+86-18159889985 [email protected]

EN EN
EN EN

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000
bently nevada 3300 xl 8 mm 330180 50 05 5 m panel mount proximitor sensor original new-0

BENTLY NEVADA

Home >  Products >  BENTLY NEVADA

Home > Products BENTLY NEVADA

ALL PRODUCTS

Bently Nevada 3300 XL 8 mm 330180-50-05 5 m Panel-Mount Proximitor Sensor | Original New
Bently Nevada 3300 XL 8 mm 330180-50-05 5 m Panel-Mount Proximitor Sensor | Original New
Bently Nevada 3300 XL 8 mm 330180-50-05 5 m Panel-Mount Proximitor Sensor | Original New
Bently Nevada 3300 XL 8 mm 330180-50-05 5 m Panel-Mount Proximitor Sensor | Original New
Bently Nevada 3300 XL 8 mm 330180-50-05 5 m Panel-Mount Proximitor Sensor | Original New
Bently Nevada 3300 XL 8 mm 330180-50-05 5 m Panel-Mount Proximitor Sensor | Original New
Bently Nevada 3300 XL 8 mm 330180-50-05 5 m Panel-Mount Proximitor Sensor | Original New
Bently Nevada 3300 XL 8 mm 330180-50-05 5 m Panel-Mount Proximitor Sensor | Original New
Bently Nevada 3300 XL 8 mm 330180-50-05 5 m Panel-Mount Proximitor Sensor | Original New
Bently Nevada 3300 XL 8 mm 330180-50-05 5 m Panel-Mount Proximitor Sensor | Original New

Bently Nevada 3300 XL 8 mm 330180-50-05 5 m Panel-Mount Proximitor Sensor | Original New

BENTLY NEVADA - 3300 XL 8 MM
330180-50-05
5 m Panel-Mount Proximitor Sensor
SYSTEM LENGTH
5.0 m
MOUNTING
Panel mount
APPROVAL OPTION
CSA / ATEX / IECEx
LEAD TIME
In stock
WARRANTY
1 year
Appurtenance:
bently nevada 3300 xl 8 mm 330180 50 05 5 m panel mount proximitor sensor original new-1
Inquiry
  • Overview
  • Technical Data
  • Inquiry
  • Applications
  • Construction
  • Performance
  • Compatibility
  • FAQ
  • Recommend Models
  • Recommended Products
BENTLY NEVADA - 3300 XL 8 MM
330180-50-05
5 m Panel-Mount Proximitor Sensor
Product Overview
This Proximitor Sensor conditions the signal from one compatible 3300-series 5 mm or 3300 XL 8 mm probe and extension cable. Ordering option 50 specifies a 5.0 m total transducer system length with the panel-mount base; option 05 specifies CSA, ATEX and IECEx approvals.
SYSTEM LENGTH
5.0 m
MOUNTING
Panel mount
APPROVAL OPTION
CSA / ATEX / IECEx
Configuration Control
Use the complete ordering number for quotation and installation review. Verify every length, mounting, cable, connector and approval option against the official documentation before substitution.

Technical Data

SPECIFICATION
OFFICIAL VALUE
Complete model
330180-50-05
Product family
3300 XL 8 mm Proximity Transducer System
Product type
Proximitor Sensor
System length
5.0 m (16.4 ft)
Mounting
Panel mount, 4-hole base
Dimensions
81.3 x 61.0 x 63.5 mm maximum panel-mount envelope
Weight
246 g (8.67 oz)
Sensor input
One non-contacting 3300-series 5 mm or 3300 XL 8 mm probe and extension cable
Supply voltage
-17.5 to -26 Vdc; -23 to -26 Vdc with barriers
Current consumption
12 mA maximum
Output resistance
50 ohm
Linear range
2 mm (80 mils), approximately 0.25 to 2.3 mm
Incremental scale factor
7.87 V/mm (200 mV/mil), +/-5% including interchangeability error
Deviation from best-fit straight line
Less than +/-0.025 mm (+/-1 mil)
Frequency response
0 to 10 kHz, +0/-3 dB
Housing material
A308 aluminum
Operating temperature
-52 to +100 deg C
Storage temperature
-52 to +105 deg C
Approvals option
CSA, ATEX and IECEx

Applications

The configuration of 330180-50-05 is intended for the following documented system roles and installation conditions.
RADIAL VIBRATION
Conditions static and dynamic displacement signals from a matched 3300 XL probe system.
SHAFT POSITION
Supports position and gap measurements within the documented 2 mm linear range.
MACHINE PROTECTION
Interfaces the transducer system with compatible Bently Nevada monitoring channels.
PANEL INSTALLATION
Panel-mount packaging for a matched 5 m system.

Construction

CONFIGURATION ELEMENTS
1A308 aluminum Proximitor Sensor housing with isolated panel-mount base.
2Four-hole panel footprint compatible with previous 3300 Proximitor Sensor mounting when the specified base is used.
3Probe and extension-cable input connector plus field-wiring terminals for power, common and output.
4Panel envelope shown in the official drawing: 81.3 x 61.0 x 63.5 mm maximum.

Performance

SYSTEM CALIBRATION
5 m matched transducer system
SCALE FACTOR
7.87 V/mm (200 mV/mil), +/-5% including interchangeability error
LINEARITY
Less than +/-0.025 mm (+/-1 mil)
BANDWIDTH
0 to 10 kHz, +0/-3 dB
POWER
-17.5 to -26 Vdc at 12 mA maximum
ENVIRONMENT
-52 to +100 deg C operating

Compatibility

SYSTEM MATCHING CHECKLIST
01The probe length plus extension-cable length must equal the 5.0 m total system length specified by 330180-50-05.
02Use only documented 3300-series 5 mm or 3300 XL 8 mm components when published interchangeability and accuracy are required.
03The -50 mounting option is panel mount. DIN-mount and no-hardware variants use different ordering codes and are not automatic substitutes.
04Option 05 identifies the approval configuration; preserve the complete suffix when matching hazardous-area documentation.

FAQ

Q1How can I verify that the quotation is for 330180-50-05?
Check the complete nameplate and quotation. The first option must identify a 5.0 m system with panel mounting, and suffix 05 must identify the CSA, ATEX and IECEx approval configuration.
Q2How can I distinguish new, used and refurbished 330180-50-05 units?
Request current photos of the nameplate, terminals, probe-input connector, panel-mount base and factory packaging. A new unit should not show terminal marks, corrosion, rewiring residue or mounting wear.
Q3How can I assess whether a supplier is legitimate and reliable?
Ask the supplier to cite Baker Hughes datasheet 141194 Rev. AN, show the complete part number, provide traceable commercial documents and confirm that the offered mounting and approval codes match 330180-50-05.
Q4What should an engineer confirm before purchasing 330180-50-05?
Confirm the 5.0 m total system length, panel-mount footprint, compatible probe and extension-cable combination, -17.5 to -26 Vdc supply range, 12 mA maximum current and required approval documentation.
Q5What physical evidence should be requested before payment?
Request clear photos of the full nameplate, terminals, connector, four-hole mounting base, packaging labels and any serial or lot identifiers, with the quoted 330180-50-05 visible in the same evidence set.
Q6Can a similar 330180 suffix replace 330180-50-05?
Not automatically. -51 and -52 are different mounting variants; -90 selects a 9 m system, so calibration length or mounting hardware changes. Any replacement must preserve total system length, mounting method and approval option.

Recommend Models

RECOMMEND MODEL
369B1860G0030
5X00225G01
EJA430E-JAS4J-917EA
SPIET800
V18345-101U46100N
DSI22
BRC410
KL2101X1-BB1
T5L12-3000
369B1851G0
369B1842G500
VE5126
INNIS11
V18345-302712000ZZ
BRC400
SE4001S2T2B5
EJA530E-JBS4N
369B1848G
AAI543-S50
5X00034G01
HFZ25
1C31223G01
5X00226G02
mai51
SPBRC410
3051CD2A22A
5X00501G01
KC3020X1-BA2
369B1841G0130
3051GP3A2B21AB4M5HR5
KJ3241X1-BK1
VE5129
NTHS03
369B1860G0016
5X00070G04
IIT13
2SY7010-1LB14
KJ2005X1-BK1
VE3008
OC6000
KJ4006X1-BF1
EJA110E-JMS
1C31194G03
EJA530-JCS4N
V18345-101521001
SE4603T05
3051CD3A
KJ4001X1-CB1
EJA210E-JMS4G-919E
5X00226G
VE5010
KJ4002X1-BF2
KJ3224X1-BK1
SPDSO14
IMDSM04
1C31189G03
KJ3221X1-BK1
EJA120E-JES5J-917DB
1C31234G01
SPSET01

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000