ALL PRODUCTS

Bently Nevada 24701 Series 24701-28-10-25-080-03-02 Stainless Steel Proximity Probe Housing Assembly

Bently Nevada 24701 Series 24701-28-10-25-080-03-02 Stainless Steel Proximity Probe Housing Assembly

BENTLY NEVADA | 24701 SERIES

24701-28-10-25-080-03-02

Stainless Steel Proximity Probe Housing Assembly with 3300 XL 8 mm approval-option probe

CONFIGURATION: 1.0 m probe cable | 2.5 in standoff adapter | 8.0 in penetration | Fitting option 03 | 3/4-14 NPT mounting

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 24701 series 24701 28 10 25 080 03 02 stainless steel proximity probe housing assembly-1

Overview
Technical Data
Inquiry
Construction
Installation
Selection Guide
Environment
FAQ
Recommend Models
Recommended Products

Bently Nevada 24701 Stainless Steel Proximity Probe Housing Assembly

Exact configured model: 24701-28-10-25-080-03-02

Official product identity

The 24701 is an all-metal assembly for externally mounting a proximity probe. This configuration uses the 303 stainless steel body and 304 stainless steel sleeve with a 3300 XL 8 mm probe carrying the approval option and a 1.0 m cable.

Configured geometry

The 2.5 in standoff adapter and 8.0 in probe penetration produce a configured C + D dimension of 10.5 in (266.7 mm). Fixed references are A 78.2 mm, B 151.9 mm and E 27.9 mm.

Connection package

Option E:03 includes one 3/4-14 NPT plug, one 3/4-14 to 1/2-14 NPT reducer and one cable seal grip with three grommet ranges. Option F:02 provides the 3/4-14 NPT mounting thread.

Installation focus

Mount through the 2.5 in standoff, set the 8.0 in penetration and maintain probe clearance. The 10.5 in combined C + D dimension is below the 12 in threshold that requires added sleeve support.

Procurement check

Match every segment of 24701-28-10-25-080-03-02. The approval-option probe, 1.0 m cable, standoff, penetration, fitting kit and mounting thread must all match; the stainless 24701 body is not equivalent to the aluminum 21000 body.

Technical Data

Official configuration and specifications

Complete model	24701-28-10-25-080-03-02
Product family	Bently Nevada 24701 Series
Product type	Stainless steel proximity probe housing assembly
Probe	3300 XL 8 mm probe with approval option (option 28)
Probe cable length	1.0 m (39 in)
Standoff adapter	2.5 in (63.5 mm), option 25
Probe penetration	8.0 in (203.2 mm), option 080
Fittings	One 3/4-14 NPT plug; one 3/4-14 to 1/2-14 NPT reducer; cable seal grip with grommets
Mounting thread	3/4-14 NPT
Material	303 stainless steel body with 304 stainless steel sleeve
Dimensions	A 78.2 mm (3.08 in); B 151.9 mm (5.97 in); E 27.9 mm (1.10 in); configured C + D 266.7 mm (10.5 in)
Weight	1.8 kg (4.1 lb) typical, without fittings
Probe temperature	-51 to +177 °C (-60 to +351 °F), operating and storage
Compliance	RoHS Directive 2011/65/EU
Official document	Datasheet 141600 Rev. AC, pages 1–4, 6–8, 17 and 19

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Construction

Stainless steel body

The 24701 housing body uses 303 stainless steel and the probe sleeve uses 304 stainless steel, providing an all-metal external probe mounting assembly.

Internal assembly

The housing includes a threaded dome cover, conduit ports, probe sleeve, O-rings, reverse-mount probe and thread seal.

Configured probe

Option A:28 specifies a 3300 XL 8 mm probe with the approval option. Option B:10 specifies the 1.0 m probe cable.

Standoff and fittings

The 2.5 in standoff works with the 3/4-14 NPT mounting thread. Option 03 supplies the plug, reducer and cable seal grip.

Installation

Mounting interface

Use the 3/4-14 NPT mounting thread and 2.5 in standoff adapter. Verify adequate thread engagement and machine-case support before positioning the probe.

Configured reach

Set the 8.0 in penetration so C + D equals 10.5 in. Maintain clearance from nearby metal to avoid probe side-view or rear-view effects.

Sleeve support

The configured 10.5 in C + D dimension is below the datasheet threshold. Additional support is required when C + D exceeds 12 in.

Cable and sealing

Route the 1.0 m lead without strain, install the reducer and seal grip for the selected cable size, then close unused conduit entry with the supplied plug.

Selection Guide

24701

303 stainless steel housing with 304 stainless steel sleeve.

28 | Probe

3300 XL 8 mm probe with approval option.

10 | Cable

1.0 m (39 in) probe cable.

25 | Standoff

2.5 in (63.5 mm) standoff adapter.

080 | Penetration

8.0 in (203.2 mm) probe penetration.

03 | Fittings

NPT plug, reducer and cable seal grip with three grommet ranges.

02 | Mounting thread

3/4-14 NPT mounting thread.

Environment

Temperature

The configured 3300 XL 8 mm probe is specified for -51 to +177 °C operating and storage temperature.

Mass and materials

Typical 24701 mass is 1.8 kg without fittings. The body is 303 stainless steel and the sleeve is 304 stainless steel.

Compliance

The official datasheet lists RoHS Directive 2011/65/EU compliance.

Approval distinction

The A:28 code selects the probe approval option. Explosion-proof CSA housing ratings apply to CA24701 versions with specified fitting options, not automatically to this plain 24701 order code.

FAQ

Q1. How is the exact stainless steel configuration verified?

Match 24701-28-10-25-080-03-02 across the quotation, housing label and packing evidence. Decode the approval-option probe, 1.0 m cable, 2.5 in standoff, 8.0 in penetration, option 03 fittings and 3/4-14 NPT thread.

Q2. What signs indicate Used or Refurbished condition?

Inspect dated images of the 303 stainless body, dome threads, 304 sleeve, standoff, probe tip, cable and fittings. Scratches, wrench marks, sealant, thread damage, cable discoloration or altered labels may indicate prior service.

Q3. How should a buyer validate the supplier?

Check the legal entity, physical address, bank beneficiary and traceable communication. Require item-specific photos and compare all suffixes with Bently Nevada datasheet 141600 Rev. AC.

Q4. What must engineering review before purchase?

Confirm the 10.5 in combined geometry, 3/4-14 NPT interface, 1.0 m cable reach, approval-option probe, target gap, conduit sealing and the stainless housing material requirement.

Q5. What evidence is needed before payment?

Request a continuous video or dated photo set showing the full model label, housing body, 2.5 in standoff, 8.0 in configured reach, probe, connector, lead and complete option 03 fitting package.

Q6. Can a 21000 or CA24701 replace this model?

Not by suffix similarity alone. The 21000 changes body material and reference dimensions; CA24701 changes certification identity. Every option, dimension and approval must be reviewed.

Recommend Models

60 randomly selected industrial automation models

PM554-TP-ETH	X-CPU 01	Yokogawa ADV151-E60/D5A00
VersaMax CPU IC200CPUE05	5466-315	1C31122G02/1C31125G2
16 ACS580-01-206A-4	Siemens 6ES7522-1BH10-0AA0	TDM4.1-020-300-W0
IMDSO14	X20SI4100	5466-1245
IC695CPU315	ABB SD833	ProSoft RLX2-IHNF-A
3HAC023020-003	X20AI2622	6 ACS355-03E-15A6-4
2711R-T4T	HCS01.1E-W0008-A-03-B-ET-EC-NN-L4-NN-FW	80190-220-01-R
ProSoft MVI69E-MBS	Yokogawa AAI143-H50/K4A00	IC755CSS10CDA
SS4303T01	Emerson A6120	160-BA04NSF1
IEMMU01	1769-L23E-QBFC1B	80190-100-01-R
HDS03.2-W100N-HS32-01-FW	P0914TN	3HAC057544-006
T8461C	CC-PDIH01	RH928CY
TRICONEX 3623	Tricon 3008	CC-PCNT02
DKC03.1-040-7-FW	T8451C	22B-D6P0N104
FC-UGAO01	Siemens 6ES7513-1RL00-0AB0	KJ3241X1-EA1
FCM2F4	FBM246	EPRO MMS6312
CMC16 200-530-022-014	IOCN 200-566-101-012	DS200TCTSG1A
Yokogawa ATD5A	8EI2X2HWD10.0600-1	Yokogawa S2MMM843-SS1130
1761-L32BWA	F3 DIO 20/8 02	MPC4 200-510-074-113
MPC4 200-510-076-114	DS200LDCCH1A	X-PS 01