ALL PRODUCTS

Bently Nevada 7200 21500-00-28-10-02 5 mm Proximity Probe | Original New

Bently Nevada 7200 21500-00-28-10-02 5 mm Proximity Probe | Original New

BENTLY NEVADA | 7200 PROXIMITY TRANSDUCER SYSTEMS

21500-00-28-10-02

7200 Series 5 mm Standard-Mount Proximity Probe

CONFIGURATION: 0.0 in unthreaded length | 2.8 in overall case length | 1.0 m total probe cable length | Miniature male coaxial connector

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 7200 21500 00 28 10 02 5 mm proximity probe original new-1

Overview
Technical Data
Inquiry
Configuration
Applications
Installation
Compatibility
FAQ
Recommend Models
Recommended Products

Bently Nevada 21500-00-28-10-02

7200 Series 5 mm Standard-Mount Proximity Probe. The complete ordering identity must remain associated with its documented mechanical, electrical, environmental and approval configuration.

Core selling point: compact 5 mm probe for non-contact shaft vibration and position measurement.

Official source: 7200 5 mm and 8 mm Legacy Datasheet, pages official pages 1-9, 1-10 and 1-11. Open datasheet PDF

Technical Data

Complete model	21500-00-28-10-02
Brand	Bently Nevada
Product family	7200 Proximity Transducer Systems
Product type	5 mm standard-mount proximity probe
Probe diameter	5 mm nominal
Case thread	1/4-28 UNF
Lead armor	None
Unthreaded length	0.0 in
Overall case length	2.8 in (71.1 mm)
Total probe cable length	1.0 m (39 in)
Connector	Miniature male coaxial connector
Dimensions	5 mm nominal tip; 0.0 in unthreaded length; 2.8 in case length; 1.0 m total cable
Weight	Exact probe weight is not separately published; complete 7200 system typical weight is 0.59 kg (1.3 lb)
System calibrated range	2.0 mm (80 mil)
System scale factor	7.87 V/mm (200 mV/mil), +/-4% when calibrated as a system
System frequency response	0 Hz (DC) to 10 kHz
Probe and cable temperature	-34 to +177 C (-30 to +350 F)
Relative humidity	Up to 95%, noncondensing
Reference target	AISI 4140 steel

Source: 7200 5 mm and 8 mm Legacy Datasheet, pages official pages 1-9, 1-10 and 1-11.

Inquiry

CONTACT STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Configuration

21500	5 mm standard-mount probe, 1/4-28 thread, without armor
00	0.0 in unthreaded length
28	2.8 in overall case length
10	1.0 m total probe cable length
02	Miniature male coaxial connector

Applications

Non-contact radial shaft vibration measurement on rotating machinery.

Axial thrust-position and shaft-position measurement in a matched 7200 system.

Phase and diagnostic measurements when used with the correct Proximitor and monitor.

Compact 5 mm tip for installations with restricted mounting space.

Installation

Mounting	Use the 1/4-28 standard-mount thread and preserve the 2.8 in case reach.
Probe gap	Set the working gap within the matched 7200 system procedure.
Cable routing	Protect the unarmored 1.0 m integral lead and miniature coaxial connector.
System calibration	Use a matching 7200 extension cable and 5 mm Proximitor electrical length.
Target material	Confirm the documented AISI 4140 target basis or validate the actual target material.

Compatibility

Probe family	7200 Series 5 mm standard-mount system
Extension cable	Match the combined probe and extension-cable electrical length
Proximitor	Use the corresponding 5 m or 9 m 7200 Proximitor configuration
Connector interface	Miniature male coaxial connector
Do not mix	Do not substitute 8 mm or armored probes without recalculating the mechanical and electrical configuration

FAQ

Q1. How can I verify that the quoted product is the exact 21500-00-28-10-02 configuration?

Require a clear nameplate and package photo showing 21500-00-28-10-02 in full. Cross-check every option against the official ordering table: 21500 = 5 mm standard-mount probe, 1/4-28 thread, without armor; 00 = 0.0 in unthreaded length; 28 = 2.8 in overall case length; 10 = 1.0 m total probe cable length; 02 = Miniature male coaxial connector.

Q2. How can I distinguish a new unit from a used or refurbished one?

Inspect the label, connector, cable, mounting surfaces and packaging. New hardware should not show installation marks, repaired cable, contamination, refinished surfaces or inconsistent date and serial labels.

Q3. How should I verify that the supplier is legitimate and reliable?

Check the supplier legal entity, business address, domain-based email, bank beneficiary and traceable quotation. Require the quotation and invoice to state 21500-00-28-10-02 in full and identify the Bently Nevada 7200 Proximity Transducer Systems family.

Q4. Which technical details should an engineer confirm before purchase?

Confirm 5 mm tip, 1/4-28 thread, 0.0 in unthreaded length, 2.8 in case, 1.0 m lead, unarmored construction and miniature coaxial connector. Verify the connected monitor or signal-conditioning chain and the installation environment before replacement.

Q5. What physical evidence should be requested before payment?

Request time-stamped photos or video showing the 5 mm tip, 1/4-28 case, 2.8 in body reach, 1.0 m unarmored cable, miniature male coaxial connector and full legacy label. Ask for close-ups that allow the ordering code and condition to be read without relying on a catalog image.

Q6. Can a similar suffix or related model replace 21500-00-28-10-02?

Not automatically. 8 mm, armored, metric-thread or different electrical-length 7200 components are not automatic substitutes. A replacement requires documented mechanical, electrical, environmental and approval compatibility.

Recommend Models

PM590-ETH	VE3051C1	DI810
CC-GDOL11	ATSS3D	ANR10S
AKB331	1756-PB72	6ES7288-5DQ01-0AA0
TU841	6ES7288-1CR30-0AA1	DI825
SS832	ATSA3D	6ES7222-1AD30-0XB0
6ES7232-4HD32-0XB0	TB561-ETH	5069-L380ERM
6ES7654-7HY00-0XA0	1756-IA16	1756-L64
6ES7516-3FN02-0AB0	ASD533	6ES7400-1TA11-0AA0
CC-PCNT01	6ES7521-7EH00-0AB0	SM560-S
ASR133	ADV869	ASD143
KJ3001X1-BB1	1769-L16ER-BB1B	1756-L85EP
1756-DHRIO	5069-L320ER	6ES7231-4HA30-0XB0
6ES7288-1ST60-0AA1	1756-RM2XT	6ES7288-3AE04-0AA0
ACCC01	CI873K01	6GK7243-5DX30-0XE0
5069-L306ERMS2	TU833	AAI135
6ES7517-3AP00-0AB0	6ES7592-1AM00-0XB0	1756-IB16D
AAP149	1756-IR6I	TC-FXX102
AFV10D	ATSA3S	KJ2002X1-BA1
CC-GAOX21	KJ1501X1-BC1	CC-PAOH01
AFV10S	ARS55M	CI511-ETHCAT