ALL PRODUCTS

Siemens SIMATIC ET 200SP 6ES7131-6BF01-0BA0 DI 8x24 V DC ST Module | Original New

Siemens SIMATIC ET 200SP 6ES7131-6BF01-0BA0 DI 8x24 V DC ST Module | Original New

Siemens | SIMATIC ET 200SP

6ES7131-6BF01-0BA0

DI 8x24 V DC ST standard digital input module

Eight P-reading 24 V DC inputs, IEC 61131 type 3, BaseUnit A0 and 0.05-20 ms parameterizable delay.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

Overview
Technical Data
Inquiry
Outputs & Ratings
Installation
Diagnostics & Lifecycle
Compatibility
FAQ
Recommend Models
Recommended Products

Siemens SIMATIC ET 200SP 6ES7131-6BF01-0BA0 DI 8x24 V DC ST Module | Original New

Siemens 6ES7131-6BF01-0BA0 is a standard ET 200SP digital input module with eight 24 V DC P-reading inputs. It uses BaseUnit type A0, color code CC01 and supports module-level diagnostics.

Eight standard inputs

The module provides eight parameterizable digital inputs with an IEC 61131 type 3 characteristic and P-reading behavior.

Flexible input delay

Siemens specifies selectable input delay values from 0.05 ms to 20 ms for standard input operation.

Sensor supply and diagnostics

Eight sensor-supply outputs share up to 700 mA, with module-level monitoring for supply voltage, sensor supply, short circuit and wire break.

Compact ET 200SP format

The module is 15 mm wide and fits ET 200SP BaseUnit type A0 using color code CC01.

Technical Data

Complete model	6ES7131-6BF01-0BA0
Product family	SIMATIC ET 200SP
Product type	DI 8x24 V DC ST standard digital input module
Dimensions	15 x 73 x 58 mm (W x H x D)
Weight	Approx. 28 g
Rated supply voltage	24 V DC
Permissible supply range	19.2-28.8 V DC
Current consumption	50 mA maximum
Digital inputs	8; P-reading; IEC 61131 type 3
Signal 0 / signal 1	-30 to +5 V / +11 to +30 V
Input delay	0.05-20 ms, parameterizable
BaseUnit	Type A0
Color code	CC01
Sensor supply	8 outputs; 700 mA maximum per module
Operating temperature	-30 to 60 °C horizontal; -30 to 50 °C vertical, from FS02 below 0 °C
Engineering	TIA Portal V14 or later; STEP 7 V5.5 SP3 or later
Lifecycle status	Active product

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Outputs & Ratings

Eight digital inputs

Each of the eight channels is parameterizable and uses a P-reading 24 V DC input characteristic according to IEC 61131 type 3.

Selectable response time

Input delay can be set from 0.05 ms through 20 ms to match signal filtering and process response requirements.

Sensor supply

The module provides eight sensor-supply outputs with electronic short-circuit protection and a 700 mA maximum per module.

Installation

BaseUnit selection

Use ET 200SP BaseUnit type A0 and match the selected one-, two-, three- or four-wire connection arrangement.

Compact width

The 15 x 73 x 58 mm module format supports dense ET 200SP station layouts while maintaining correct terminal access.

Engineering setup

Configure the exact DI 8x24 VDC ST module in TIA Portal V14 or later and parameterize input delay and diagnostics per channel or module.

Diagnostics & Lifecycle

Diagnostic functions

The module supports diagnostic alarms, supply-voltage monitoring, sensor-supply monitoring, wire break and short-circuit diagnosis at module level.

LED indication

A green PWR LED, green channel LEDs and a green/red DIAG LED support power, input-state and module-status checks.

Environmental limits

For FS02 and later, Siemens specifies -30 to 60 °C horizontal and -30 to 50 °C vertical operation.

Compatibility

Station compatibility

Use the module in a compatible SIMATIC ET 200SP station and verify interface-module firmware, BaseUnit and engineering configuration.

Sensor compatibility

Confirm 24 V DC P-reading sensors, IEC type 3 levels, permitted quiescent current and the selected wiring method.

Exact suffix control

Do not substitute another DI suffix without checking channel count, input characteristic, diagnostics, BaseUnit, color code and delay range.

FAQ

Q1. How can the quoted input module be verified as the exact model?

Require a Siemens label showing 6ES7131-6BF01-0BA0 and confirm DI 8x24 V DC ST, BaseUnit A0, color code CC01 and eight P-reading inputs.

Q2. How can New, Used or Refurbished condition be distinguished?

Request dated photos of the housing, label, BaseUnit contacts, terminal side and packaging. Scratched contacts, worn latches or reworked labels must be disclosed.

Q3. How should supplier legitimacy be checked?

Verify the legal entity, registration, address, bank beneficiary and ET 200SP trading history, then compare the quotation with the Siemens official product page.

Q4. Which specifications must an engineer check before purchase?

Confirm eight 24 V DC type 3 inputs, P-reading behavior, 0.05-20 ms delay, BaseUnit A0, 700 mA sensor supply and TIA Portal compatibility.

Q5. What evidence should be requested before payment?

Ask for current photos or video showing the exact article number, module label, rear contacts, terminal side, quantity and packaging, plus written condition confirmation.

Q6. Can another 6ES7131 input module suffix replace this one?

No automatic substitution is valid. Channel count, input levels, sensor supply, diagnostics, delay range, BaseUnit and project configuration must all match.

Recommend Models

EPRO MMS6312	3HAC057544-006	TRICONEX 3703E
TRICONEX 8312	MVME61006E-0161	F3316
ABB SD833	2707-V40P2N	IC660BBD025
EJA110E-JMS4G-717EB/NF	80026-044-02	INIIT13
HCS01.1E-W0008-A-03-B-ET-EC-NN-L4-NN-FW	IEMMU01	3HAC058993-004
T8451C	MPC4 200-510-076-114	P0914TN
MVME5500	8EI2X2HWD10.0600-1	X20CP0483
Emerson A6120	IMDSO14	HDS03.2-W100N-HS32-01-FW
ProSoft MVI69E-MBS	MVME147-012	X20AI2622
DS200SDCCG1A	5466-316	RLC16 200-570-000-014
T8850C	INNPM22	KDA3.3-100-3-A00-W1
2711P-T15C21D8S	160-BA04NSF1	1761-L32BWA
Emerson A6312	MPC4 200-510-074-113	80190-480-01-R
2715P-T10CD	DS3800NDAC1B1C	1783-BMS10CGP
SPASI23	3HAC029896-001	RH928CY
VME162PA-344SE	ProSoft PLX31-PND-MBS4	Yokogawa S2MMM843-SS1130
22B-D6P0N104	DS200LDCCH1A	3HAC023020-003
T8151C	FCM2F4	RH916FN
80190-100-01-R	Tricon 3008	FBM246
B 1C31181G02 Remote I/O Module	1769-L23E-QBFC1B	Yokogawa ATD5A