|
BENTLY NEVADA | 3300 XL
330104-00-08-15-02-00
3300 XL 8 mm Proximity Probe, M10 x 1 Thread, with Armor
|
|
Selection: 0 mm unthreaded length | 80 mm case | 1.5 m total length | standard cable | ClickLoc connector without protector | agency approval not required
LEAD TIME: In stock | WARRANTY: 1 year
|
OFFICIAL PRODUCT SUMMARY
Metric armored 3300 XL 8 mm proximity probe
This standard-mount probe is a component of the Bently Nevada 3300 XL 8 mm Proximity Transducer System for non-contacting radial vibration, axial position, Keyphasor reference and speed measurements.
|
Exact configuration: M10 x 1 metric probe with armor, 0 mm unthreaded length, 80 mm overall case length, 1.5 m standard cable, miniature coaxial ClickLoc connector without protector and no agency approval option.
Official datasheet:Baker Hughes document 141194 Rev. AN (relevant pages 1-9, 13-14 and 35).
|
|
Official specification for the exact order code
Baker Hughes datasheet 141194 Rev. AN, pages 4-9, 13-14 and 35
|
|
Complete model
|
330104-00-08-15-02-00
|
|
Product family
|
3300 XL 8 mm Proximity Transducer System
|
|
Product type
|
Standard-mount 8 mm proximity probe, M10 x 1 thread, with armor
|
|
Dimensions
|
8.0 mm probe tip; 0 mm unthreaded length; 80 mm case length; 1.5 m total length, +30% / -0%; armor OD 7.67 mm; armor ferrule 9.5 mm maximum
|
|
Weight
|
Probe: 323 g/m (11.4 oz), official typical value
|
|
Mounting thread
|
M10 x 1; maximum thread engagement 15 mm
|
|
Cable and armor
|
75 ohm triaxial FEP-insulated standard cable; flexible AISI 302 or 304 stainless-steel armor with FEP jacket
|
|
Connector
|
Miniature coaxial ClickLoc connector without connector protector; 7.24 mm maximum connector OD
|
|
Probe DC resistance
|
7.73 +/- 0.50 ohms for the 1.5 m probe length
|
|
Tensile strength
|
330 N probe case to lead; 270 N probe lead to extension-cable connectors
|
|
Operating / storage
|
Standard probe: -52°C to +177°C (-62°F to +350°F)
|
|
Matched system measurement
|
2 mm linear range; 7.87 V/mm scale factor; 0 to 10 kHz frequency response with matched 3300 XL 8 mm components
|
|
Agency option
|
00 - agency approval not required
|
|
CONTACT
STELLA
|
|
Machine condition monitoring use
|
|
Radial vibration
Measures dynamic shaft vibration when used with matched 3300 XL 8 mm components.
|
Axial position
Measures static position and displacement on a suitable conductive target.
|
|
Keyphasor reference
Supports phase-reference and speed measurements in the complete system.
|
Metric mounting
M10 x 1 case thread supports metric machine installation geometry.
|
|
Key selection note: This exact code uses a 1.5 m armored standard cable and an unprotected ClickLoc connector.
|
|
|
Part number breakdown
330104-00-08-15-02-00
|
|
330104
|
3300 XL 8 mm probe, M10 x 1 thread, with armor
|
|
00
|
Unthreaded length: 0 mm
|
|
08
|
Overall case length: 80 mm
|
|
15
|
Total length: 1.5 m (4.9 ft)
|
|
02
|
Miniature coaxial ClickLoc connector, standard cable, no connector protector
|
|
00
|
Agency approval not required
|
|
System matching and mounting checks
|
|
System length
Combine the 1.5 m probe with an extension cable so the total equals the selected 5 m or 9 m Proximitor sensor length.
|
Thread engagement
Use the M10 x 1 mounting thread and keep engagement at or below the published 15 mm limit.
|
|
Connector assembly
Two 3300 XL gold ClickLoc connectors are tightened finger tight; this code does not include a connector protector.
|
Component compatibility
3300 XL 8 mm components are physically and electrically interchangeable with non-XL 3300 5 mm and 8 mm components, with mixed-system performance limited to the non-XL specification.
|
|
Key selection note: Use an AISI 4140 steel target unless the system is specifically calibrated for another target material.
|
|
|
Published environmental limits
Standard-temperature configuration for this order code
|
|
Probe temperature
|
Operating and storage: -52°C to +177°C (-62°F to +350°F)
|
|
Relative humidity
|
Less than 3% change in Average Scale Factor after 93% humidity testing for up to 56 days to IEC 68-2-3
|
|
Probe materials
|
PPS tip; AISI 303 or 304 stainless-steel case; AISI 302 or 304 stainless-steel armor with FEP jacket
|
|
Cable type
|
Standard 75 ohm FEP-insulated triaxial cable
|
|
Connector protection
|
Option 02 does not include a connector protector
|
|
Agency option
|
00 - agency approval not required
|
|
Six checks before purchase
|
|
1. How can I verify that the quoted product is the exact complete model?
Require 330104-00-08-15-02-00 on the quotation, label evidence and shipment record. Confirm M10 x 1 armored construction, 0 mm unthreaded length, 80 mm case, 1.5 m total length, option 02 connector and option 00 approvals.
|
|
2. How can I distinguish New, Used or Refurbished condition?
Request the condition in writing plus current photos of the 8 mm tip, M10 x 1 case, armor, unprotected ClickLoc connector, packaging and serial markings. The part number alone does not establish condition.
|
|
3. How can I verify that a supplier is legitimate and reliable?
Match the registered company name, address and beneficiary data to the quotation and invoice, request traceable references, and require a product-specific quote citing Baker Hughes document 141194 Rev. AN.
|
|
4. What should engineering verify before purchase?
Check the M10 x 1 mount, 0 mm unthreaded section, 80 mm case, 1.5 m probe length, required extension-cable length, 15 mm maximum thread engagement and absence of agency approvals.
|
|
5. What physical evidence should be requested before payment?
Request dated photos or video of the exact label and complete unit, including close-ups of the probe tip, metric thread, armor and ClickLoc connector, plus agreed inspection or test evidence.
|
|
6. Can a similar model or suffix be substituted?
No automatic substitution should be accepted. A different suffix can change the unthreaded length, case length, total cable length, connector protection, cable type or approvals and must be rechecked by engineering.
|
|
Random cross-brand reference list
|
|
825-0043-2R 821-0019-1R
|
CNXAO-8
|
W28102J022A
|
|
LV429571 4P4D NSX100B TM80D
|
SPR-8695PS
|
104-IS 300PSI
|
|
116-010084D
|
ABB PM571 / 1SAP130100R0270
|
181B0331
|
|
1314414/4R8B
|
BPSPT-250-1-WT Y84305 18780
|
VCP02.1BRN-RS-NN-PW
|
|
EC3-X33
|
2TMA020070N0006
|
AMM-2F
|
|
XT2N160 1SDA067111R1
|
400116900 34001168XD-2FA
|
MA3751Z
|
|
MTN649204
|
3-6/3S1GYR
|
900NTNNEK00000-J001
|
|
E3751MS3A E3751MS3A_ GS
|
THS14-A11-30-N
|
SCMD4
|
|
B98080016 W35AB
|
SE-RCV-433
|
UB3-434
|
|
TYPE:3660
|
GN30
|
Liebert 417771G
|
|
2CDG110088R0011
|
RXMA1 RK211063AN
|
1C31166G01
|
|
SMARTPACK2 242100.601
|
PRO22IC
|
24683D
|
|
BO08B01KNX
|
SSB401-53
|
ETRSEQ.0003
|
|
PRT-PSU-DIN-8A
|
ATW-A49
|
TS 21703 04B
|
|
3HE09327AARA01
|
ML2-6
|
IP485G
|
|
FCA/S 1.1M
|
IOP304 TC/Mv 181503 REV E2/F
|
MR380
|
|
Pro-OX-100
|
UAX-008 8-02-0049/2
|
CN96211TR
|
|
M340 BMXCPS2010
|
RV033873300
|
SCMR0432
|
|
271019-AH
|
CP-8832-MIC-WIRED
|
AR8442
|
|
IDT622
|
6ES7650-1AL11-6XX0
|
Legrand 002659
|
EN
