ALL PRODUCTS

Bently Nevada 3300 XL 100630-00-79-05-01 8 mm Underwater Proximity Probe | Original New

Bently Nevada 3300 XL 100630-00-79-05-01 8 mm Underwater Proximity Probe | Original New

BENTLY NEVADA | 3300 XL UNDERWATER PROBES

100630-00-79-05-01

3300 XL 8 mm Underwater Proximity Probe

CONFIGURATION: 3/8-24 UNF sealed case with Tefzel tubing | 0.0 in unthreaded length | 7.9 in (200.7 mm) case length | 0.5 m cable | ClickLoc connector with protector

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Overview
Technical Data
Inquiry
Configuration
Applications
Installation
Compatibility
FAQ
Recommend Models
Recommended Products

Bently Nevada 100630-00-79-05-01

This complete 3300 XL ordering code specifies an 8 mm underwater proximity probe with a 304 stainless-steel sealed case, 3/8-24 UNF thread, Tefzel tubing, 7.9 in case length, 0.5 m total cable length and a miniature coaxial ClickLoc connector with protector.

Core selling point: a sealed probe-to-case interface rated to 34 bar (500 psi) nitrogen for underwater and exposed-liquid applications.

The connector end is not sealed and must not be submerged. The 304 stainless-steel probe case is not intended for salt-water service.

Official source: Bently Nevada document 175852 Rev. G, pages 1, 2, 6 and 9. Open official PDF

Technical Data

Complete model	100630-00-79-05-01
Brand	Bently Nevada
Product family	3300 XL Underwater Probes
Product type	8 mm underwater proximity probe
Core construction	3/8-24 UNF sealed case with Tefzel tubing
Unthreaded length	0.0 in (0 mm)
Overall case length	7.9 in (200.7 mm)
Total probe cable length	0.5 m (1.6 ft)
Connector and cable	Miniature coaxial ClickLoc connector with protector; standard cable
Probe tip diameter	8.0 mm (0.314 in)
Tefzel tubing outside diameter	0.25 in (6.35 mm)
Triaxial cable maximum diameter	0.150 in (3.81 mm)
Dimensions	8.0 mm tip diameter; 7.9 in case length; 0.0 in unthreaded length; 0.5 m total probe cable
Weight	Exact assembled weight is not separately published for 100630-00-79-05-01
Case material	304 stainless steel
Operating and storage temperature	-51 to +177 C (-60 to +351 F)
Pressure seal	34 bar (500 psi) nitrogen, tip-to-case interface
Connector immersion limit	Connector end is not sealed and must not be submerged
Salt-water suitability	304 stainless-steel case is not suitable for salt water
Compatible system	Standard 3300 XL 8 mm Proximitor Sensors and extension cables

Source: Bently Nevada 3300 XL Underwater Probes Datasheet 175852 Rev. G, pages 1, 2, 6 and 9.

Inquiry

CONTACT STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Configuration

Ordering Code Breakdown

100630	3300 XL 8 mm underwater probe, 3/8-24 UNF sealed case with Tefzel tubing
00	0.0 in (0 mm) unthreaded length
79	7.9 in (200.7 mm) overall case length
05	0.5 m (1.6 ft) total probe cable length
01	Miniature coaxial ClickLoc connector with protector; standard cable

Applications

Underwater and exposed-liquid service: Intended for applications such as hydroelectric plants and sewage-treatment facilities where the probe may be submerged or exposed to process liquid.

Machinery measurement: When used with a compatible 3300 XL 8 mm extension cable and Proximitor Sensor, the system measures shaft vibration and position.

Pressure boundary: The probe-to-case interface is rated to 34 bar (500 psi) nitrogen.

Service limits: The connector end must remain dry, and the 304 stainless-steel case is not suitable for salt-water service.

Installation

Mounting	Use the specified 3/8-24 UNF 2A forward-mount thread and preserve the exact 7.9 in case geometry.
Sealed fitting	Do not loosen the factory Swagelok fitting; the manufacturer warns that the seal can become ineffective.
Connector protection	Keep the ClickLoc connector end and its protector out of the liquid; only the probe assembly is designed for submersion.
Cable routing	Route the 0.5 m integral cable without sharp bends or mechanical stress and retain the connector protector.
System matching	Connect only to the correctly selected standard 3300 XL 8 mm extension cable and Proximitor Sensor.
Process safety	The user is responsible for safely containing any liquid or gas if leakage occurs.

Compatibility

Transducer family	Standard 3300 XL 8 mm proximity transducer system
Extension cable	Use the ordering length and connector arrangement selected for the standard 3300 XL 8 mm family
Proximitor Sensor	Compatible standard 3300 XL 8 mm Proximitor Sensor
Connector interface	Miniature coaxial ClickLoc with connector protector
Do not mix	Do not substitute 11 mm or 25 mm probe-family components for this 8 mm configuration
Exact suffix	00 / 79 / 05 / 01 must be verified because the suffix defines unthreaded length, case length, cable length and connector option

FAQ

Q1. How can I verify that the quoted probe is the exact 100630-00-79-05-01 configuration?

Request a clear nameplate and packaging photo showing the complete code. Verify the 100630 underwater 8 mm probe base, 00 unthreaded-length code, 79 case-length code, 05 cable-length code and 01 ClickLoc connector option.

Q2. How can I distinguish a new probe from a used or refurbished unit?

Ask for current photos of the 304 stainless-steel case, 3/8-24 threads, Tefzel tubing, 0.5 m cable, ClickLoc connector protector and original packaging. Check for tool marks, scratched threads, contamination, repaired cable or inconsistent labels.

Q3. How should I assess whether the supplier is legitimate and reliable?

Verify the supplier legal entity, business address, domain-based email, traceable quotation and bank beneficiary. Require the quotation to state 100630-00-79-05-01 in full and to reference the Bently Nevada 3300 XL underwater probe family.

Q4. Which engineering details should be checked before purchasing?

Confirm the 0.0 in unthreaded length, 7.9 in case length, 0.5 m cable, ClickLoc connector, 3/8-24 UNF mounting, -51 to +177 C range, 34 bar seal rating, liquid chemistry and the matching 3300 XL 8 mm extension cable and Proximitor Sensor.

Q5. What physical evidence should be requested before payment?

Request time-stamped photos or video showing the full label, sealed probe body, 8 mm tip, 7.9 in case, integral cable, Tefzel tubing, connector protector and package label. The seller should also show that the connector and cable are undamaged.

Q6. Can a similar suffix or another probe family replace 100630-00-79-05-01?

Not automatically. A suffix change can alter mechanical length, cable length or connector construction. An 11 mm or 25 mm probe-family component is not an equivalent 8 mm component. Replacement requires confirmation against the complete system and installation.

Recommend Models

AAP149	CC-TCF902	KJ3222X1-EA1
6ES7211-1BE40-0XB0	CI511-ETHCAT	SM560-S
1756-PA72	6ES7505-0RA00-0AB0	TU846
KJ3002X1-BG2	CI512-ETHCAT	PM582-ETH
TU845	CC-TAIX11	DI840
PM858K01	AI830A	ARM15B
6ES7288-3AR04-0AA0	6ES7223-1PL32-0XB0	6ED1055-1MB00-0BA2
DO524	DI830	1756-L81EP
6ES7288-2DR08-0AA0	SD831	6ES7288-1ST20-0AA1
6ES7553-1AA00-0AB0	CC-PFB401	1756-L75
TU831V1	5069-L330ERM	KJ3201X1-BA1
1756-IT6I	AO523	CI855K01
CI868K01	6GK7543-1AX00-0XE0	6ES7288-1CR60-0AA1
VE3051C4	1756-L85EP	6ES7288-7ST40-0AA0
KJ1501X1-BC2	6ES7221-1BH32-0XB0	1756-L74
SD832	TU847	1756-L61
6ES7288-1CR40-0AA0	VE3051C3	KJ3002X1-BB1
CC-TCNT02	6ES7321-7BH01-0AB0	1756-RM2
6ES7332-5HD01-0AB0	6ES7288-2DE08-0AA0	ASI133
KJ3001X1-BA1	1756-IF16	TU834