ALL PRODUCTS

Allen-Bradley ControlLogix-XT 1756 1756-RM2XT Extended Temperature Redundancy Module | Original New

Allen-Bradley ControlLogix-XT 1756 1756-RM2XT Extended Temperature Redundancy Module | Original New

Allen-Bradley ControlLogix-XT 1756 Extended Temperature Redundancy Module

Complete Model

1756-RM2XT

Official Product Description

Allen-Bradley 1756-RM2XT ControlLogix-XT redundancy module with two 1000 Mbps fiber-optic channels and an extended -25 to +70 degree C operating range.

CORE FEATURE: Dual 1000 Mbps fiber redundancy channels with ControlLogix-XT extended-temperature operation.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

allen bradley controllogix xt 1756 1756 rm2xt extended temperature redundancy module original new-1

Overview
Technical Data
Inquiry
Features
Interfaces
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

1756-RM2XT is the Allen-Bradley ControlLogix-XT enhanced redundancy module for synchronized primary and secondary XT chassis.

Rockwell Automation specifies two fiber-optic channels, 1000 Mbps operation and compatible singlemode 1756-RMC1, 1756-RMC3 and 1756-RMC10 redundancy cables.

Unlike 1756-RM2, this catalog number is designed for the ControlLogix-XT chassis and operates from -25 to +70 degrees C when the complete system meets the XT ratings.

Technical Data

Complete model	1756-RM2XT
Brand	Allen-Bradley / Rockwell Automation
Product family	ControlLogix-XT 1756
Product type	Extended-temperature enhanced redundancy module
Lifecycle status	Active Mature
Redundancy channels	2 fiber-optic channels
Signal type	Fiber optic input and output
Channel rate	1000 Mbps
Connector cables	1756-RMC1, 1 m; 1756-RMC3, 3 m; 1756-RMC10, 10 m
Current draw at 5.1 VDC	1.16 A
Current draw at 24 VDC	3.4 mA
Power dissipation	6 W maximum
Thermal dissipation	21 BTU/hr
Dimensions	Numeric dimensions are not stated in official publication 1756-TD001W; ControlLogix-XT single-slot module
Weight	Approximately 0.29 kg (0.64 lb)
Slot width	One ControlLogix-XT chassis slot
Module location	Chassis-based, any slot
Compatible chassis	1756-A7XT and 1756-A10XT
Supported controller families	ControlLogix 5570 and ControlLogix 5580
Standard power supplies	1756-PAXT and 1756-PBXT
Redundant power supply	None listed for the XT configuration
Enclosure type	None, open-style equipment
Temperature code	T4
Operating temperature	-25 to +70 degrees C
Storage temperature	-40 to +85 degrees C
Relative humidity	5 to 95 percent, noncondensing
Certifications	CE, RCM, cULus, ATEX, IECEx, UKEx, UKCA, KC and CCC when marked
Official sources	Rockwell Automation 1756-RM2XT product page; publication 1756-TD001W-EN-P pages 87 to 89; publication 1756-IN087C-EN-P pages 5 to 9

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Features

ControlLogix-XT design

The module is specified for compatible ControlLogix-XT chassis, power supplies and controller combinations.

Extended temperature range

The official operating range is -25 to +70 degrees C for a correctly rated XT system.

Dual fiber channels

Two 1000 Mbps redundancy channels allow an optional second fiber path for higher availability.

Matched-chassis synchronization

The module synchronizes matched primary and secondary chassis in a validated redundancy configuration.

Interfaces

Channel 1	Connect a compatible singlemode 1756-RMC fiber-optic cable between the matched 1756-RM2XT modules.
Channel 2	Install an optional second compatible fiber-optic cable for redundant fiber media.
Supported cables	Use 1756-RMC1, 1756-RMC3 or 1756-RMC10 according to the required chassis separation.
Backplane interface	Install the module in one slot of a compatible XT chassis and include 1.16 A at 5.1 VDC in the power budget.

Installation

01 - Verify the exact XT catalog number

Match 1756-RM2XT on both module labels, quotations, packaging and Rockwell Automation product records.

02 - Use an XT chassis pair

Install the modules only in compatible 1756-A7XT or 1756-A10XT chassis with the specified XT power supplies.

03 - Match both chassis

Primary and secondary chassis components, slot positions, controller families and compatible firmware must match.

04 - Connect fiber channels

Connect an approved 1756-RMC cable to channel 1 and, when required, a second approved cable to channel 2.

05 - Qualify the redundancy system

Verify firmware, RMCT compatibility, chassis synchronization, temperature ratings and qualified redundancy status before service.

Environment

Operating temperature

-25 to +70 degrees C for the correctly rated ControlLogix-XT system.

Storage temperature

-40 to +85 degrees C.

Relative humidity

5 to 95 percent, noncondensing.

Protection

Open-style equipment; install it in a suitable industrial enclosure.

Laser safety

The fiber-optic system is a Class 1 laser product; installation and service must follow the official safety instructions.

System derating

If any chassis component has a lower environmental rating, the complete system is limited to the lowest rating.

FAQ

Q1. How can the exact quoted 1756-RM2XT be verified?

Match 1756-RM2XT on the quotation, both module labels and packaging. Confirm the XT suffix, two fiber channels, XT chassis requirement, -25 to +70 degree C range and one-slot format.

Q2. How can New, Used or Refurbished condition be distinguished?

Request date-marked photos of the full label, serial and series markings, both fiber channels, SFP areas, indicators, backplane connector and housing. Check for fiber-port contamination, latch wear, altered labels and previous chassis marks.

Q3. How should supplier legality and reliability be checked?

Verify the supplier legal entity, registered address, invoice details, payment beneficiary and traceable contact. The offer must state Allen-Bradley 1756-RM2XT, condition, series, quantity and included fiber cables.

Q4. Which specifications must engineering confirm before purchase?

Confirm XT chassis and power supplies, both chassis configurations, controller family, firmware bundle, RMCT version, 1000 Mbps fiber channels, cable length, backplane power and environmental ratings.

Q5. What physical evidence should be requested before payment?

Ask for one date-marked photo set showing both 1756-RM2XT labels, XT suffixes, serial and series markings, both channel ports, status indicators, backplane connectors, packaging and included 1756-RMC cables.

Q6. Can standard 1756-RM2 replace 1756-RM2XT?

Not automatically. 1756-RM2 is specified for standard ControlLogix chassis and a 0 to 60 degree C range, while 1756-RM2XT requires XT chassis and power components and supports -25 to +70 degrees C. Validate the complete system before substitution.

Recommend Models

ABB 2TLA0200051R5100	GE 0173B4772G001	MK2PN-S
LC1D25 LRD16	SL1-F	TM8
8002-025/K050-0613/000-6900	JFD-2000A	CC-PCNT02 PN:51454551-275
GE CR2810A14DE	NSYTRAC22	TB17
ABB NCG-1002B	2190-E22PA	85-15-2135
PMK-JY-M	ADA-8XR	123T
R-270	NBN15-F11-E2	NGCMA10AX01M
505-4532	IC330-18S	SMC-35
1746-IV16	LC1D09	1610-T0002N125
ABB REC670 1MRK002814-AC	UDS1UB1A30HZ142	VB2-SP3 U2-12907
JUE-87 NQE-3222,NTF-318	700-BX640A1	RXE2N0F7H132A
BS08A-RD 3PDD1 Y381411	RNMG-64	880PL-10mA-A
SOMERO SSR2	CKR-200-BKT	2109 IMx-M 102E
505-4816 TI505	M061-FC08	2604600B33MA
05423300	2000-5420/1399-987	ABB 3BHE009681R0101 GVC750BE101 3BHB013088R0001 5SHY3545L0010
WO-5718L-01SD-RO	2206-8033	08056D106KAT2A
A1SX80 16PT	35A-FW-24VAC	KL2012
DPS112	1794-TB3	2190-E42AA
C03A11PQ	FCN-360 BK0-C4127H08	V61R517A-A213JB
D-HC-KA-D	DT60PW240P	0212 A 1/8 FKM SS 00455428