ALL PRODUCTS

Bently Nevada 3300 XL NSv 330909-00-30-10-02-00 Armored Proximity Probe

Bently Nevada 3300 XL NSv 330909-00-30-10-02-00 Armored Proximity Probe

Bently Nevada 3300 XL NSv Armored Proximity Probe

Complete Model

330909-00-30-10-02-00

Official Product Description

Bently Nevada 330909-00-30-10-02-00 3300 XL NSv armored proximity probe with 3/8-24 UNF thread, 0.0 in unthreaded length, 3.0 in case, 1.0 m standard cable and ClickLoc connector.

CORE FEATURE: Armored 3/8-24 UNF NSv probe with a one-metre standard cable for robust proximity measurements.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 3300 xl nsv 330909 00 30 10 02 00 armored proximity probe-1

Overview
Technical Data
Inquiry
Applications & Features
Connections
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

330909-00-30-10-02-00 is a Bently Nevada 3300 XL NSv standard-mount proximity probe with a 3/8-24 UNF thread and stainless-steel armor.

The complete ordering code specifies 0.0 in unthreaded length, 3.0 in overall case length, 1.0 m total length, a miniature coaxial ClickLoc connector without protector, standard cable and no agency approval requirement.

The matched 3300 XL NSv system provides a published 1.5 mm linear range, 1.0 mm recommended gap, 7.87 V/mm nominal scale factor and 0 to 10 kHz frequency response.

Technical Data

Complete model	330909-00-30-10-02-00
Brand	Bently Nevada
Product family	3300 XL NSv Proximity Transducer System
Product type	Standard-mount armored proximity probe
Probe thread	3/8-24 UNF-2A
Unthreaded length	0.0 in
Overall case length	3.0 in
Total length	1.0 m (39 in), +30 percent / -0 percent
Connector and cable	Miniature coaxial ClickLoc connector without connector protector; standard 75 ohm FEP-insulated coaxial cable
Armor	Flexible AISI 302 stainless-steel armor with or without FEP outer jacket
Probe dc resistance	4.2 plus or minus 0.5 ohm for the 1.0 m probe
Linear range	1.5 mm (60 mils), approximately 0.25 to 1.75 mm
Recommended gap	1.0 mm (40 mils)
Scale factor	7.87 V/mm (200 mV/mil), +12.5 percent / -20 percent including interchangeability error
Linearity	Deviation from best-fit straight line less than plus or minus 0.06 mm
Frequency response	0 to 10 kHz, +0 / -3 dB typical with up to 305 m of field wiring
Materials	PPS probe tip, AISI 304 stainless-steel case and gold-plated brass connector
Operating temperature	-52 to +177 degrees C (-62 to +351 degrees F)
Storage temperature	-52 to +177 degrees C (-62 to +351 degrees F)
Minimum bend radius	25.4 mm (1.0 in), with or without stainless-steel armor
Maximum thread engagement	0.563 in for the 3/8-24 probe case
Recommended probe-case torque	11.3 N m for a 3/8-24 case; 7.5 N m when only the first three threads are engaged
Agency approval option	00 - Not required
Dimensions	Probe tip 5.26 mm maximum diameter; 0.0 in unthreaded length; 3.0 in case length; 1.0 m total length; cable 2.8 mm maximum outside diameter; armor 7.6 mm maximum outside diameter; connector 7.23 mm maximum outside diameter
Weight	Typical probe weight approximately 14 to 150 g; the official datasheet does not state the exact assembled weight of this complete configuration
Official source	Baker Hughes Bently Nevada datasheet 147385 Rev. R, pages 2-7, 11, 30 and 33

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

Stainless-steel armor

Flexible AISI 302 stainless-steel armor protects the one-metre probe lead from mechanical damage.

ClickLoc connection

The gold-plated brass miniature coaxial connector locks in place to resist loosening.

CableLoc and TipLoc construction

Published CableLoc pull strength is 220 N, while TipLoc molding provides a robust probe-tip bond.

Process-compressor use

Compact side-view characteristics and improved chemical resistance support many process-compressor applications.

Connections

Probe connector	Miniature male coaxial ClickLoc connector, gold-plated brass
Connector protection	Option 02 does not include a connector protector
Probe cable	75 ohm FEP-insulated standard coaxial cable, 1.0 m total probe length
Mechanical protection	Flexible AISI 302 stainless-steel armor, 7.6 mm maximum outside diameter
System compatibility	Mechanically and electrically compatible with 3300 NSv and previous 3300 RAM probe and extension-cable systems

Installation

01 - Verify the complete code

Match 330909-00-30-10-02-00 on the quotation, probe label, packaging and official order record.

02 - Prepare the mounting

Provide a 3/8-24 UNF mounting hole and keep thread engagement at or below the published 0.563 in maximum.

03 - Apply correct torque

Use 11.3 N m for normal 3/8-24 case engagement or 7.5 N m when only the first three threads are engaged.

04 - Set the measurement gap

Establish the 1.0 mm recommended gap and verify the matched-system output before commissioning.

05 - Route the armored lead

Maintain at least 25.4 mm bend radius and avoid crushing, twisting or over-tensioning the armor and cable.

Environment

Temperature

Probe operating and storage range is -52 to +177 degrees C.

Low-temperature caution

Sustained exposure below -34 degrees C may cause premature pressure-seal failure.

Probe materials

PPS sensing tip with an AISI 304 stainless-steel case.

Armor material

Flexible AISI 302 stainless steel with or without an FEP outer jacket.

Pressure sealing

A Viton O-ring seals differential pressure between the probe tip and case; probes are not pressure-tested before shipment.

Approval configuration

The 00 suffix states that agency approval is not required.

FAQ

Q1. How can the exact quoted 330909-00-30-10-02-00 be verified?

Match the complete code on the quotation, label and packaging. Confirm the 3/8-24 UNF thread, armor, 0.0 in unthreaded length, 3.0 in case, 1.0 m standard cable, unprotected ClickLoc connector and 00 approval suffix.

Q2. How can New, Used or Refurbished condition be distinguished?

Request current date-marked photos of the 5.26 mm probe tip, 3/8-24 thread, 3.0 in case, full armored lead, ClickLoc connector and label. Check for thread wear, crushed armor, cable repairs, contamination or replaced labels.

Q3. How should supplier legality and reliability be checked?

Verify the supplier legal entity, registered address, payment beneficiary and traceable contact. The written offer should state Bently Nevada, complete 330909-00-30-10-02-00 code, condition, quantity and return terms.

Q4. Which specifications must engineering confirm before purchase?

Confirm the 3/8-24 UNF thread, 0.0 in unthreaded length, 3.0 in case, 1.0 m standard cable, stainless-steel armor, ClickLoc connection, 1.5 mm range and compatibility with the installed NSv electronics.

Q5. What physical evidence should be requested before payment?

Ask for one date-marked photo set showing the full model label, probe tip, thread, case, entire armored lead, ClickLoc connector and original packaging, plus a measurement confirming the 1.0 m total length.

Q6. Can another 330909 suffix replace 330909-00-30-10-02-00?

Not automatically. Suffix positions change unthreaded length, case length, total length, connector protection, cable type and approvals. Use the complete configuration unless engineering approves the exact alternative.

Recommend Models

SNAP-PS24	70C1056G54	GE IS200SCLTH1ABB
DPS112	10250T4067	6311 2ZJEM
BL5005	IS200TREGS1BEC	97-1893
XC3S1500 FG676AFQ0433	516-412-H1-L	VF350BM / PN: 4102947-511
8000-84060-0000000 EXACT8,4XM8	STR82D-22E02J0-GFAGG00A0-A-CDC	CR120B
2130 /B213000	KJ4010X1-BF1	GE 489-P5-LO-A20
TB55730600F04	25SU3-2000	508684-30
SSA-EB1PL1-22	SACC-8P-DSI-M12MS/FS-M16	FL3R25194D412B
2002-1961	2155/40-01	7111HV
CNMA120416 TP100	AN8102-04	701N5B3B
NT0317-1	D-M9PVSBPC	JMVH-5-1/8-B
CPM-CABLE-CTRL-MU120	GE TEB132060WL	LD9000
J20B20	TK-3E	UFC400
D4S20D-40MA5-B	EK-1-15-R	LE11177
A90L-0001-0488 NMB 09225VA-24K-CL	TA2AW	PM3B5080AB6A0Z
ABB PM866A 3BSE076359R1	WMZH2C15	NGS-3U
ABB ACH580-01-206A-4+J400	OMICRON CPC100	35A-AAA-DBJ-1KD
MWLNL-16-3	872CP-N8NP18-E2	FS1464 T20IP/4.7lb-ft RK242-SET DCLNL205D
AR2-213 NPT 7-130	Ti400	FCA50CC50
VFS4500-5FZ	B&K 8520 120V/240V/2400W	EE8345P001M0