Product Name:Fault Tolerant Ethernet Bridge Module
Brand Name: HONEYWELL
Model Number:TK-FTEB01
Country of Origin:USA
Warranty: 12 Months
Whatsapp：+86 18159889985
Email：[email protected]
Brand Name: |
HONEYWELL |
Model Number: |
TK-FTEB01 |
Country of Origin: |
USA |
Packaging Details: |
Original new Factory Sealed |
Delivery Time: |
Delivery time in stock |
Payment Terms: |
T/T |
|
Sales Manager: |
Stella |
|
Send an email: |
|
|
Contact in Whatsapp: |
|
Parameter |
Specification |
|
Model |
|
|
Manufacturer |
|
|
Part Numbers |
|
|
Product Type |
|
|
Series |
Chassis Series-A |
|
System Compatibility |
|
|
Ethernet Interfaces |
|
|
Network Protocol |
|
|
Redundancy |
|
|
Input Power |
|
|
Power Consumption |
|
|
Operating Temperature |
|
|
Storage Temperature |
|
|
Relative Humidity |
|
|
Weight |
|
|
Certifications |
|
|
Conformal Coating |
TK- designation indicates conformal coating applied |
The TK-FTEB01 is a Fault Tolerant Ethernet (FTE) Bridge module from Honeywell, engineered as a core networking component for Experion PKS distributed control systems. The TK-FTEB01 provides the critical interface between controller hardware and the FTE network, enabling redundant, deterministic communication across the Plant Control Network. Supporting dual redundant Ethernet paths, the TK-FTEB01 ensures uninterrupted data exchange between controllers, I/O subsystems, operator stations, and engineering workstations. The TK- prefix denotes conformal coating for protection against harsh or corrosive environments.
Fault Tolerant Ethernet (FTE): Implements Honeywell’s FTE architecture with dual redundant paths for automatic failover
I/O Control Network: Enables C200 and C300 controllers to communicate with Series-A Chassis I/O over the FTE supervisory network
BOOTP Server Integration: Receives IP addresses automatically from the Experion BOOTP Server service
Control Builder Configuration: Configured as an FTEB function block within Experion Control Builder
Network Tools (NTools): Supports firmware version checking and module status monitoring
Diagnostic Monitoring: Comprehensive status via front-panel 4-character display and three LEDs (A, B, OK)
Fault Tolerant Architecture: Dual redundant Ethernet channels ensure continuous operation during single-point failures
Conformal Coating: TK- designation provides protection against harsh, corrosive, or caustic environments
Hot‑Swappable: Modules can be replaced without system shutdown for maximum uptime
BOOTP Automatic Addressing: Receives IP addresses automatically from the BOOTP Server
Diagnostic LEDs: Visual status indicators (4-character display + A/B/OK LEDs) for quick troubleshooting
Redundant Chassis Pair Support: Compatible with redundant chassis pair configurations
Firmware Upgradable: Boot code and personality image can be updated via NTools
FTE Network Interface: Bridges the controller backplane to the Fault Tolerant Ethernet supervisory network
I/O Data Exchange: Enables C200 and C300 controllers to communicate with Series-A Chassis I/O modules
Redundant Communication: Maintains parallel connections to primary and secondary networks with automatic failover
IP Address Assignment: Receives IP address from BOOTP Server based on Device Index (set via BCD switches)
Diagnostic Reporting: Provides real-time status through front-panel display, LEDs, and Control Builder monitoring tabs
Inquiry Now :[email protected]
EN
