ALL PRODUCTS

Bently Nevada 3300 XL 8 mm 330192-00-25-10-00 Extended Temperature Range Armored Proximity Probe

Bently Nevada 3300 XL 8 mm 330192-00-25-10-00 Extended Temperature Range Armored Proximity Probe

Bently Nevada 3300 XL 8 mm Extended Temperature Range Armored Proximity Probe

Complete Model

330192-00-25-10-00

Official Product Description

Bently Nevada 330192-00-25-10-00 3300 XL 8 mm extended temperature range proximity probe with 3/8-24 UNF thread, armor, 0.0 in unthreaded length, 2.5 in case length and 1.0 m total length.

CORE FEATURE: Armored 1.0 m ETR probe designed for probe and cable temperatures from -35 to +260 degrees C.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 3300 xl 8mm 330192 00 25 10 00 etr armored proximity probe-1

Overview
Technical Data
Inquiry
Applications & Features
Connections
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

330192-00-25-10-00 is a Bently Nevada 3300 XL 8 mm extended temperature range proximity probe with a 3/8-24 UNF thread and protective armor.

The complete ordering code specifies 0.0 in unthreaded length, 2.5 in overall case length, 1.0 m total length and no agency approval requirement.

The official 3300 XL 8 mm data specifies a 2 mm linear range, approximately 1.27 mm recommended gap and 0 to 10 kHz frequency response for the matched transducer system.

Technical Data

Complete model	330192-00-25-10-00
Brand	Bently Nevada
Product family	3300 XL 8 mm Proximity Transducer System
Product type	Extended temperature range armored proximity probe
Probe thread	3/8-24 UNF
Unthreaded length	0.0 in
Overall case length	2.5 in
Total length	1.0 m (3.3 ft)
Cable construction	75 ohm triaxial PFA-insulated ETR cable with flexible AISI 302 or 304 stainless-steel armor and FEP outer jacket
Linear range	2 mm (80 mils), approximately 0.25 to 2.3 mm
Recommended gap	Approximately 1.27 mm (50 mils), -9 Vdc
Frequency response	0 to 10 kHz, +0/-3 dB
Scale factor	7.87 V/mm (200 mV/mil), plus or minus 6.5 percent for the ETR system at 0 to +45 degrees C
Operating temperature	Probe and cable -35 to +260 degrees C under published ETR performance conditions
Minimum cable bend radius	25.4 mm (1.0 in)
Dimensions	0.0 in unthreaded length; 2.5 in overall case length; 1.0 m total probe length
Weight	The official datasheet does not state one exact assembled weight for this complete 1.0 m armored probe
Agency approval option	00 - Not required
Official source	Baker Hughes Bently Nevada datasheet 141194 Rev. AL, pages 5-8 and 15-16

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

Extended temperature range

Published ETR operation supports probe and cable temperatures from -35 to +260 degrees C.

Armored lead

Flexible stainless-steel armor and an FEP outer jacket protect the integral triaxial cable.

One-metre configuration

The ordering code specifies a 1.0 m probe length for compact installations.

Measurement performance

The matched system provides a published 2 mm linear range with 200 mV/mil nominal scale factor.

Connections

Signal cable	75 ohm triaxial PFA-insulated ETR cable
Cable protection	Flexible AISI 302 or 304 stainless-steel armor with FEP outer jacket
System length	1.0 m probe-only configuration
Target size	Minimum flat target diameter 15.2 mm; minimum shaft diameter 50.8 mm, with 76.2 mm recommended
Thread mounting	3/8-24 UNF probe thread with maximum thread engagement of 14.3 mm

Installation

01 - Verify the complete code

Match 330192-00-25-10-00 on the quotation, nameplate, packaging and official ordering information.

02 - Confirm the one-metre system

Verify that the application requires the published 1.0 m probe-only configuration before selecting electronics and routing.

03 - Prepare the mounting

Provide a 3/8-24 UNF mounting thread and keep thread engagement within the published 14.3 mm maximum.

04 - Set the probe gap

Establish approximately 1.27 mm mechanical gap, corresponding to about -9 Vdc in the published system data.

05 - Route the cable

Maintain at least 25.4 mm cable bend radius and protect the armored lead from crushing, abrasion and excessive tensile load.

Environment

Temperature

Probe and cable -35 to +260 degrees C for the published ETR performance conditions.

Probe materials

PPS probe tip with AISI 303 or 304 stainless-steel probe case.

Armor

Flexible AISI 302 or 304 stainless-steel armor with FEP outer jacket.

Maximum tensile strength

330 N between probe case and probe lead.

Agency approval

The 00 ordering option specifies that agency approval is not required.

Compatibility

Verify the 1.0 m configuration, target material, shaft geometry and selected sensor electronics before commissioning.

FAQ

Q1. How can the exact quoted 330192-00-25-10-00 be verified?

Match the complete 330192-00-25-10-00 code on the quotation, product label and packaging. Confirm 0.0 in unthreaded length, 2.5 in case length, 1.0 m total length, 3/8-24 UNF thread, armor and the 00 approval option.

Q2. How can New, Used or Refurbished condition be distinguished?

Request current date-marked photos of the complete label, probe tip, threaded case, armored lead, connector end and packaging. Look for tip wear, bent armor, damaged cable, thread marks, repaired joints or replaced labels.

Q3. How should supplier legality and reliability be checked?

Verify the supplier legal entity, registered address, payment beneficiary and traceable contact. The written offer should state Bently Nevada, complete 330192-00-25-10-00 code, condition, quantity and return terms.

Q4. Which specifications must engineering confirm before purchase?

Confirm the 3/8-24 UNF thread, 0.0 in unthreaded length, 2.5 in case length, 1.0 m probe-only configuration, armored ETR cable, 2 mm linear range and 1.27 mm recommended gap.

Q5. What physical evidence should be requested before payment?

Ask for one date-marked photo set showing the full label, ordering code, probe tip, thread, armor, complete 1.0 m cable and connector end, together with original packaging.

Q6. Can another 3300 XL probe suffix replace 330192-00-25-10-00?

Not automatically. Suffix positions change unthreaded length, case length, total length and approval status. Use the complete 330192-00-25-10-00 configuration unless engineering approves the exact alternative.

Recommend Models

60313995	S-1314821	A660-8014-T391
465219	220163-47	F-650748P4
1492-CABLE10D	IMD1 LED	200A-3PH/ED
AP-A02	WMZS2D10	1170-0106
DVB-S2 NTC/2280.xF 550-00049-000	HSK40E SGC10-70	145412400
AR880A	NR-2012-PM	2BC-12S-16
AMETEK Q’BRIEN 3080	100-5080-001	152SA400E
GE IS200EDCFG1AED	500-5M-25	RSP-320-24
ABB VSC12	VS7-8-FG-D	TPU321 IC9054
AIF01A A03B-0807-C011	BES008L	7SS5231-5CA01-1AA1/GG
HB8342A3	NT0317-1	CP32D-15A
Focus 3D X330	5-18M-10P	HC-B 24-EBUS
2000-1301	PS-12100	VCZAA1100/U
EE8345P001M0	DS3800HVDB1K1G/6BA06	1746-OB16
PPC-3100-VESAE	CSTVP-0752-CF	VIB5.600
RCMT32.5-1A	5SY4514-8	FTV400
CD3-Z7-1,202660	GH2BZ-S	WMZH2D20T
QRS411	G205-16 01	90190T
S811+T24N3S	L507910	30389211
SKF IMx-M 102G	NJ2-6.5-40-E2	P7SA-10F-ND