|
BENTLY NEVADA | 3300 XL
330104-02-09-10-01-00
8 mm M10 x 1 Proximity Probe with Armor
|
|
Selection: 20 mm unthreaded length | 90 mm case length | 1.0 m total length | connector protector | agency approval not required
LEAD TIME: In stock | WARRANTY: 1 year
|
OFFICIAL PRODUCT SUMMARY
3300 XL 8 mm Proximity Probe
An armored metric-threaded eddy-current probe for non-contact displacement and vibration measurements as part of the 3300 XL 8 mm Proximity Transducer System.
|
Exact configuration: Code 02 specifies 20 mm unthreaded length; 09 specifies 90 mm case length; 10 specifies 1.0 m total length; 01 specifies ClickLoc connector with protector; 00 specifies no agency approval requirement.
Official datasheet:Document 141194 Rev. AN (specifications pages 4-9; ordering pages 13-14; dimensions page 35).
|
|
Technical Data
Official data for 330104-02-09-10-01-00
|
|
Complete model
|
330104-02-09-10-01-00
|
|
Product family
|
3300 XL 8 mm Proximity Transducer System
|
|
Product type
|
Armored M10 x 1 threaded proximity probe
|
|
Dimensions
|
8 mm tip; 20 mm unthreaded length; 90 mm case length; 1.0 m total length, tolerance +30 / -0 mm; maximum thread engagement 15 mm
|
|
Weight
|
323 g/m typical for armored probe
|
|
Measurement range
|
2.0 mm
|
|
Scale factor
|
7.87 V/mm +/- 5%
|
|
Frequency response
|
0 to 10 kHz
|
|
Probe DC resistance
|
7.59 +/- 0.50 ohm for 1.0 m probe
|
|
Connector
|
ClickLoc coaxial connector with connector protector
|
|
Cable type
|
75 ohm triaxial FEP cable with AISI 302 or 304 stainless-steel armor
|
|
Tensile strength
|
330 N probe case-to-lead; 270 N connectors-to-lead
|
|
Operating and storage temperature
|
-52 to +177 deg C for standard probe and cable
|
|
Agency approval option
|
00: agency approval not required
|
|
CONTACT
STELLA
|
|
Applications and features
|
|
Shaft vibration
Measures relative radial motion when installed against a suitable conductive shaft target.
|
Axial position
Supports thrust or position measurements with correct target geometry and mechanical setup.
|
|
Armored lead
Stainless-steel armor adds mechanical protection along the 1.0 m integral cable.
|
Connector protection
Option 01 includes a protector for the ClickLoc probe connector.
|
|
Key selection note: The 1.0 m integral cable is selected for a 1.0 m 3300 XL system and does not require an extension cable.
|
|
|
Part number breakdown
330104-02-09-10-01-00
|
|
330104
|
3300 XL 8 mm M10 x 1 probe with armor
|
|
02
|
20 mm unthreaded length
|
|
09
|
90 mm case length
|
|
10
|
1.0 m total length
|
|
01
|
ClickLoc connector with protector; standard cable
|
|
00
|
Agency approval not required
|
|
Installation and compatibility
|
|
Mechanical fit
Confirm the M10 x 1 thread, 20 mm unthreaded length, 90 mm case and 15 mm maximum thread engagement.
|
System length
Connect directly to a compatible 1.0 m 3300 XL Proximitor Sensor; no extension cable is used in the 1.0 m system.
|
|
Cable routing
Protect the armored lead from crushing and maintain the official 25.4 mm minimum bend radius.
|
Probe gap
Set the gap within the linear range using the matched system and the target material specified for calibration.
|
|
Key selection note: Verify mounting depth, target clearance, connector access and the exact 1.0 m Proximitor Sensor before installation.
|
|
|
Environmental data
Published probe limits and construction
|
|
Probe and cable temperature
|
-52 to +177 deg C operating and storage
|
|
Armor material
|
AISI 302 or 304 stainless steel
|
|
Cable jacket
|
FEP
|
|
Thread form
|
M10 x 1
|
|
Connector protection
|
ClickLoc connector protector included by option 01
|
|
Agency approval
|
Option 00: agency approval not required
|
|
Installation caution
|
Seal and protect the connector as required by the installed environment
|
|
Six checks before purchase
|
|
1. How can the quoted complete model be verified?
Require photographs showing 330104-02-09-10-01-00 on the probe label or traceable packaging. Confirm 20 mm unthreaded length, 90 mm case, 1.0 m armored lead and connector protector.
|
|
2. How can New, Used or Refurbished condition be distinguished?
Inspect the 8 mm tip, M10 x 1 threads, stainless-steel armor, ClickLoc connector and protector. New material should show no probe-tip rub, thread marks, armor kinks, connector wear or installation residue.
|
|
3. How can supplier legitimacy and reliability be checked?
Verify the legal entity, physical address, traceable quotation, bank beneficiary and written inspection process. Ensure every document identifies the full suffix -02-09-10-01-00 and new condition.
|
|
4. What must engineers check before purchase?
Check the 20 mm unthreaded length, 90 mm case, M10 x 1 mounting thread, 1.0 m cable, 7.87 V/mm scale factor, 2.0 mm range and compatibility with a 1.0 m Proximitor Sensor.
|
|
5. What physical evidence should be requested before payment?
Request dated close-ups of the nameplate, tip, thread, armor, connector and protector, plus dimensional images for the 20 mm unthreaded section and 90 mm case and a resistance test tied to this exact model.
|
|
6. Can a similar 330104 suffix replace this model?
Not automatically. Changing unthreaded length, case length, total cable length or connector-protector option can prevent mechanical fit or alter system compatibility. Match the complete suffix and 1.0 m system requirement.
|
|
Random cross-brand reference list
|
|
MC1476A
|
TPNN0077
|
LFC7520/00
|
|
TT-MJC-30M/100FT-MC-BLK
|
193-TAC16
|
ST4120
|
|
multi9 ATo 4x
|
ABB 746947
|
TSI TA410
|
|
ABB TA524 / 1SAP180600R0001
|
X12101314-1ABS
|
CG204
|
|
PAA2-4HVA-070
|
DT034B / SE206758R0001
|
WK7-2E
|
|
X2-10GB-LR 10-2036-05
|
MS100-NUCB00-SG
|
3RV2901-1J
|
|
ABB 3hne 00680-1/11
|
HEIE420318R3 XT375A-E
|
ABB CP-24/1.5
|
|
6149-2F
|
TU542 1SAP213200R0001
|
CM-LBPS900
|
|
PXA30-RS
|
QUINT-UPS / 24DC / 24DC / 10 / 2320225
|
ABB 2CDG110091R0011
|
|
ATW-T220aG
|
CLIOPR824A
|
QY10
|
|
Televes 7318
|
KPD-4400
|
5X829N
|
|
HVB16VDA3
|
BOVERI/DT034B/ SE206758R0001
|
FT2A-CBLR-1T-HD
|
|
ABB 1SAP450600R0001
|
FHX40 ,FHX40-21A , 52013873
|
QAP22
|
|
XCITE/IO/8UI ITEM3-2000U80000
|
RKR-1T12C
|
mfm383a-c-ce
|
|
MCS40A0015-5A3-4-00
|
LTE-ANTM2-SMA-D
|
WV-CP504E
|
|
BC9191-0100
|
POD45P5AH-E YPCT31513-1B
|
ABB 6818U-500 6800-0-2519
|
|
2CDG 110 072 R0011
|
RCM470LY-13 B94012019
|
CPM500
|
|
ABB PM571 1SAP130100R0100
|
ABB PM571
|
S-532-0 s UNC532
|
|
PCoeCVRS10 W3000
|
EV002
|
AT-UHD-EX-100CE-TX-PD
|
|
SS-MPPT-15L
|
E080-04
|
5350CB
|
EN
