-wire full duplex supported; 4-wire multipoint not supported
Integrated protocols
Freeport and 3964(R)
Maximum telegram length
1 kbyte
Character format
7 or 8 data bits; 1 or 2 stop bits
Parity
None, even, odd, always 1, always 0 or any
Frame buffer
2 kbyte; up to 255 telegrams
Diagnostics
Diagnostic interrupt and wire-break diagnostics; no hardware interrupt
Indicators
RUN green, ERROR red, RxD yellow and TxD yellow LEDs
Electrical isolation
Backplane bus isolated from interface; tested at 707 V DC
Operating temperature
Horizontal 0 to 60 °C; vertical 0 to 40 °C
Engineering software
TIA Portal V12.0; STEP 7 V5.5 SP2 or later with GSD
Distributed operation
Supported with SIMATIC S7-300, S7-400, S7-1500 and standard PROFINET controllers

Inquiry

CONTACT
STELLA
Direct product inquiry

Applications

APPLICATIONS
6ES7540-1AB00-0AA0
Official product-specific information
Legacy-device integration
Connect industrial instruments, scanners, drives or controllers that expose RS422 or RS485 serial interfaces.
Protocol adaptation
Use Freeport for application-defined telegrams or 3964(R) for the supported Siemens serial communication procedure.
Long serial links
The documented interface allows cable lengths up to 1200 m when installation and transmission-rate requirements are met.
Distributed automation
Operate the module with S7-1500 or supported distributed configurations under standard PROFINET controllers.

Functions

FUNCTIONS
6ES7540-1AB00-0AA0
Official product-specific information
Dual electrical standard
The single serial port can be configured for RS422 or RS485 hardware operation according to the connected device.
Configurable frames
Select 7 or 8 data bits, one or two stop bits and the documented parity modes for the target protocol.
Telegram buffering
The 2 kbyte buffer can retain as many as 255 telegrams, helping decouple CPU processing from serial reception.
Fast Startup support
The module supports Fast Startup in distributed operation where the surrounding PROFINET system is configured accordingly.

Diagnostics

DIAGNOSTICS
6ES7540-1AB00-0AA0
Official product-specific information
Module diagnostics
A diagnostic interrupt is available and the interface supports wire-break diagnostics.
Communication LEDs
Separate yellow RxD and TxD indicators show receive and transmit activity during commissioning.
Operating-state LEDs
Green RUN and red ERROR LEDs provide immediate module-state feedback.
Electrical separation
The RS422/RS485 interface is isolated from the backplane bus and type-tested at 707 V DC.

Installation

INSTALLATION
6ES7540-1AB00-0AA0
Official product-specific information
Mechanical installation
Mount the 35 × 147 × 127 mm module on an S7-1500 mounting rail and allow front-panel access.
Interface wiring
Use RS422 or RS485 terminal assignments from the Siemens manual and keep the selected mode consistent with the remote device.
Cable design
Check topology, shielding, termination and cable type before using the documented maximum length of 1200 m.
Commissioning checks
Match data rate, character bits, stop bits, parity and Freeport or 3964(R) framing on both communicating devices.

FAQ

FAQ
6ES7540-1AB00-0AA0
Product verification and procurement guidance
Q1. How can the exact communication module be verified?
Check that the module label, packaging and quotation all state 6ES7540-1AB00-0AA0 and CM PtP RS422/485 BA. Verify the 35 mm width and one RS422/RS485 interface.
Q2. How can New, Used or Refurbished condition be identified?
Request dated photos of the Siemens label, interface connector, rear bus connector, housing and packaging. New stock should show no connector wear, rail marks or cabinet labels.
Q3. How should the supplier be qualified?
Verify legal registration, a traceable company payment account and a written offer naming 6ES7540-1AB00-0AA0, condition, quantity and accessory scope.
Q4. What must engineering confirm before ordering?
Confirm RS422 or RS485 mode, 19.2 kbps limit, 1200 m cable limit, Freeport or 3964(R), frame format, 35 × 147 × 127 mm size and STEP 7 compatibility.
Q5. Which physical evidence should be obtained before payment?
Request current photos of the full part-number label, front interface, rear connector, hardware status, packaging and ordered quantity beside the PO reference.
Q6. Can another CM PtP suffix be used instead?
Not without review. BA, HF, RS232 and later replacement variants can differ in interface, speed, telegram length, protocol functions and engineering requirements.

Recommend Models

RECOMMEND MODEL
6ES7540-1AB00-0AA0
Random cross-brand industrial automation models
IRM-8DIAI
TPMC-4SM-BS
HD110C
ABB TU531 C4 1SAP217200R0001
GE RL4RD022TD 113026
ABB DIM8H MOD600ADIM8H
MPW-6 RS-232
BCM603-2S
L200
0F5027
SPR-8695PS
abb 2RCA023019A0003K 2RCA023009M COM0033
TSW2000000B0
0-900-78-615-0 SP:4BAR
SXWAO8XXX10001
HD2-FBPS-123.500 PN 180995
UAX-008
MR-52
HDL-MD0602.432
TF-AEC-6822-C3-1010
DUS704W
1-5F
KSS2-GW-MOD PN:38315
51304540-200 LCNE2
ABB APBU-44C APBU-44CE
KFD2-UT2-1 116916
SMR800PS24
4164-2F
AVAYA J139 700513916
TM221C24T
RS20-0400S2S2EDHEHH05.0.02
IC200CBL001A
XPDO4
DS2100N-1200
ABB 3F 16/20A REG EM/S3.16.1 2CDG110148R0011
AN200
P026-01-B
RK 926
LBB1856/00
IC695CHS012PCIONLY-FA
RT-ESM-SNDE-H3
Psr-scp-230uc
CNX-B12B
CLSE1L230
MU-KDPR05 /51201397-005
IC11C00THD300
1170A
AAM11
4-20MA
EL5501D8000
100-FPTA180
505C806G13 A200 SZ 00-1
1756-IB16D
AAR145-S03
TS16
CRK0131 MO11AA002-1
IQ8QUAD
SPIDER-PL-20-07T1M2M299TWVHHHH
ABB AM/EB0000000B
333D

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000