ALL PRODUCTS

Bently Nevada 3300 XL 8 mm 330104-00-05-10-11-05 Armored FluidLoc Proximity Probe

Bently Nevada 3300 XL 8 mm 330104-00-05-10-11-05 Armored FluidLoc Proximity Probe

Bently Nevada 3300 XL 8 mm Armored FluidLoc Proximity Probe

Complete Model

330104-00-05-10-11-05

Official Product Description

Bently Nevada 330104-00-05-10-11-05 metric 3300 XL 8 mm armored proximity probe with M10x1 thread, 0 mm unthreaded length, 50 mm case, 1.0 m FluidLoc cable, protected ClickLoc connector and approvals.

CORE FEATURE: One-metre armored M10x1 proximity probe with FluidLoc cable and approved protected connection.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 3300 xl 8 mm 330104 00 05 10 11 05 armored fluidloc proximity probe-1

Overview
Technical Data
Inquiry
Applications & Features
Connections
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

330104-00-05-10-11-05 is a metric Bently Nevada 3300 XL 8 mm proximity probe with an M10x1 case thread and stainless-steel armor.

The complete code specifies 0 mm unthreaded length, 50 mm overall case length, 1.0 m total length, a protected miniature coaxial ClickLoc connector, FluidLoc cable and CSA, ATEX and IECEx approvals.

When used in a matched 3300 XL 8 mm transducer system, the published linear range is 2.0 mm and the nominal scale factor is 7.87 V/mm.

Technical Data

Complete model	330104-00-05-10-11-05
Brand	Bently Nevada
Product family	3300 XL 8 mm Proximity Transducer System
Product type	Metric armored proximity probe
Probe thread	M10x1
Unthreaded length	0 mm
Overall case length	50 mm
Total length	1.0 m (3.3 ft)
Connector and cable	Miniature coaxial ClickLoc connector with connector protector and FluidLoc cable
Armor	Flexible AISI 302 or 304 stainless steel with FEP outer jacket
Probe dc resistance	7.59 plus or minus 0.50 ohm for the 1.0 m probe
Linear range	2.0 mm (80 mils), approximately 0.25 to 2.3 mm from the target
Recommended gap	1.27 mm (50 mils) for published system specifications
Scale factor	7.87 V/mm (200 mV/mil) nominal
System power	-17.5 to -26 Vdc, 12 mA maximum at the Proximitor Sensor
Probe materials	PPS tip and AISI 303 or 304 stainless-steel case
Operating temperature	-52 to +177 degrees C for the standard probe
Storage temperature	-52 to +177 degrees C for the standard probe
Minimum cable bend radius	25.4 mm (1.0 in)
Maximum thread engagement	15 mm for M10x1
Recommended probe-case torque	11.2 N m; 7.5 N m when only the first three threads are engaged
Agency approval option	05 - CSA, ATEX and IECEx approvals
Dimensions	8.0 mm probe-tip diameter; 0 mm unthreaded length; 50 mm case; 1.0 m total length; cable 3.94 mm outside diameter for FluidLoc; armor 7.67 mm outside diameter; connector 7.24 mm outside diameter
Weight	Published typical probe weight is 323 g/m; the official datasheet does not state a separate exact assembled weight for this complete configuration
Official source	Baker Hughes Bently Nevada datasheet 141194 Rev. AN, pages 1, 3-13 and 35

Complete model	330104-00-05-10-11-05
Brand	Bently Nevada
Product family	3300 XL 8 mm Proximity Transducer System
Product type	Metric armored proximity probe
Probe thread	M10x1
Unthreaded length	0 mm
Overall case length	50 mm
Total length	1.0 m (3.3 ft)
Connector and cable	Miniature coaxial ClickLoc connector with connector protector and FluidLoc cable
Armor	Flexible AISI 302 or 304 stainless steel with FEP outer jacket
Probe dc resistance	7.59 plus or minus 0.50 ohm for the 1.0 m probe
Linear range	2.0 mm (80 mils), approximately 0.25 to 2.3 mm from the target
Recommended gap	1.27 mm (50 mils) for published system specifications
Scale factor	7.87 V/mm (200 mV/mil) nominal
System power	-17.5 to -26 Vdc, 12 mA maximum at the Proximitor Sensor
Probe materials	PPS tip and AISI 303 or 304 stainless-steel case
Operating temperature	-52 to +177 degrees C for the standard probe
Storage temperature	-52 to +177 degrees C for the standard probe
Minimum cable bend radius	25.4 mm (1.0 in)
Maximum thread engagement	15 mm for M10x1
Recommended probe-case torque	11.2 N m; 7.5 N m when only the first three threads are engaged
Agency approval option	05 - CSA, ATEX and IECEx approvals
Dimensions	8.0 mm probe-tip diameter; 0 mm unthreaded length; 50 mm case; 1.0 m total length; cable 3.94 mm outside diameter for FluidLoc; armor 7.67 mm outside diameter; connector 7.24 mm outside diameter
Weight	Published typical probe weight is 323 g/m; the official datasheet does not state a separate exact assembled weight for this complete configuration
Official source	Baker Hughes Bently Nevada datasheet 141194 Rev. AN, pages 1, 3-13 and 35

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

Armored lead

Flexible stainless-steel armor protects the one-metre probe lead from mechanical damage.

FluidLoc cable

The selected FluidLoc construction limits fluid migration through the probe cable.

Protected ClickLoc

Option 11 combines the miniature ClickLoc connector with its connector protector.

Metric mounting

The M10x1 case provides the published metric mounting configuration.

Connections

Probe connector	Miniature coaxial ClickLoc connector with connector protector
Probe cable	FluidLoc 75 ohm triaxial cable, 1.0 m total probe length
Mechanical protection	Flexible stainless-steel armor with FEP outer jacket
Electronics	Use with a matched 3300 XL 8 mm Proximitor Sensor system
One-metre system	A one-metre system uses the probe without an extension cable

Installation

01 - Verify the complete code

Match 330104-00-05-10-11-05 on the quotation, probe label, packaging and order record.

02 - Prepare the mounting

Provide an M10x1 mounting thread and keep thread engagement at or below the published 15 mm maximum.

03 - Apply correct torque

Use 11.2 N m for normal engagement or 7.5 N m when only the first three threads are engaged.

04 - Set the measurement gap

Establish the published 1.27 mm reference gap and verify the matched-system output before commissioning.

05 - Route the armored lead

Maintain at least 25.4 mm bend radius and prevent crushing, twisting or over-tensioning of the armor.

Environment

Temperature

Standard probe operating and storage range is -52 to +177 degrees C.

Low-temperature caution

Exposure below -34 degrees C may cause premature failure of the pressure seal.

Probe materials

PPS sensing tip with an AISI 303 or 304 stainless-steel case.

Armor material

Flexible AISI 302 or 304 stainless steel with an FEP outer jacket.

Pressure sealing

A Viton O-ring seals differential pressure; probes are not pressure-tested before shipment.

Approvals

Suffix 05 specifies CSA, ATEX and IECEx approvals.

FAQ

Q1. How can the exact quoted 330104-00-05-10-11-05 be verified?

Match the full code on the quotation, label and packaging. Confirm the M10x1 thread, armor, 0 mm unthreaded length, 50 mm case, 1.0 m FluidLoc cable, protected ClickLoc connector and 05 approval suffix.

Q2. How can New, Used or Refurbished condition be distinguished?

Request current date-marked photos of the 8 mm tip, M10x1 thread, 50 mm case, full armored lead, connector protector and label. Check for thread wear, crushed armor, repaired cable, contamination or altered labels.

Q3. How should supplier legality and reliability be checked?

Verify the legal entity, registered address, payment beneficiary and traceable contact. The written offer should state Bently Nevada, complete model 330104-00-05-10-11-05, condition, quantity and return terms.

Q4. Which specifications must engineering confirm before purchase?

Confirm the M10x1 thread, 0 mm unthreaded length, 50 mm case, 1.0 m FluidLoc cable, stainless-steel armor, protected ClickLoc connection, 2.0 mm range and matched Proximitor compatibility.

Q5. What physical evidence should be requested before payment?

Ask for dated photos showing the complete label, 8 mm tip, M10x1 case, entire armored lead, protected connector, approval markings and original packaging, plus a measurement of the 1.0 m total length.

Q6. Can another 330104 suffix replace 330104-00-05-10-11-05?

Not automatically. Suffixes change unthreaded length, case length, total length, connector protection, cable type and approvals. Engineering must approve every changed position.

Recommend Models

ZE-Q-2S	031SA4004011Z	VL-690393-1 N16645
NKTU11-14	ZB4BVB3	ABB NBMNAAABNEC1BNN1XF
1285-W	MS4-FRM-FRZ	PRD30-25DN
VFS4300	ST-DI-024-16	IS220PDIOH1B
M061-FC08	KGJP2107 7555GR07	WMZH1C15
5SJ4116-6HG40	HUS723020ALS640	82A-BC-000-TM-DAAP-1DA
B&R X20BM11	30-6M/S90-SP	EX950A-10
TK-E02 TK22EW-X	7SS52 7SS5231-5CA01-0AA1/GG	FCN-360 BK0-C4127H08
OMICRON ,CMC 430	5SY4514-8	42MTB-5004
2116-1291	7SS52 7ss5231-5ca01-1aa1	33102430601
C200H-ID212	BFD71S 765A827G01	RCMT32.5-1A
4XD250B PN:580243	CS7X PC59-00101-07	RXE2N0F7H132A
BOSS50 PL-5 B01-NN	OPDS-MP-0155-I1	Ti300
N72408	C47 1-1/4	RJ45S 860-5M
IC693ALG221B	HBL2310SW	WMZT3D02
743040115	700-HB32Z12	MT31.DK1ADNBX
UM5ACG-H5R	NBN15-F11-E2	GE P112-6053
117442	6ES71936BP200DA0	6779-9091 HD2-DM-B
HC-B 24-EBUS	7500-0006-00000	1275225
T-51 8214	DC60S3-B	AIF01A A03B-0807-C011