ALL PRODUCTS

Bently Nevada PROXPAC XL 330881-28-04-214-00-02 Proximity Transducer Assembly | Original New

Bently Nevada PROXPAC XL 330881-28-04-214-00-02 Proximity Transducer Assembly | Original New

BENTLY NEVADA · PROXPAC XL

330881-28-04-214-00-02

Metric Proximity Transducer Assembly

Standoff: 40 mm · Penetration: 214 mm · Mount: 3/4-14 NPT

Probe: 3300 XL 8 mm · Approval: Multiple Approvals

LEAD TIME: In stock WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 330881 28 04 214 00 02 proxpac xl assembly-1

Overview
Technical Data
Inquiry
Applications & Features
Operation
Construction
Installation
FAQ
Recommend Models
Recommended Products

OFFICIAL PRODUCT OVERVIEW

PROXPAC XL metric proximity transducer assembly

Bently Nevada 330881 integrates a 1 m 3300 XL 8 mm probe and Proximitor Sensor in a protective housing. This exact metric code specifies a Multiple Approvals probe, 40 mm standoff adapter, 214 mm probe penetration, no fittings with two plugs and two washers, and a 3/4-14 NPT mounting thread.

Core selection point: 40 mm standoff plus 214 mm penetration gives a 254 mm B+C installation length.

Technical Data

OFFICIAL DATA

Technical Data

Dimensions, weight, electrical and environmental values from the official Baker Hughes PROXPAC XL datasheet.

Complete model	330881-28-04-214-00-02
Product family	Metric PROXPAC XL proximity transducer assembly
Probe / approvals	3300 XL 8 mm probe with Multiple Approvals
Dimensions - housing depth	92.7 mm (3.65 in)
Dimensions - housing hex	42 mm (1.66 in)
Dimensions - standoff adapter	40 mm
Dimensions - probe penetration	214 mm
Dimensions - sleeve diameter	12.7 mm (0.50 in)
Weight	Typical total system weight 1.44 kg (3.18 lb) with a 0.3 m sleeve; exact configured weight is not separately stated
Fittings / mounting	No fittings; two plugs and two washers; 3/4-14 NPT mount
Power requirement	-17.5 to -26 Vdc without barriers at 12 mA maximum; -23 to -26 Vdc with barriers
Linear range	2 mm (80 mils), approximately 0.25 to 2.3 mm from target
Scale factor	7.87 V/mm (200 mV/mil), +/-5%
Frequency response	0 to 10 kHz, +0/-3 dB
Environmental rating	IP66 and Type 4X housing

Inquiry

CONTACTSTELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

APPLICATIONS AND PRODUCT VALUE

Applications & Features

Application fit and integrated-system benefits for the 330881-28-04-214-00-02 assembly.

Harsh-environment monitoring

The IP66 and Type 4X enclosure protects the integrated sensor electronics in industrial machinery locations.

Radial vibration

The installed 3300 XL 8 mm probe supports shaft-relative vibration measurement.

Axial position

Use for shaft-position monitoring where the 254 mm B+C installation length matches the mechanical arrangement.

Integrated system

Probe and Proximitor Sensor assembly

A 1 m probe is factory installed in the sleeve and connected inside the housing.

254 mm

Defined installation reach

The 40 mm standoff plus 214 mm penetration equals a 254 mm B+C length.

D00 / E02

Specified field interface

The code supplies no fittings, two plugs and two washers, with a required 3/4-14 NPT mount.

Operation

MEASUREMENT PRINCIPLE

Operation

How the PROXPAC XL package converts probe gap into a protected field signal.

Eddy-current measurement

The integrated 8 mm probe senses distance to a conductive shaft target without contact.

Internal conversion

The enclosed Proximitor Sensor converts probe response into a proportional voltage signal.

Direct field wiring

Terminals inside the housing accept field wiring, avoiding an external extension-cable connector at the assembly.

Static and dynamic output

Average voltage indicates gap or position while changing voltage represents shaft displacement.

Construction

PHYSICAL DESIGN

Construction

Housing, sleeve, probe and field-interface details confirmed for this PROXPAC XL code.

Housing

Conductive PPS enclosure

The glass-reinforced conductive PPS housing provides IP66 and Type 4X protection.

Sleeve

Stainless steel construction

The sleeve uses AISI 304 stainless steel and the outer sleeve uses AISI 303 stainless steel.

Probe

Integrated 3300 XL 8 mm sensor

The probe has a PPS tip, AISI 304 case and nominal resistance of 7.59 +/-0.50 ohm.

Field interface

Terminal wiring and sealed entries

The D00 option provides two plugs and two washers; field wiring is completed inside the housing.

Installation

FIELD CHECKS

Installation

Mechanical reach, mounting and wiring checks for the 214 mm penetration assembly.

Mechanical reach

254 mm combined B+C length

Confirm the 40 mm standoff and 214 mm penetration suit the mounting location and target position.

Fine adjustment

+/-12.7 mm sleeve adjustment

Use the threaded sleeve for final gap setting within the official adjustment allowance.

Mounting interface

3/4-14 NPT required

Option E02 is required with the standoff adapter; verify the mating thread and sealing arrangement.

Field wiring

16 to 24 AWG, up to 305 m

Route shielded field wiring within the official conductor-size and maximum-length limits.

FAQ

BUYER AND ENGINEER CHECKS

FAQ

Six model-specific questions for evaluating the exact configuration and the supplier behind the quotation.

How can the 214 mm PROXPAC configuration be verified?

Request current housing, sleeve, probe and label photos. Confirm 40 mm standoff, 214 mm penetration, D00 fittings option and 3/4-14 NPT mount against the order code.

What is the practical B+C length for this model?

The official code gives 40 mm standoff plus 214 mm penetration, producing a 254 mm combined length before final sleeve adjustment.

How should a buyer evaluate condition and originality?

Require a written condition statement, packaging evidence, close-up photos, terminal and housing views, and disclosure of any installation or repair history.

What must engineering confirm before installation?

Verify the 254 mm reach, 3/4-14 NPT interface, target geometry, field-wiring route, supply voltage and selected safety approvals.

What supplier evidence should be requested before payment?

Ask for legal entity details, traceable beneficiary, exact-model quotation, current photos, warranty wording, dispatch terms and discrepancy procedure.

Can a different 330881 penetration code be substituted?

Not without a mechanical review. Penetration changes installation reach and target position even when the housing and probe family appear identical.

Recommend Models

RANDOM STOCK REFERENCES

Recommend Models

Sixty models randomly selected from the supplied TXT lists; entries are not filtered by brand.

77009454	R26P	724-746-5500 2020158-001
1606-XL240DR	2CDG110122R0011	20-287
802T-DD	60-258-22	QUINT-UPS/24DC/24DC/5
600 L25	6ES7323-1BL00-0AA0	PQ3541
MPSR2-SHTW-GE	D751366 220-751366-401	MS-DIS1710-0
2300-192-00-02	VB552	0F5027 0FB-FPKG/US
BMXXBE2005	KMS15-24	M584
ALR121-S00 RS9422/RS-485	Allen Bradley 1771-QH	W1-S35
ZM18B-F-635-x5 PN ZM18RF065	700283690	6ES7422-7BL00-0AB0
FTM50-3GJ2A2A52AA	S4-34415	HHC12WM
TH210	FTA-554 17-550554-001	59629 1/5A
EM-09	GV2ME08	032F314832
CMDSLCZBU	RSN4004	DDLEDC605GL
1SDA059582R1	P9XPNVG 185002	0-900-78-615-0
077F1594 ETC1H1	EM6400	N200/SA-2 110-240VAC
Daliknx2Ch	AI-520	PHCPS.9-5008W
6GK5208-0BA00-2AB2 XB208	L-72	UE43-3MF2D3
GTD737	ADM51C-1-S3	DDFCUC024
XPR-A ST/N/04	APX 740	CHDIM4
P8 R8 DIN - 8	0N-10168 J5-S	VAZ-2FK-G10-BRIDGE 216026