ALL PRODUCTS

Bently Nevada PROXPAC XL 330881-28-04-265-00-02 Proximity Transducer Assembly | Original New

Bently Nevada PROXPAC XL 330881-28-04-265-00-02 Proximity Transducer Assembly | Original New

BENTLY NEVADA · PROXPAC XL

330881-28-04-265-00-02

Metric Proximity Transducer Assembly

Standoff: 40 mm · Penetration: 265 mm · Mount: 3/4-14 NPT

Probe: 3300 XL 8 mm · Approval: Multiple Approvals

LEAD TIME: In stock WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 330881 28 04 265 00 02 proxpac xl assembly-1

Overview
Technical Data
Inquiry
Applications & Features
Operation
Construction
Installation
FAQ
Recommend Models
Recommended Products

OFFICIAL PRODUCT OVERVIEW

PROXPAC XL long-reach metric transducer assembly

Bently Nevada 330881 integrates a 1 m 3300 XL 8 mm probe and Proximitor Sensor in a protective housing. This exact metric code specifies a Multiple Approvals probe, 40 mm standoff adapter, 265 mm probe penetration, no fittings with two plugs and two washers, and a 3/4-14 NPT mounting thread.

Core selection point: 40 mm standoff plus 265 mm penetration gives a 305 mm B+C installation length.

Technical Data

OFFICIAL DATA

Technical Data

Dimensions, weight, electrical and environmental values from the official Baker Hughes PROXPAC XL datasheet.

Complete model	330881-28-04-265-00-02
Product family	Metric PROXPAC XL proximity transducer assembly
Probe / approvals	3300 XL 8 mm probe with Multiple Approvals
Dimensions - housing depth	92.7 mm (3.65 in)
Dimensions - housing hex	42 mm (1.66 in)
Dimensions - standoff adapter	40 mm
Dimensions - probe penetration	265 mm
Dimensions - sleeve diameter	12.7 mm (0.50 in)
Weight	Typical total system weight 1.44 kg (3.18 lb) with a 0.3 m sleeve; exact configured weight is not separately stated
Fittings / mounting	No fittings; two plugs and two washers; 3/4-14 NPT mount
Power requirement	-17.5 to -26 Vdc without barriers at 12 mA maximum; -23 to -26 Vdc with barriers
Linear range	2 mm (80 mils), approximately 0.25 to 2.3 mm from target
Scale factor	7.87 V/mm (200 mV/mil), +/-5%
Frequency response	0 to 10 kHz, +0/-3 dB
Environmental rating	IP66 and Type 4X housing

Inquiry

CONTACTSTELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

APPLICATIONS AND PRODUCT VALUE

Applications & Features

Application fit and long-reach benefits for the 330881-28-04-265-00-02 assembly.

Harsh-environment monitoring

The IP66 and Type 4X enclosure protects the integrated sensor electronics in industrial machinery locations.

Long-reach shaft monitoring

The 265 mm penetration supports mounting arrangements that need extended reach to the target.

Axial or radial measurement

The integrated 8 mm system supports shaft-position or vibration measurement when target geometry is correct.

Integrated system

Probe and Proximitor Sensor assembly

A 1 m probe is factory installed in the sleeve and connected inside the housing.

305 mm

Maximum listed unsupported B+C threshold

The 40 mm standoff plus 265 mm penetration equals 305 mm; extra support is specified only when B+C exceeds 305 mm.

D00 / E02

Specified field interface

The code supplies no fittings, two plugs and two washers, with a required 3/4-14 NPT mount.

Operation

MEASUREMENT PRINCIPLE

Operation

How the long-reach PROXPAC XL package converts probe gap into a protected signal.

Eddy-current measurement

The integrated 8 mm probe senses distance to a conductive shaft target without contact.

Internal conversion

The enclosed Proximitor Sensor converts probe response into a proportional voltage signal.

Direct field wiring

Internal terminals accept field wiring while the sealed housing protects electronics and connections.

Static and dynamic output

Average voltage indicates gap or position while changing voltage represents shaft displacement.

Construction

PHYSICAL DESIGN

Construction

Housing, long sleeve, probe and field-interface details for this 265 mm penetration code.

Housing

Conductive PPS enclosure

The glass-reinforced conductive PPS housing provides IP66 and Type 4X protection.

Sleeve

Stainless steel long-reach construction

The sleeve uses AISI 304 stainless steel and the outer sleeve uses AISI 303 stainless steel.

Probe

Integrated 3300 XL 8 mm sensor

The probe has a PPS tip, AISI 304 case and nominal resistance of 7.59 +/-0.50 ohm.

Field interface

Terminal wiring and sealed entries

The D00 option provides two plugs and two washers; field wiring is completed inside the housing.

Installation

FIELD CHECKS

Installation

Reach, support, mounting and wiring checks for the 265 mm penetration assembly.

Mechanical reach

305 mm combined B+C length

Confirm the 40 mm standoff and 265 mm penetration place the probe within the required target range.

Sleeve support

Review support at the 305 mm threshold

The datasheet requires extra support when B+C exceeds 305 mm; this code totals 305 mm, so verify installation rigidity.

Mounting interface

3/4-14 NPT required

Option E02 is required with the standoff adapter; verify the mating thread and sealing arrangement.

Field wiring

16 to 24 AWG, up to 305 m

Route shielded field wiring within the official conductor-size and maximum-length limits.

FAQ

BUYER AND ENGINEER CHECKS

FAQ

Six model-specific questions for evaluating the exact configuration and the supplier behind the quotation.

What confirms that the offered unit has 265 mm penetration?

Request a current full-assembly photo and label image, then compare the C265 suffix and measured sleeve reach with the official ordering table.

Does this configuration require additional sleeve support?

Its B+C total is 305 mm. The datasheet requires extra support only when the total exceeds 305 mm, but installation rigidity should still be reviewed.

How can a purchaser detect incomplete or altered stock?

Inspect housing, cover, terminals, sleeve, probe tip, entry plugs, washers and label; request written disclosure of missing parts or prior installation.

Which engineering checks are essential before approval?

Confirm 305 mm reach, 3/4-14 NPT mount, target clearance, field-wiring path, supply voltage and required approvals.

How should supplier capability be verified for this assembly?

Check legal identity, traceable payment beneficiary, exact-model documentation, current photos, packaging plan, warranty terms and discrepancy handling.

Can the 214 mm version replace this 265 mm model?

Not without reviewing target position and mounting geometry. The 51 mm penetration difference directly changes installation reach.

Recommend Models

RANDOM STOCK REFERENCES

Recommend Models

Sixty models randomly selected from the supplied TXT lists; entries are not filtered by brand.

WGEN02KPI	Allen Bradley 22-HIM-A3	A9MEM3255 IEM3255
IP505R	ATL600	IZA 2120-HZ
ABB DO561 1TNE968902R2201	UA830USTV	UD1100001-01
86407BGRY	RTD0100-10-010-H	ACCAA-708-INT
LMS511-10100 1046135	KP35 060-113366	DXW-11-153-2 101655-01
PCOUMI2DN0	CP-168EL-A RS-232	3500/42M 140734-01H
19A3716X022	CX2500-0070	QBM30201U
IOP320 181545	SBD2D-06	12P2535X052 KJ3201X1-BA1
LQSE-4S1-D	HHU32100	2200-49532-012
WMC01-B	4K2	6160V
90-41-123973	DLH1000S	MFM384-RC
TC806D1056	A36AHA-9108	WCIQ81230
Jan-12	VTS804	ND20LITE-22100E0
TH-2 AN7001	MTDUVR120V	F2H FHP2 FHP2A04
31151-1A	L3.36700.B	DVI1500S
MTN6805-0008	523-000050-20 BCX416	ELRV-30/Z89
EC3-X33 PCN 807783	PDITE-SMRTVUE-01	M-IN-M201.07
PN 301508	M3081-61601 M3081-61602	2W3A00P1
ABB DI88 3BSE028586R1 3BSE020850R1	EPX-410D	LFI520 RIF-R
CC-TAIX01	TSXDEY08D2	5-240Aac