ALL PRODUCTS

Bently Nevada 3300 XL NSv 330901-00-30-10-11-05 FluidLoc Proximity Probe

Bently Nevada 3300 XL NSv 330901-00-30-10-11-05 FluidLoc Proximity Probe

Bently Nevada 3300 XL NSv FluidLoc Proximity Probe

Complete Model

330901-00-30-10-11-05

Official Product Description

Bently Nevada 330901-00-30-10-11-05 3300 XL NSv proximity probe with 1/4-28 UNF thread, 0.0 in unthreaded length, 3.0 in case, 1.0 m FluidLoc cable, ClickLoc connector protector and multiple approvals.

CORE FEATURE: One-metre FluidLoc probe with protected ClickLoc connection for process-compressor proximity measurements.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 3300 xl nsv 330901 00 30 10 11 05 fluidloc proximity probe-1

Overview
Technical Data
Inquiry
Applications & Features
Connections
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

330901-00-30-10-11-05 is a Bently Nevada 3300 XL NSv standard-mount proximity probe with a 1/4-28 UNF thread and no armor.

The complete ordering code specifies 0.0 in unthreaded length, 3.0 in overall case length, 1.0 m total length, a miniature coaxial ClickLoc connector with connector protector, FluidLoc cable and multiple approvals.

The matched 3300 XL NSv transducer system provides a published 1.5 mm linear range, 1.0 mm recommended gap, 7.87 V/mm nominal scale factor and 0 to 10 kHz frequency response.

Technical Data

Complete model	330901-00-30-10-11-05
Brand	Bently Nevada
Product family	3300 XL NSv Proximity Transducer System
Product type	Standard-mount proximity probe without armor
Probe thread	1/4-28 UNF-2A
Unthreaded length	0.0 in
Overall case length	3.0 in
Total length	1.0 m (39 in), +30 percent / -0 percent
Connector and cable	Miniature coaxial ClickLoc connector with connector protector and FluidLoc cable
Probe dc resistance	4.2 plus or minus 0.5 ohm for the 1.0 m probe
Linear range	1.5 mm (60 mils), approximately 0.25 to 1.75 mm
Recommended gap	1.0 mm (40 mils)
Scale factor	7.87 V/mm (200 mV/mil), +12.5 percent / -20 percent including interchangeability error
Linearity	Deviation from best-fit straight line less than plus or minus 0.06 mm
Frequency response	0 to 10 kHz, +0 / -3 dB typical with up to 305 m of field wiring
Materials	PPS probe tip, AISI 304 stainless-steel case and 75 ohm FEP-insulated coaxial cable
Operating temperature	-52 to +177 degrees C (-62 to +351 degrees F)
Storage temperature	-52 to +177 degrees C (-62 to +351 degrees F)
Minimum bend radius	25.4 mm (1.0 in)
Maximum thread engagement	0.375 in for the 1/4-28 probe case
Recommended probe-case torque	5.1 N m (45 in lb)
Agency approval option	05 - Multiple Approvals
Dimensions	Probe tip 5.26 mm maximum diameter; 0.0 in unthreaded length; 3.0 in case length; 1.0 m total length; cable 2.8 mm maximum outside diameter; connector 7.23 mm maximum outside diameter
Weight	Typical probe weight approximately 14 to 150 g; the official datasheet does not state the exact assembled weight of this complete configuration
Official source	Baker Hughes Bently Nevada datasheet 147385 Rev. R, pages 2-7, 11 and 30

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

FluidLoc cable

The FluidLoc cable option limits fluid migration through the coaxial cable in process applications.

ClickLoc connection

The gold-plated brass miniature coaxial connector locks in place and includes a connector protector.

Compact sensing range

The NSv system is optimized for a 1.5 mm linear range with a 1.0 mm recommended gap.

Process-compressor use

Improved chemical resistance and compact side-view characteristics support many process-compressor applications.

Connections

Probe connector	Miniature male coaxial ClickLoc connector, gold-plated brass
Connector protection	Fluorosilicone connector protector supplied by the selected 11 option
Probe cable	75 ohm FEP-insulated coaxial FluidLoc cable, 1.0 m total probe length
System compatibility	Mechanically and electrically compatible with 3300 NSv and previous 3300 RAM probe and extension-cable systems
Proximitor input	Use with the matched 3300 XL NSv Proximitor Sensor and approved extension-cable length

Installation

01 - Verify the complete code

Match 330901-00-30-10-11-05 on the quotation, product label, packaging and official order record.

02 - Prepare the mounting

Provide a 1/4-28 UNF mounting hole and keep thread engagement at or below the published 0.375 in maximum.

03 - Apply correct torque

Use the published 5.1 N m recommended probe-case torque for the 1/4-28 configuration.

04 - Set the measurement gap

Establish the 1.0 mm recommended gap and verify the matched system output before commissioning.

05 - Protect the cable and connector

Maintain at least 25.4 mm bend radius, avoid tensile damage and keep the connector protector correctly installed.

Environment

Temperature

Probe operating and storage range is -52 to +177 degrees C.

Probe materials

PPS sensing tip with an AISI 304 stainless-steel case.

Chemical resistance

The NSv probe provides increased chemical resistance compared with the earlier 3300 RAM probe.

Pressure sealing

A Viton O-ring seals differential pressure between the probe tip and case; individual probes are not pressure-tested before shipment.

Approval configuration

The 05 suffix specifies the published multiple-approvals option.

Target calibration

Published system specifications use a Bently Nevada AISI 4140 steel target unless another calibration is ordered.

FAQ

Q1. How can the exact quoted 330901-00-30-10-11-05 be verified?

Match the complete code on the quotation, probe label and packaging. Confirm 0.0 in unthreaded length, 3.0 in case length, 1.0 m FluidLoc cable, connector protector, no armor and the 05 multiple-approvals suffix.

Q2. How can New, Used or Refurbished condition be distinguished?

Request current date-marked photos of the probe tip, 1/4-28 thread, 3.0 in case, full 1.0 m cable, ClickLoc connector, protector and label. Check for thread wear, cable repairs, fluid contamination, bent parts or replaced labels.

Q3. How should supplier legality and reliability be checked?

Verify the supplier legal entity, registered address, payment beneficiary and traceable contact. The written offer should state Bently Nevada, complete 330901-00-30-10-11-05 code, condition, quantity and return terms.

Q4. Which specifications must engineering confirm before purchase?

Confirm the 1/4-28 UNF thread, 0.0 in unthreaded length, 3.0 in case, 1.0 m total length, FluidLoc cable, ClickLoc protector, 1.5 mm range, 1.0 mm gap and compatibility with the installed NSv electronics.

Q5. What physical evidence should be requested before payment?

Ask for one date-marked photo set showing the full label, complete suffix, probe tip, thread, case, full cable, connector, protector and original packaging, plus approval markings corresponding to the 05 option.

Q6. Can another 330901 suffix replace 330901-00-30-10-11-05?

Not automatically. Suffix positions change unthreaded length, case length, total length, connector protection, cable type and approvals. Use the complete configuration unless engineering approves the exact alternative.

Recommend Models

15021G002	360-120V-1SEC	NT2-12D
856T-BT6	6SE7026-0ED61-Z	7SD5321-4PB99-9HL6
FX-16E-500CAB-R	HD-4400OG-FRX-R3	CVR-RH-60400
Ach580-01-206a-4+J400	5531088 SCD 023-009-030	HFCT100/50
7SS52 7SS5231-5CA01-1AA1/FF	M10A6-AN	EM-038
3VA9110-0WC00	022363450	RXE2N0F7H132A
WMZT3D02	Ti450	SV1A00-5FU
E710 12-0418	MT123H	CES-SRG-BK-2X9
LEC-CN5-5	LC1D098BD	DX32
30389211	D4S20D-40MA5-B	DSLC-2
WMZS2D25	GE IS200JPDGH1A \| GE IS200JPDGH1ABD	PB5322
E22R2C	3D X130	ABB REC670 1MRK002814-AC
2002-1203	30206JR	S-D45DTZ-24C
KN-F10L24DC	SC-4-0	880PL-10mA-A
YG-1 07426 E2039064	Ti400	2190-E42AA
L23230X-2	PB5004	AP35-S1G-L
ASD21L10N	XC3S1500	2190-E22PA
T2000	375201-12 3716-12	Allen Bradley 500-B0A93
8501X040	DTFNR164D	777R-017
ABB REC670 1MRK004814-AC	3NSS009811-02	C10CX C10C-1