ALL PRODUCTS

Bently Nevada 3300 XL 330102-00-12-10-01-05 8 mm Armored Proximity Probe | Original New

Bently Nevada 3300 XL 330102-00-12-10-01-05 8 mm Armored Proximity Probe | Original New

BENTLY NEVADA | 3300 XL 8 mm

330102-00-12-10-01-05

3300 XL 8 mm proximity probe, 3/8-24 UNF, with armor, 1.2 in case, 1.0 m cable

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 3300 xl 330102 00 12 10 01 05 armored proximity probe original new-1

Overview
Technical Data
Inquiry
Applications
Ordering Code
Installation
Environment
FAQ
Recommend Models
Recommended Products

OFFICIAL PRODUCT SUMMARY

Compact 1.2 in armored probe with protected ClickLoc connector

Technical Data

Exact model specification

Complete model	330102-00-12-10-01-05
Product family	3300 XL 8 mm Proximity Transducer System
Product type	Standard-mount 8 mm proximity probe with armor
Dimensions	8.0 mm (0.31 in) tip; 0.0 in unthreaded length; 1.2 in (30.5 mm) case; 1.0 m (3.3 ft) total length, +30% / -0%; armor OD 7.67 mm; ferrule 9.5 mm maximum
Weight	323 g/m (11.4 oz), official typical probe weight
Mounting thread	3/8-24 UNF-2A; maximum thread engagement 0.563 in
Cable and armor	75 ohm FEP-insulated standard probe cable; AISI 302 or 304 stainless-steel armor with FEP jacket
Connector	Miniature ClickLoc coaxial connector with protector; protected assembly 12.4 mm maximum OD
Probe DC resistance	7.59 +/- 0.50 ohms for 1.0 m
Operating / storage	-52 C to +177 C (-62 F to +350 F)
Matched-system range	2 mm (80 mil) linear range; 7.87 V/mm (200 mV/mil) scale factor
Frequency response	0 to 10 kHz, +0 / -3 dB
Certifications	Order-code option 05: CSA, ATEX and IECEx approvals

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications

Product-specific functions and use

Compact mounting

The 1.2 in case supports short-depth 3/8-24 UNF mounting arrangements.

Radial vibration

Measures shaft vibration without contact when used with the matched 3300 XL system.

Axial position

Supports static shaft-position and thrust-position monitoring.

Protected connector

The option 01 protector shields the ClickLoc connection in routed installations.

Ordering Code

330102-00-12-10-01-05

330102	8 mm probe, 3/8-24 UNF thread, with armor
00	0.0 in unthreaded length
12	1.2 in overall case length
10	1.0 m total probe length
01	ClickLoc connector with protector, standard cable
05	CSA, ATEX and IECEx approvals

Installation

Key installation checks

Mounting depth

Verify that the 30.5 mm case and 0.0 in unthreaded length suit the mounting bracket or machine case.

Threading

Use a matching 3/8-24 UNF hole and do not exceed 0.563 in thread engagement.

Connector clearance

Allow clearance for the protected connector assembly, up to 12.4 mm OD and 51.1 mm length.

Environment

Materials, limits and compliance

Probe temperature	-52 C to +177 C (-62 F to +350 F)
Case material	AISI 303 or 304 stainless steel
Armor	AISI 302 or 304 stainless steel with FEP outer jacket
Approvals	CSA, ATEX and IECEx option

FAQ

Six model-specific procurement and engineering questions

Q1. How can the exact quoted probe be verified?

Match the full code 330102-00-12-10-01-05. The 12 code is a 1.2 in case and 01 is a protected ClickLoc connector, both essential selection details.

Q2. How can New, Used and Refurbished condition be distinguished?

Request close photos of the tip, threads, compact case, armor and connector protector. New stock should have no tip scoring, thread wear, armor damage or connector marks.

Q3. How can the supplier be verified?

Check the legal company identity, address, traceable contacts and return terms, and require the quote and packaging photos to show the complete part number.

Q4. What must engineers verify before ordering?

Confirm the 30.5 mm case fits the mounting depth, 3/8-24 thread engagement stays within 0.563 in, and the protected connector has adequate routing clearance.

Q5. What physical evidence should be requested before payment?

Ask for timestamped photos of the full probe, readable label, 8 mm tip, threads, 1.2 in case measurement, armor and connector protector, plus packaging.

Q6. Can the 01 connector code be replaced by 02?

Not automatically. Code 01 includes a connector protector and changes the connector envelope, while 02 does not; engineering must approve any change.

Recommend Models

60 independent random model references

XTL-230-32	W1-S35	effector200 OG5121
GE IC200MDL940A	025-29583-001	JPSU-920-AC-AFO
W1-A35S B911744	1756-IB16D	PXC3.E72 S55376-C100
DVC6200 GE54203X072G	ICU2001 H132712-LAN6	K910B
L5504D2A	SXWAO8XXX10001 AO-8	NBG-12LX
713-5U	DM01D01ACC	2641005WD11A1C DPT2641-005D-1
MIS-PE 752-138	P50099086	701 / pn :40501460
ABB CM577-ETH-XC 1SAP370700R0001	SS-4BHT-72	STA4D-10 C3TB01202J
C005-M-E2	2cdg 110095 R0011	OP30HONR
SB-RLY12c10A-DN	34.51.7.024.0010	A51 6762250 AE4 6762264 AE02
7NG1901-4AD30-8	CRT341	RDC485FO-DV-2P-ST-C
EPX-41D4CH	6ES7360-3AA01-0AA0	ABB XT387E XT387B GKWE 702750
MNL-13RF2	FC-7M-F	IQE35-1201U80035
SEL-3094 30940CBXX	APX 740	CA44 CA54
CC-PAOH01 51405039-175	WKP-4	STA4D-10
QUINT-PS-100-240AC/24DC/5	3256-50	08701531/888-23
ABB 926 115-AN	Spinner 01 Bn 766436	760ATC
SPCE652.000	ABB 0768458	HDL-MSD04T.40
LPS-4XWGA	JL085A JL085-61002	5920501
Brady 76716	6128-866-101	750-431