ALL PRODUCTS

Emerson DeltaV M-series KJ3002X1-BF1 8-Channel RTD Input Card | Original New

Emerson DeltaV M-series KJ3002X1-BF1 8-Channel RTD Input Card | Original New

EMERSON | DELTAV M-SERIES

KJ3002X1-BF1

RTD Input Card, 8 Channels

CORE FEATURE: Eight-channel 2-, 3-, and 4-wire RTD and resistance measurement.

KEY SELECTION: Pt100, Pt200, Pt500, Ni120, Cu10 | C3 keying | RTD terminal block

LEAD TIME: In stock | WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

Overview
Technical Data
Inquiry
Model Verification
Compatibility
Installation
Procurement Checks
FAQ
Recommend Models
Recommended Products

KJ3002X1-BF1 is the complete legacy marking for an Emerson DeltaV M-series 8-channel rtd input card. The selected official Emerson Product Data Sheet confirms eight-channel 2-, 3-, and 4-wire rtd and resistance measurement. Procurement should verify the complete nameplate, revision, C3 card keying, and RTD terminal block. The March 2026 ordering table may use a current VE assembly code and does not separately identify this legacy complete marking.

Technical Data

Parameter	Official specification
Complete model	KJ3002X1-BF1
Brand	Emerson
Product family	DeltaV M-series Traditional I/O
Product type	8-Channel RTD Input Card
Number of channels	Eight
Sensor wiring	2-, 3-, and 4-wire
Supported inputs	Resistance; Pt100; Pt200; Pt500; Ni120; Cu10; user-defined
Repeatability	0.05% of span
Resolution	16-bit
Calibration	Not required
Engineering units	Degrees C or F
Sensor excitation	100 microA
Common-mode rejection	120 dB at 50/60 Hz
Input impedance	Greater than 10 Mohm
LocalBus current	160 mA at 12 V DC nominal
Open sensor detection	1 second
Open millivolt lead detection	15 seconds
Card keying	C3
Terminal block compatibility	RTD terminal block
Dimensions	H 10.7 cm x W 4.1 cm x D 10.5 cm
Weight	Not separately published for KJ3002X1-BF1 in the selected official document
Protection rating	IP20
Operating temperature	-40 to 70 deg C (-40 to 158 deg F)
Storage temperature	-40 to 85 deg C (-40 to 185 deg F)
Relative humidity	5 to 95%, non-condensing
Airborne contaminants	ISA-S71.04-1985 Class G3; conformal coating
Certifications	CE, FM, CSA, ATEX, IEC-Ex, and marine certifications are available for M-series Traditional I/O; verify exact product markings

Source basis: Emerson DeltaV M-series Traditional I/O Product Data Sheet, March 2026. The current ordering table identifies the corresponding functional assembly; verify the exact legacy complete marking on the supplied unit.

Inquiry

CONTACT
STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Model Verification

Exact marking
KJ3002X1-BF1

Verify together
Nameplate, revision, C3 keying, terminal block

Ordering context
Current PDS may show a VE assembly code; do not substitute it for the complete marking

Compatibility

Carrier
DeltaV M-series horizontal or vertical carrier

Card keying
C3

Terminal block
RTD terminal block

Installation

Before mounting
De-energize field circuits and follow site hazardous-area procedures

Mechanical check
Confirm C3 keying and seat the card fully on the M-series carrier

Termination
Use the compatible RTD terminal block and verify field wiring before power-up

Procurement Checks

Identity
Confirm KJ3002X1-BF1 on a time-stamped nameplate photo

Electrical match
Pt100, Pt200, Pt500, Ni120, Cu10 | C3 keying | RTD terminal block

Physical evidence
Request connector, keying, revision, and RTD terminal block photos

FAQ

Q1. How can a buyer verify that the quoted unit is exactly KJ3002X1-BF1?

Require a clear nameplate photo showing KJ3002X1-BF1, the assembly and revision markings, and the C3 keying information. Confirm the supplied terminal block is RTD terminal block.

Q2. How can New, Used, or Refurbished condition be distinguished for KJ3002X1-BF1?

Ask for current, high-resolution photos of the front, side label, connector edge, and terminal interface. New condition should be supported by intact packaging and traceable labels; marks on connectors, screws, or keying parts can indicate prior installation.

Q3. How should supplier legitimacy be checked before purchasing KJ3002X1-BF1?

Verify the supplier's registered business details, physical contact channels, written quotation, traceable payment account, and willingness to provide time-stamped evidence of the exact KJ3002X1-BF1 unit.

Q4. Which specifications should an engineer confirm before ordering KJ3002X1-BF1?

Confirm the 8-channel rtd input card, Pt100, Pt200, Pt500, Ni120, Cu10 | C3 keying | RTD terminal block, the carrier and terminal-block arrangement, field power, environmental limits, and compatibility with the installed DeltaV M-series node.

Q5. What physical evidence should be requested before payment for KJ3002X1-BF1?

Request time-stamped photos or video showing the complete model, serial or revision label, connector condition, C3 key position, and the included RTD terminal block.

Q6. Can a similar suffix or related DeltaV card replace KJ3002X1-BF1?

Not automatically. Different suffixes can change channel function, keying, terminal block, isolation, or electrical ratings. Replacement requires engineering verification against the exact KJ3002X1-BF1 function and the installed system.

Recommend Models

Recommended Model	Recommended Model	Recommended Model
6ES7211-1BE40-0XB0	AAV142	KJ3002X1-BB1
ADV157	PM5012-R-ETH	CI851K01
6ES7223-1BL32-0XB0	ADV551	1756-PA75
KJ2003X1-BK1	1756-IA16	ANB10S
TB511-ETH	AAT141	CI868K01
6ES7288-1CR20-0AA1	5069-L306ERM	5069-L310ERMS2
ARS55M	1769-L30ER-NSE	ADV569
KJ3222X1-BA1	1769-L27ERM-QBFC1B	DI830
PM863K01	TU838	KJ3241X1-BA1
KJ2003X1-BB1	ARM55C	AAI835
6ES7214-1AF40-0XB0	6ES7523-1BL00-0AA0	CI871K01
TU515	KJ3002X1-BD1	TU849
DI525	CC-TAOX01	AKB337
6ES7231-4HD32-0XB0	1769-L33ER	ANB11D
1756-L82E	CC-PDOB51	5069-L306ER
6ES7322-8BF00-0AB0	ADV561	6ED1055-1MD00-0BA2
ARS15M	KJ4001X1-BA2	ASD533
1756-L81E	AI810	5069-L340ERMS2
6ES7214-1AG40-0XB0	CC-GDIL21	CC-TCF912
1756-IR6I	CC-PFB401	AFV30D