ALL PRODUCTS

Siemens 6DL1135-6TF00-0EH1 ET 200SP HA HART Output Module

Siemens 6DL1135-6TF00-0EH1 ET 200SP HA HART Output Module

Product Name: SIMATIC ET 200SP HA AQ 8xI HART Analog Output Module

Brand Name: Siemens

Model Number: 6DL1135-6TF00-0EH1

Place of Origin: Germany

Warranty: 12 Months

Whatsapp: +86 18020776782

Email: [email protected]

Appurtenance:

siemens 6dl1135 6tf00 0eh1 simatic et 200sp ha aq 8xi hart analog output module-1

Overview
Description
HART Integration
Loop Diagnostics
Specifications
Contact info
Commercial Term
FAQ
Other Products
Recommended Products

Eight-channel high-availability current output module with HART communication and channel diagnostics

AQ 8xI HART HA provides eight short-circuit-proof current outputs with HART support, 16-bit resolution for 4 to 20 mA operation and channel-level diagnostics. It supports redundancy with terminal block M1 and parameter updates during operation.

Loop, HART and terminal-block check: Confirm the exact output range, H1 or M1 terminal block, two-wire actuator loops, load resistance, channel parameters, HART device assignments and redundancy partner before replacement or commissioning.

Description

6DL1135-6TF00-0EH1 is the SIMATIC ET 200SP HA AQ 8xI HART analog output module. It supplies eight current loops, supports 0 to 10 mA, 0 to 20 mA and 4 to 20 mA ranges and provides HART communication, substitute values and channel diagnostics.

Commissioning should follow the approved hardware and channel configuration. Verify each loop with the field device safely isolated, confirm load and polarity, then test HART access, diagnostic reactions, quality information and redundant failover where used.

HART Integration

Channel assignment, current-loop design and HART device identity should be verified as one system.

Loop range

Match 0 to 10, 0 to 20 or 4 to 20 mA configuration to the connected actuator and control logic.

HART identity

Record device tag, polling address, parameter set and expected secondary variables before exchange.

Redundancy

Use terminal block M1 and the approved paired-module configuration when high availability is required.

Loop Diagnostics

Use channel diagnostics and a controlled loop test to separate wiring, load and parameter faults.

Wire break

Check loop continuity, terminal assignment, load and the configured output range before replacing the module.

Short circuit

Isolate the field loop, verify polarity and resistance and inspect the actuator or cable for a grounded fault.

Value quality

Review channel status, substitute-value behavior and HART communication together with the commanded output.

Specifications

Product type designation

AQ 8xI HART HA

Order number

6DL1135-6TF00-0EH1

Analog outputs

8 short-circuit-proof current outputs

Output ranges

0 to 10 mA, 0 to 20 mA and 4 to 20 mA

Resolution

Up to 16 bit including sign

Actuator connection

Two-wire current output

Load resistance

150 to 750 ohms in rated range

Terminal blocks

H1, M1, N0, H0 or M0; redundancy with M1

Supply

24 V DC, permissible range 19.2 to 28.8 V

Diagnostics

Supply, wire break, short circuit and overflow/underflow

Operating temperature

-40 to +70 degrees C horizontal; -40 to +60 degrees C vertical

Dimensions / weight

22.5 x 115 x 138 mm; approximately 160 g

Contact info

CONTACT

Jim Pei

[email protected]

+86 180 2077 6782

Commercial Term

Quotation

Current price and availability

Payment

T/T or agreed terms

Lead time

Confirmed with quotation

Shipping

DHL, FedEx, UPS or agreed freight

Warranty

12 months

FAQ

Which terminal block is required for redundant use of 6DL1135-6TF00-0EH1?

Siemens specifies redundancy capability with terminal block M1. Confirm the approved ET 200SP HA redundant pair, channel assignment, failover behavior and process reaction before installing either module.

How should a 4 to 20 mA actuator be connected to 6DL1135-6TF00-0EH1?

Use the documented two-wire output terminals, correct polarity and a load within the rated range. Parameterize the channel for 4 to 20 mA, then prove zero, span and the safe process response with the field loop controlled.

Why can 6DL1135-6TF00-0EH1 report wire break after replacement?

Check the selected range, terminal-block coding, channel wiring, actuator continuity and minimum loop load. Compare the restored parameter record with the original configuration before replacing the module again.

How can HART communication be verified on 6DL1135-6TF00-0EH1?

Confirm the channel is enabled for HART, identify the connected device and polling address and check loop current and load. Read the HART diagnostics and compare the device tag and parameters with the archived commissioning record.

Can 6DL1135-6TF00-0EH1 be reparameterized while the station remains in RUN?

The module supports parameter changes in RUN, but the resulting output, substitute-value and alarm behavior must be assessed. Apply one approved change at a time while monitoring channel quality and the controlled process.

What should be tested after installing 6DL1135-6TF00-0EH1?

Verify supply and module diagnostics, command each output through its approved range, confirm HART access and alarm reactions and test the substitute value. In redundant applications, perform the documented failover test before release.

Other Products

305228-PR	370710B-200	402712-PR
BA21747-040-00	SA6200A-201	750-841 3x750-432 3x 750-531 750-600
998-1105-016	9274CBTE-0010	DS10 LV CEAS410751-01-01 / HK50AA003
F9342LP-05	HMIDT551	MNL-13R MNL-13RF3
A5E00247018	SB401-13	42716625-V1
XSWM2APU2NQ15	GLB166.1P	BA327C
1606-XLE240EN	450-00019-004	LSM4N
TC906D1006	279221-PR	ABB RMBA-01
1756-CNBR/E PN:14151	50PLC-M03	QCS33
000435	51303932-476	2711-T10C20