ALL PRODUCTS

Siemens SIMATIC S7-1500 6ES7534-7QE00-0AB0 AI 4xU/I/RTD/TC / AQ 2xU/I ST Analog I/O Module | Original New

Siemens SIMATIC S7-1500 6ES7534-7QE00-0AB0 AI 4xU/I/RTD/TC / AQ 2xU/I ST Analog I/O Module | Original New

SIEMENS · SIMATIC S7-1500

6ES7534-7QE00-0AB0

AI 4xU/I/RTD/TC / AQ 2xU/I ST analog I/O module

ANALOG INPUTS 4 universal channels	ANALOG OUTPUTS 2 voltage/current channels
LEAD TIME In stock	WARRANTY 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

Overview
Technical Data
Inquiry
Applications
Functions
Diagnostics
Installation
FAQ
Recommend Models
Recommended Products

PRODUCT OVERVIEW

6ES7534-7QE00-0AB0

AI 4xU/I/RTD/TC / AQ 2xU/I ST analog I/O module

Combined analog I/O

One 25 mm module combines four universal analog inputs with two analog voltage or current outputs.

Input flexibility

The input section accepts supported voltage, current, resistance, RTD and thermocouple ranges with configurable integration and smoothing.

Output control

The two 16-bit outputs support standard U/I ranges, substitute values and diagnostic behavior for connected actuators.

Technical Data

TECHNICAL DATA

6ES7534-7QE00-0AB0

AI 4xU/I/RTD/TC / AQ 2xU/I ST analog I/O module

Complete model	6ES7534-7QE00-0AB0
Product family	SIMATIC S7-1500 / ET 200MP
Product type	AI 4xU/I/RTD/TC / AQ 2xU/I ST analog I/O module
Hardware / firmware	FS01 / V1.0.0
Dimensions	25 × 147 × 129 mm, W × H × D
Weight	Approx. 250 g
Supply voltage	24 V DC; permissible range 20.4 to 28.8 V
Current consumption	Maximum 200 mA at 24 V DC
Backplane-bus power	0.7 W
Typical power loss	3.3 W
Analog inputs	4 total; 4 U/I/TC and 2 R/RTD measurement channels
Analog outputs	2 U/I channels
Input ranges	Voltage 1 to 5 V and bipolar ranges to ±10 V; current 0 to 20, ±20 and 4 to 20 mA
Output ranges	Voltage 0 to 10 V, 1 to 5 V and ±10 V; current 0 to 20, ±20 and 4 to 20 mA
Thermocouple types	B, E, J, K, N, R, S and T
RTD / resistance	Ni100, Ni1000, LG-Ni1000, Pt100, Pt200, Pt500, Pt1000; 0 to 150/300/600/6000 Ω; PTC
Resolution	Maximum 16 bit including sign for inputs and outputs
Output cycle / conversion	Minimum cycle 3.2 ms; output conversion 0.5 ms per channel
Accuracy	Input operational limit 0.3%; output operational limit 0.3% for U/I
Load limits	Voltage output ≥1 kΩ; current output ≤750 Ω; capacitive load ≤1 µF; inductive load ≤10 mH
Cable length	Inputs: 800 m U/I, 200 m R/RTD, 50 m TC; outputs: 800 m current, 200 m voltage
Diagnostics	Supply, wire break, output short circuit, overflow and underflow
Operating temperature	Horizontal 0 to 60 °C; vertical 0 to 40 °C
Front connector	40-pole push-in front connector included

Inquiry

CONTACT

STELLA

Direct product inquiry

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications

APPLICATIONS

6ES7534-7QE00-0AB0

Official product-specific information

Compact mixed I/O

Use one module where a station needs both sensor acquisition and analog actuator control without separate AI and AQ modules.

Process-loop interface

Acquire transmitter or temperature signals and drive proportional valves, setpoint devices or other voltage/current actuators.

Temperature and resistance

Supported Pt, Ni and LG-Ni detectors, resistor ranges and B/E/J/K/N/R/S/T thermocouples cover varied measurement tasks.

Distributed stations

Deploy in S7-1500 or ET 200MP systems where the six channels are engineered through STEP 7 or TIA Portal.

Functions

FUNCTIONS

6ES7534-7QE00-0AB0

Official product-specific information

Four universal inputs

The input channels support voltage, current and thermocouple measurement, while two channels also support resistance and RTD.

Two configurable outputs

Each AQ channel can deliver a supported voltage or current range with substitute values for defined fault behavior.

Signal conditioning

Selectable integration times and four smoothing levels adapt acquisition to signal dynamics and interference frequency.

RUN-time maintenance

Parameter changes and calibration can be performed in RUN, subject to the machine commissioning procedure.

Diagnostics

DIAGNOSTICS

6ES7534-7QE00-0AB0

Official product-specific information

Input monitoring

Supported input ranges provide wire-break, overflow, underflow and supply-voltage diagnostics.

Output monitoring

Current outputs support wire-break detection and voltage outputs support short-circuit diagnostics.

Process limits

Two high and two low limits per input channel can generate limit interrupts.

Visual indication

RUN, ERROR, PWR and channel LEDs distinguish module status, channel state and channel diagnostics.

Installation

INSTALLATION

6ES7534-7QE00-0AB0

Official product-specific information

Space planning

Reserve the 25 × 147 × 129 mm envelope and clearance for the front cover, connector and shielded field wiring.

Connection hardware

The package includes a 40-pole push-in front connector; terminate each input and output according to Siemens channel diagrams.

Load verification

Before commissioning, verify output range, load resistance, capacitive or inductive load and permitted cable length.

Commissioning sequence

Confirm 24 V DC power, input sensor types, thermocouple compensation, output behavior, substitute values and diagnostic assignments.

FAQ

6ES7534-7QE00-0AB0

Product verification and procurement guidance

Q1. How can the quotation be matched to the exact module?

The label and quotation must state 6ES7534-7QE00-0AB0 and AI 4xU/I/RTD/TC / AQ 2xU/I ST. Verify FS01, the 25 mm width and the included 40-pole push-in connector.

Q2. How can New, Used or Refurbished condition be checked?

Ask for dated photos of the Siemens label, rear connector, front-contact area, housing and sealed accessories. Terminal impressions, rail scratches or field labels indicate prior installation.

Q3. What makes a supplier credible for this purchase?

Check business registration, payment to a traceable company account and a written offer listing 6ES7534-7QE00-0AB0, condition, quantity and connector scope.

Q4. Which engineering details must be confirmed?

Verify four universal inputs, two U/I outputs, selected ranges, load limits, 24 V DC supply, 16-bit resolution, 25 × 147 × 129 mm dimensions and software compatibility.

Q5. What physical evidence should be requested before payment?

Require current photos showing the full part number, hardware and firmware status, front and rear interfaces, connector package, seals and quantity next to the PO reference.

Q6. May a similar mixed analog module suffix be substituted?

Only after an engineering review. Different suffixes can change channel count, supported RTD/TC ranges, output loads, diagnostics, front connector or module width.

Recommend Models

RECOMMEND MODEL

6ES7534-7QE00-0AB0

Random cross-brand industrial automation models

XYTRONIX X-15s	SGDB-05VD	ABB DA502 1SAP250800R0001
P7620C0027B	MT953C MTM5200 M83PCS6TZ4AN	ZAPD-4-S
ipLDK-60	A750-1214-01	RCP-64PB-OLED 2RU
V309-SU-F2.50IN-PTF PN:U8423299	3AL78836ADAB 03	PSM-512S
ID22W00TCH300	DTK-120HW	PX145
DM3816D-3M-NB	966P	28UA 4M4F-RL4A-VT-SS-KG
200LS-D	ABB 3BSE013238R1 TU837V1 S800	ABB DA501 1SAP250700R0001
ABB CI582 / 1SAP228200R0001	GV3P40	XB4BA42
3RB2163-4GC2	ZE544-001A-521	ABL7 RM24025
4TKNX IP20	SEL 070-1961 REV C 4XX COMM5	MD7560
ANN840	EB0517 1674194	132B0035 FC-111
242100.601 SP2	STEP-PS/1AC/24DC/4.2 2868664	SGDV-1R9D21A
TST8804	CR104PLG22W	CA10-A250
8EP276A-UK	915V/I 12V ICP22i0350000	IO-35G01476-01
1756-PA75R/A	HFRC-01C	ABB 000 660-AN
400UNI 820BA229	401:C	700263502 IPSI-2
LNL-MTK15 CE-017-941	DDLE802	QMT2-4DB
MP2HI3HCGL	PM571 ABB DC525	WIQ82650
ABB JA/S 2.230.1 Q631 0071 R0111	PCB-FSC-960-03	GPD-3303D
RITTAL CMC III 7030.200	Extech 407910	SKDXX0531