ALL PRODUCTS

Bently Nevada 31000 Series 31000-28-05-00-066-03-02 Proximity Probe Housing Assembly

Bently Nevada 31000 Series 31000-28-05-00-066-03-02 Proximity Probe Housing Assembly

BENTLY NEVADA | 31000 SERIES

31000-28-05-00-066-03-02

PPS Proximity Probe Housing Assembly with 3300 XL 8 mm multiple-approval probe

CONFIGURATION: 0.5 m probe cable | No standoff adapter | 6.6 in probe penetration | Fitting option 03 | 3/4-14 NPT mounting

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 31000 series 31000 28 05 00 066 03 02 proximity probe housing assembly-1

Overview
Technical Data
Inquiry
Construction
Installation
Selection Guide
Environment
FAQ
Recommend Models
Recommended Products

Bently Nevada 31000 Proximity Probe Housing Assembly

Exact configured model: 31000-28-05-00-066-03-02

Official product identity

The 31000 assembly provides external access to a proximity probe mounted through the machine case. This configuration combines the conductive PPS housing with a 3300 XL 8 mm multiple-approval probe, 0.5 m cable and the complete 3/4-14 NPT outer-sleeve mounting arrangement.

Configured geometry

No standoff adapter is supplied. Probe penetration is 6.6 in (167.6 mm). Option F:02 supplies the 3/4-14 NPT outer-sleeve mounting arrangement with retainer and retaining nut.

Connection package

Option E:03 supplies two plugs, one 3/4-14 NPT fitting, one 3/4-14 to 1/2-14 NPT stainless steel reducer and one cable seal grip with three grommet ranges.

Installation focus

Install the outer sleeve in the machine case, set the probe gap, slide the retainer under the retaining nut and tighten the assembly. The 6.6 in C + D dimension is below the 12 in support threshold stated in the datasheet.

Procurement check

Match every segment of 31000-28-05-00-066-03-02. The multiple-approval probe, 0.5 m cable, 6.6 in penetration, fitting package and 3/4-14 NPT outer-sleeve mounting hardware must all match.

Technical Data

Official configuration and specifications

Complete model	31000-28-05-00-066-03-02
Product family	Bently Nevada 31000 Series
Product type	English proximity probe housing assembly
Probe	3300 XL 8 mm probe, multiple approvals (option 28)
Probe cable length	0.5 m (20 in)
Standoff adapter	None (option 00)
Probe penetration	6.6 in (167.6 mm), option 066
Fittings	Two plugs; one 3/4-14 NPT fitting; one 3/4-14 to 1/2-14 NPT SST reducer; cable seal grip with grommets
Mounting thread	3/4-14 NPT with outer sleeve, retainer and retaining nut (option 02)
Housing material	Glass-reinforced conductive PPS thermoplastic
Sleeve material	AISI 304 stainless steel
Dimensions	Configured C + D dimension: 6.6 in (167.6 mm)
Weight	1.2 kg (2.6 lb) typical
Protection rating	CSA Type 4X; IP66 verified
Probe temperature	-51 to +177 °C (-60 to +351 °F), operating and storage
Standard	API 670 compliant housing assembly
Official document	Datasheet 141610 Rev. R, pages 1–6, 9, 15–16

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Construction

PPS enclosure

The conductive, glass-reinforced PPS housing provides corrosion resistance and external access to the probe connection without machine disassembly.

Stainless-steel mounting parts

The probe sleeve and retaining chain use AISI 304 stainless steel. The outer sleeve and exterior screws use AISI 303 stainless steel.

Configured transducer

Option A:28 installs a 3300 XL 8 mm probe with multiple approvals, while option B:05 specifies the 0.5 m probe lead.

Complete mounting package

Option F:02 includes the 3/4-14 NPT outer-sleeve interface, retainer and retaining nut required by the standard installation procedure.

Installation

Outer sleeve

Install the 3/4-14 NPT outer sleeve into the machine case and verify thread engagement and orientation.

Probe penetration

Insert the probe sleeve and set the 6.6 in configured penetration before adjusting the electrical gap. The selected length remains below the 12 in support threshold.

Housing assembly

Disconnect the probe cable, fit the housing over the outer sleeve, slide the retainer under the retaining nut and tighten the nut.

Final enclosure

Reconnect the probe cable, install the selected fittings, place the cover and tighten the captive screws. Tighten unused-hole plug nuts to 0.5 N·m when applicable.

Selection Guide

31000

English PPS proximity probe housing assembly.

28 | Probe

3300 XL 8 mm probe with multiple approvals.

05 | Cable

0.5 m (20 in) probe cable.

00 | Standoff

No standoff adapter.

066 | Penetration

6.6 in (167.6 mm) probe penetration.

03 | Fittings

Two plugs, 3/4-14 NPT fitting, SST reducer and cable seal grip.

02 | Mounting thread

3/4-14 NPT outer sleeve with retainer and retaining nut.

Environment

Protection

CSA Type 4X and IP66 ratings apply to the 31000/32000 housing design when correctly assembled.

Temperature

The 3300 XL 8 mm probe is specified for -51 to +177 °C operating and storage temperature.

Mechanical installation

Typical weight is 1.2 kg. The official recommended retaining-nut torque is 29.4 N·m for the installed outer-sleeve configuration.

Hazardous-area use

The enclosure is not explosion proof. Use in an intrinsically safe installation requires an approved transducer system, appropriate barriers and end-user approval verification.

FAQ

Q1. How can purchasing confirm the exact quoted configuration?

The label and quotation must show 31000-28-05-00-066-03-02. Verify the multiple-approval 8 mm probe, 0.5 m cable, no standoff, 6.6 in penetration, option 03 fittings and F:02 mounting hardware.

Q2. What evidence separates a new assembly from a used or rebuilt one?

Request dated close-ups of the PPS cover and base, probe tip, stainless sleeve, 3/4-14 NPT outer sleeve, retainer, nut, cable and fittings. Used units may show gasket compression, thread wear, sealant, impact marks or cable handling damage.

Q3. How should supplier reliability be checked?

Match the legal company name, registration, address and bank beneficiary. Require traceable photographs tied to the quotation and compare the exact ordering code with datasheet 141610 Rev. R.

Q4. What must an engineer check before ordering this 6.6 in configuration?

Confirm machine-case thread, 167.6 mm penetration, probe gap, 0.5 m cable reach, option 03 conduit arrangement, available housing clearance and the required 3/4-14 NPT outer sleeve.

Q5. Which physical proof should be obtained before payment?

Obtain photos or video of the full model label, probe, cable, sleeve, outer-sleeve hardware, retainer, retaining nut, plugs, fitting, reducer and cable seal grip in one traceable inspection set.

Q6. May the 2.0 in F:00 version be used instead?

No direct substitution is justified. The 020/F:00 version changes both penetration and mounting hardware. Mechanical fit, target location and housing installation must be re-engineered before any change.

Recommend Models

60 randomly selected industrial automation models

SPASI23	DS3800NDAC1B1C	T8151C
X-PS 01	CC-PAIL51	T8461C
FBM246	EPRO MMS6312	2715P-T10CD
5466-315	TDM4.1-020-300-W0	8EI2X2HWD10.0600-1
ProSoft MVI69E-MBS	X-COM 01 001	1336F-BRF50-AA-EN
A 5X00419G02 Ethernet Link Controller	HDS03.2-W100N-HS32-01-FW	80190-220-01-R
1761-L32BWA	Yokogawa AAI543-S50/K4A00	KJ3241X1-EA1
CC-PCNT02	160-BA04NSF1	2707-V40P2N
1783-BMS10CGP	3HAC057544-006	Yokogawa ADV151-E60/D5A00
2711P-T15C21D8S	Edge Controller IC695CPL410	MPC4 200-510-076-114
22B-D6P0N104	TRICONEX 3623	16 ACS580-01-206A-4
DKC03.1-040-7-FW	IMDSO14	5466-1141
IEMMU21	ProSoft PLX51-DNPS	HCS01.1E-W0008-A-03-B-ET-EC-NN-L4-NN-FW
22B-B012N104	TRICONEX 3636R	EJA110E-JMS4G-717EB/NF
Siemens 6ES7522-1BH10-0AA0	VME162PA-344SE	ABB SD833
MVME61006E-0161	1769-L23E-QBFC1B	AI880A
CC-PUIO31	TRICONEX 3703E	Emerson A6312
ProSoft PLX31-PND-MBS4	Yokogawa S2MMM843-SS1130	B 5X00453G01 Remote I/O Node Controller
INIIT13	ProSoft RLX2-IHNF-A	MVME147-012
2711R-T4T	DS200SDCCG1A	X20SI4100