ALL PRODUCTS

ABB AC500 V3 PM5670-2ETH Dual-Core Processor Module with Dual Ethernet, Serial and CAN Interfaces | Original New

ABB AC500 V3 PM5670-2ETH Dual-Core Processor Module with Dual Ethernet, Serial and CAN Interfaces | Original New

ABB AC500 V3

PM5670-2ETH

AC500 V3 dual-core processor module with 160 MB user program memory, dual independent Ethernet, RS232/RS485 and CAN interfaces, plus an integrated display.

KEY FEATURE: 160 MB user program memory with 1 GHz dual-core processing and dual independent Ethernet.

LEAD TIME: In stock WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

Overview
Technical Data
Inquiry
Functions
Interfaces
Installation
Compatibility
FAQ
Recommend Models
Recommended Products

ABB AC500 V3 PM5670-2ETH

High-performance dual-core programmable logic controller CPU module

Product Overview

PM5670-2ETH is an ABB AC500 V3 processor module identified by product ID 1SAP151000R0378. It is designed for demanding control, communication and motion applications.

Key Specifications

24 V DC supply; 160 MB user program memory; 512 MB RAM; 1024 MB flash; 1 GHz dual-core TI ARM Cortex-A53 processor; 0.002 us minimum instruction time.

Interfaces and Expansion

Two independent Ethernet interfaces, one configurable RS232/RS485 serial interface, one CAN interface, optional memory card support and expansion for up to 10 local I/O modules.

Mechanical Data

Net dimensions are 67.5 x 76 x 62 mm (W x H x D). Product net weight is 0.134 kg. Install on a dedicated TB56xx-2ETH terminal base.

Ordering Identification

Complete model PM5670-2ETH; ABB product ID and order code 1SAP151000R0378; EAN 4013614570926.

Technical Data

Complete model	PM5670-2ETH
Order code	1SAP151000R0378
Product family	ABB AC500 V3
Product type	Dual-core PLC CPU processor module
Dimensions	67.5 x 76 x 62 mm (W x H x D)
Weight	0.134 kg net
Supply voltage	24 V DC; permissible range 20.4 to 28.8 V DC
Current consumption	0.140 A typical with module alone; up to 0.800 A typical with all couplers and I/Os
Processor	Dual-core TI ARM Cortex-A53 64-bit RISC, 1 GHz
Memory	512 MB RAM; 1024 MB flash; 160 MB user program memory
Maximum downloadable application	176 MB
User program code and data	32 MB dynamically allocated
Minimum instruction time	0.002 us binary; 0.002 us word; 0.002 us floating-point
Minimum cyclic task	0.5 ms
Ethernet	Two independent interfaces with two RJ45 connectors; separate MAC addresses; switch operation supported
Serial interface	One configurable RS232/RS485 interface via pluggable spring terminal block
CAN interface	CANopen Master, CAN 2A/2B and J1939 via two 5-pole pluggable spring terminal blocks
Local I/O expansion	Up to 10 local extension modules; up to 320 digital I/Os or 160 analog I/Os
Terminal base	Dedicated TB56xx-2ETH terminal base; TB5600, TB5610 or TB5620 according to communication-module slot requirement
Engineering software	Automation Builder 2.1 or later
Approvals	Official ABB catalog lists CE, UKCA, RCM, cULus and multiple marine type approvals

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Functions

Controller performance

Provides 160 MB user program memory, a 176 MB maximum downloadable application and a 0.5 ms minimum configurable cyclic task.

Motion capability

Supports licensed motion control with a 0.5 ms EtherCAT master cycle and up to 16 synchronized axes listed for a 1 ms task.

Local diagnostics

Integrated display and eight function keys provide local diagnosis and status access.

Interfaces

Dual Ethernet

Two independent Ethernet interfaces use separate MAC addresses or operate as a two-port switch and support standard and licensed industrial protocols.

Serial communication

The configurable RS232/RS485 interface supports ASCII and Modbus RTU Master/Slave communication.

CAN communication

The onboard CAN interface supports CANopen Master, CAN 2A/2B and J1939.

Installation

Terminal base selection

Use only a compatible TB56xx-2ETH terminal base. Select TB5600, TB5610 or TB5620 according to required communication-module slots.

Local expansion

Up to 10 local I/O modules can be connected within the official digital and analog I/O limits.

Connector planning

Provide two RJ45 Ethernet connections, one pluggable serial terminal block and two 5-pole CAN terminal blocks as required.

Compatibility

Engineering environment

Configure and program the CPU with ABB Automation Builder 2.1 or later.

Safety integration

PM5670-2ETH supports AC500-S safety PLC integration and compatible SM560-S safety modules.

Protocol licensing

Verify licenses for Ethernet/IP, IEC 61850, BACnet, KNX IP and other licensed functions before procurement.

FAQ

Q1. How can the quoted unit be verified as the exact PM5670-2ETH?

Match PM5670-2ETH and ABB order code 1SAP151000R0378 across the quotation, nameplate and packing label. Verify the 160 MB memory and dual-Ethernet, serial and CAN interface configuration.

Q2. How can New, Used and Refurbished PM5670-2ETH units be distinguished?

Request current photos of the label, housing, display, keys, RJ45 ports, serial and CAN terminals, terminal contacts and packaging. A New unit should show no mounting, wiring or connector wear, with condition documented in writing.

Q3. How should the supplier be checked before purchasing PM5670-2ETH?

Verify legal registration, physical address, company payment account, written quotation, return terms and traceable references. All records should consistently show PM5670-2ETH and 1SAP151000R0378.

Q4. Which engineering specifications require confirmation?

Check the 24 V DC supply, 67.5 x 76 x 62 mm dimensions, 0.134 kg weight, 160 MB user program memory, TB56xx-2ETH requirement, Automation Builder version, dual Ethernet, RS232/RS485 and CAN requirements.

Q5. What evidence should be requested before payment?

Request timestamped photos or video showing PM5670-2ETH, order code 1SAP151000R0378, serial number, display, keys, all interfaces, terminal contacts, housing and sealed packaging.

Q6. Can PM5650-2ETH, PM5675-2ETH or an -XC version replace PM5670-2ETH?

Not automatically. Memory, flash storage, processor performance, motion capacity and environmental design may differ. Approve substitution only after the complete code and every electrical, mechanical, interface and software requirement are checked.

Recommend Models

Randomly selected industrial automation models

04410580	2CDG 110 024 R0011	D-67722, MX-SM-D51-PW
CKR-93S CKR83S/93S	H4D2F1X	MP2O3HCGL
820BA231	ABB 1SDA054871R1 KT5S7	ZA10341
SXWUI16XX10001 SXWTBIOW110001	PM9C 15198BAGHE12223AA	Ex1s08ER
GX100MG	EXR102F001 B1322	485OPDR RS485
ABB BEA16-4 1SBN081306T1000	LG9	PW9020
171CCC78010	EPD301 PX3DXX01-S6	Mri-M500S
AKB331-M015	CA10-A250	SSA61EP
1757-SRM	STP100-200	HEN04102 H.264
MCS40A0015-5A3-4-00	ABB HS/S3.1 GHQ6050063R0001	152100 901
AV3105	NB2-P36R3-AC/Z005	FP2-8-24
ABB TA200DU-150,1SAZ421201R1004	ABB 11MRK000 660-AN	ABB 6220-0-0117 SU-F-1.0.1
D1082DMDAF2, 16089412.SGDM	DM4T 4940275	025-30889-000
SAVS48EU3	4001A	RTV24G
SEM1700	MBC5100	C2IR-8
ABB RD3P-48	PB21A30004000	JCB-PS10
pcb3724030	DDM-163	PFD-402-25
AFP0430T01 FPO-RTD6T01	ME3011C	kfd0-rsh-1.4s.ps2
INT-1630-L-1-M-110	PP-100-W	HWIC-4SHDSL-E
ITEM3-2000U8000	mt3025 POL965.00	VC180