ALL PRODUCTS

Bently Nevada 3300 XL 8 mm 330192-00-25-50-00 Extended Temperature Range Armored Proximity Probe

Bently Nevada 3300 XL 8 mm 330192-00-25-50-00 Extended Temperature Range Armored Proximity Probe

Bently Nevada 3300 XL 8 mm Extended Temperature Range Armored Proximity Probe

Complete Model

330192-00-25-50-00

Official Product Description

Bently Nevada 330192-00-25-50-00 3300 XL 8 mm extended temperature range proximity probe with 3/8-24 UNF thread, armor, 0.0 in unthreaded length, 2.5 in case length and 5.0 m total length.

CORE FEATURE: Armored 8 mm ETR probe designed for probe and extension cable temperatures from -35 to +260 degrees C.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Overview
Technical Data
Inquiry
Applications & Features
Connections
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

330192-00-25-50-00 is a Bently Nevada 3300 XL 8 mm extended temperature range proximity probe with a 3/8-24 UNF thread and protective armor.

The complete ordering code specifies 0.0 in unthreaded length, 2.5 in overall case length, 5.0 m total length and no agency approval requirement.

The 5.0 m probe is designed for use with a 5.0 m Proximitor sensor. The official ETR system data specifies a 2 mm linear range and a recommended installation gap of approximately 1.27 mm.

Technical Data

Complete model	330192-00-25-50-00
Brand	Bently Nevada
Product family	3300 XL 8 mm Proximity Transducer System
Product type	Extended temperature range armored proximity probe
Probe thread	3/8-24 UNF
Unthreaded length	0.0 in
Overall case length	2.5 in
Total length	5.0 m (16.4 ft)
Cable construction	75 ohm triaxial PFA-insulated ETR cable with flexible AISI 302 or 304 stainless-steel armor and FEP outer jacket
Linear range	2 mm (80 mils), approximately 0.25 to 2.3 mm
Recommended gap	Approximately 1.27 mm (50 mils), -9 Vdc
Scale factor	7.87 V/mm (200 mV/mil), plus or minus 6.5 percent for the ETR 5 m system at 0 to +45 degrees C
Frequency response	0 to 10 kHz, +0/-3 dB
Operating temperature	Probe and extension cable -35 to +260 degrees C; Proximitor sensor 0 to +45 degrees C under published ETR performance conditions
Minimum cable bend radius	25.4 mm (1.0 in)
Dimensions	0.0 in unthreaded length; 2.5 in overall case length; 5.0 m total probe length
Weight	The official datasheet does not state one exact assembled weight for this complete 5.0 m armored probe; probe and armored-cable weight values are listed separately
Agency approval option	00 - Not required
Official source	Baker Hughes Bently Nevada datasheet 141194 Rev. AL, pages 5-8 and 15-16

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

Extended temperature range

The probe and extension cable are designed for published ETR operation from -35 to +260 degrees C.

Armored lead

Flexible stainless-steel armor with an FEP outer jacket protects the integral triaxial cable.

Displacement measurement

The matched 5 m ETR system provides a published 2 mm linear range for shaft vibration and position measurements.

Matched system length

The 5.0 m probe configuration is designed for a 5.0 m Proximitor sensor and must be selected as a matched system.

Connections

Signal cable	75 ohm triaxial PFA-insulated ETR cable
Cable protection	Flexible AISI 302 or 304 stainless-steel armor with FEP outer jacket
System matching	5.0 m probe designed for use with a 5.0 m Proximitor sensor
Target size	Minimum flat target diameter 15.2 mm; minimum shaft diameter 50.8 mm, with 76.2 mm recommended
Thread mounting	3/8-24 UNF probe thread with maximum thread engagement of 14.3 mm

Installation

01 - Verify the complete code

Match 330192-00-25-50-00 on the quotation, nameplate, packaging and official ordering information.

02 - Match the sensor system

Use this 5.0 m probe only with the matching 5.0 m Proximitor sensor specified for the ETR system.

03 - Prepare the mounting

Provide a 3/8-24 UNF mounting thread and keep thread engagement within the published 14.3 mm maximum.

04 - Set the probe gap

Establish approximately 1.27 mm mechanical gap, corresponding to about -9 Vdc in the published system data.

05 - Route the cable

Maintain at least 25.4 mm cable bend radius and protect the armored lead from crushing, abrasion and excessive tensile load.

Environment

Temperature

Probe and extension cable -35 to +260 degrees C for the published ETR performance conditions.

Probe materials

PPS probe tip with AISI 303 or 304 stainless-steel probe case.

Armor

Flexible AISI 302 or 304 stainless-steel armor with FEP outer jacket.

Maximum tensile strength

330 N between probe case and probe lead.

Agency approval

The 00 ordering option specifies that agency approval is not required.

Compatibility

Use as a matched 5.0 m ETR transducer system and verify the target material, shaft geometry and sensor electronics before commissioning.

FAQ

Q1. How can the exact quoted 330192-00-25-50-00 be verified?

Match the complete 330192-00-25-50-00 code on the quotation, product label and packaging. Confirm 0.0 in unthreaded length, 2.5 in case length, 5.0 m total length, 3/8-24 UNF thread, armor and the 00 approval option.

Q2. How can New, Used or Refurbished condition be distinguished?

Request current date-marked photos of the complete label, probe tip, threaded case, armored lead, connector end and packaging. Look for tip wear, bent armor, damaged cable, thread marks, repaired joints or replaced labels.

Q3. How should supplier legality and reliability be checked?

Verify the supplier legal entity, registered address, payment beneficiary and traceable contact. The written offer should state Bently Nevada, the complete 330192-00-25-50-00 code, condition, quantity and return terms.

Q4. Which specifications must engineering confirm before purchase?

Confirm the 3/8-24 UNF thread, 0.0 in unthreaded length, 2.5 in case length, 5.0 m system length, armored ETR cable, 2 mm linear range, 1.27 mm recommended gap and matched 5.0 m Proximitor sensor.

Q5. What physical evidence should be requested before payment?

Ask for one date-marked photo set showing the full label, complete ordering code, probe tip, thread, armor, full cable and connector end, together with packaging and a length reference. For an unsealed unit, request documented system checks using the correct matched sensor.

Q6. Can another 3300 XL probe suffix replace 330192-00-25-50-00?

Not automatically. Suffix positions change unthreaded length, case length, total system length and approval status. A different probe length can also require different matched sensor electronics, so use the complete 330192-00-25-50-00 configuration unless engineering approves the exact alternative.

Recommend Models

JUE-87 NQE-3222,NTF-318	DC60S3-B	PAK1 7/16
CR2790E100A2	GE IS420UCSCH2A-G-V0.1-A	MLDH1050P
GA4000	6SL3352-1AE37-5BA1	B6-30-10
LP-8217	ABB REC670 1MRK004814	N6705C
102E	HA-16	MH12BDA74ALPA
ABB VSC12	2002-1611/1000-541	A1SD51S
MV-PD-03-0001-01	BT510	713360
VMPA2-FB-EMG-4	7000-17121-2940500	3RH21221BB40
6TA6682	FGHM3321EP	FS-N12N
PM3B5080AB6A0Z	KL9100	WD1001FALS-41Y6A11TB
CKRD2420P	SC050R-001-023	6ES5498-1AA51
CX-QN8K8	E43B015	RF1V-3A1B-D24
DSMD 1EA	2010105S805	7XS5403-0AA00
10E3T3N-2/50	603-478	VIB5.600
77151 LR200-77151	A243 #21	NFCP502-W05
1492-H	10-10-05-00	2700C12CBAEZWZ
APW-3 RG33	PN:9905-866	TR12NE-0.8
RK1B2	Q7800A 1005	032F1204
WO-5718L-01SD-RO	MK2PN-S	LRB526032
PMKG-JLP 347485-000	H2007B-3	0294402244CC