| EDDY CURRENT MEASURING CHAINPR6423/00C-031-CN CON041-CN | ||
| Product Name:PR6423 8mm Eddy Current Sensor with CON041-CN Converter | Direct product enquiryWhatsapp:+86 18020776782Email:[email protected] | |
| Brand Name:Emerson EPRO | Model Number:PR6423/00C-031-CN CON041-CN | |
| Place of Origin:Germany | Warranty:12 Months | |
| Sales | Phone/Whatsapp | |
|---|---|---|
| Jim Pei | [email protected] | +86 18020776782 |
| Model | PR6423/00C-031-CN CON041-CN |
| Manufacturer | Emerson EPRO |
| Sensor Family | PR6423 |
| Converter Type | CON041-CN |
| Converter Identification | 9200-00021-CN |
| Sensor Tip Diameter | 8 mm |
| Sensor Thread | M10 × 1 |
| Sensor Armor | No |
| Linear Measurement Range | 2 mm (80 mils) |
| Initial Air Gap | 0.5 mm (20 mils) |
| Incremental Scale Factor | 8 V/mm (203.2 mV/mil) ±5% at 0 to 45°C |
| Best-Fit Line Deviation | ±0.025 mm (±1 mil) at 0 to 45°C |
| Minimum Shaft Diameter | 25 mm |
| Adjusted Target Material | 42CrMo4 |
| Converter Frequency Range | 0 to 20,000 Hz (-3 dB) |
| Converter Rise Time | <15 µs |
| PR6423 Converter Measuring Range | 2.0 mm standard range |
| PR6423 Converter Linearity Error | ≤1.0% |
| Converter Supply Range | -23 to -32 VDC for -4 to -20 V output |
| Alternate Converter Supply Range | -21 to -32 VDC for -2 to -18 V output |
| Sensor Protection Class | IP66 to IEC 60529 |
| Converter Protection Class | IP20 |
| Sensor Operating Temperature | -35 to +180°C including 1 m cable |
| Cable and Connector Temperature | -35 to +150°C |
| Converter Operating Temperature | -30 to +100°C |
| Converter Mounting | DIN rail |
| Converter Connections | Screw terminals, maximum 1.5 mm² with wire-end sleeves |
| Converter Shock and Vibration | 5 g at 60 Hz and 25°C |
| Sensor Tip Material | PEEK |
| Sensor Case Material | Stainless steel |
| Sensor Cable Material | PTFE |
| Converter Housing Material | PA 6.6 |
| Sensor Weight | Approximately 100 g with 1 m cable |
| Converter Weight | Approximately 60 g |
| Minimum Order Quantity | 1 Piece |
| Price | Contact for Jim |
| Packaging Details | Original new Factory Sealed |
| Delivery Time | 3–7 Days |
| Payment Terms | T/T |
| Shipping Method | DHL / FedEx / UPS / TNT |
| Supply Ability | Brand new, In Stock |
PR6423/00C-031-CN CON041-CN is an Emerson EPRO 8 mm eddy current measuring chain consisting of a PR6423 sensor and a DIN-rail CON041-CN converter. The supplied identification plate shows converter type CON041-CN, identification 9200-00021-CN and sensor type PR6423/00C-031-CN. The chain is adjusted for a 42CrMo4 target and uses the PR6423 standard 2 mm measurement range. The sensor family provides an 8 V/mm scale factor and the converter supports dynamic signals to 20 kHz. Exact sensor and converter suffixes must remain paired during replacement.
PR6423/00C-031-CN CON041-CN measures non-contact shaft displacement, position, eccentricity and rotational speed in critical rotating machinery. The sensor creates an eddy-current response at the ferromagnetic target, while the converter conditions that response into a proportional voltage signal. Typical installations include turbines, compressors, pumps, fans and gearboxes.
Installation quality depends on target material, initial air gap, cable routing and the matched calibration of the complete chain. A replacement should be verified against both nameplates before commissioning.
The PR6423 probe generates a high-frequency electromagnetic field at the shaft surface.
Target movement changes the eddy-current losses and the sensor impedance.
The matched converter linearizes and scales the sensor response into a voltage signal.
The conditioned signal is used for displacement, position, eccentricity or speed monitoring.
| 01Matched sensor and converterThe exact PR6423 and CON041-CN identities are recorded together for replacement control. | 0242CrMo4 adjustmentThe converter nameplate confirms adjustment for the documented ferromagnetic target material. | 03Non-contact measurementThe eddy-current principle monitors shaft motion without mechanical contact with the target. |
| 04Wide dynamic bandwidthThe CON041 converter supports signals from static position through dynamic vibration frequencies. | 05Industrial temperature capabilityThe probe, cable and converter have separately defined operating-temperature limits. | 06DIN-rail signal conditioningThe converter integrates the measuring chain into a control or monitoring cabinet. |
| 01 | Warranty Support | Most products are covered by a warranty of up to 12 months, subject to the applicable terms and conditions. If any product-related issue occurs during the warranty period, our team will assist you and provide an appropriate solution. |
| 02 | Technical Documentation | Relevant datasheets and technical literature can be provided with the goods, offering useful information for product identification, installation, operation, and maintenance. |
| 03 | Fast Response | We understand the importance of minimizing equipment downtime. Our team responds promptly to inquiries and provides professional assistance with product information, quotations, order status, shipping, and after-sales questions. |
| 04 | Global Customer Service | We serve customers worldwide and provide reliable assistance from inquiry to delivery and after-sales service, ensuring clear and timely communication throughout the process. |
| 05 | Long-term Spare Parts Supply | We continue to source discontinued, obsolete, and hard-to-find automation parts from various brands, helping customers maintain existing equipment and reduce downtime caused by spare parts shortages. |
| LD5 | TM118 099-1003-07 | E100 |
| MK15-12EX0-PN/24VDC/K11 | MN80C | 807224 IQ8 |
| DT72 | 002612 | DL50F/S176 16276 |
| 9470-26-904-102 | 6MBI300U4-120-01 | RH328A |
| X-301-I | 6ES7421-7BH01-0AB0 | MC-1000-8M05A10-SC |
| KHA6-SR2-EX2.W 33804S | 251402-AP | TSW-552-BS 6506895 |
| KFA6-SR2-Ex2.W 103373S | FG-20i 1631005-003 | MTL5032 |
| HAI100 4K / 60-1364-01 | 9251-2-10 | F124x04 Fnr 07400030 |
| RH390 | 9470-004-A1 | TXM1.8X |
| FMM-4-20 L01-0259-001 | FC2XN-24-10AS | ABB 6126/01-83-500 |
| VE3A1102 | K9701PM / PLC24 | PNOZ S4 C 751104 |
| R134A / 067N5019 | 1756-0B16E | KNX-GW-DMX KNX/TP |
| OC-485 | GMP201-C | 110072003 |
EN
