ALL PRODUCTS

Bently Nevada 330101-00-32-10-02-00 3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, without armor

Bently Nevada 330101-00-32-10-02-00 3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, without armor

Bently Nevada 3300 XL 8 mm Proximity Probe

Model

330101-00-32-10-02-00

Description

3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, without armor

Key specification

0.0 in unthreaded length; 3.2 in case; 1.0 m standard cable; no approvals

Selection note

Confirm the 3.2 in case geometry and matched electrical system length before quotation.

Email Inquiry WhatsApp

Overview
Function
Specs
I/O
Safety
Install
Verify
Stock
FAQ
Recommended Products

Product Overview

3300 XL 8 MM PROXIMITY TRANSDUCER SYSTEM

Longer-Case Standard-Mount 8 mm Probe

A non-armored 3300 XL 8 mm probe with a 3.2 in overall case, intended for non-contacting vibration and position measurement in a compatible complete system.

Brand	Bently Nevada
Series	3300 XL 8 mm Proximity Transducer System
Complete model	330101-00-32-10-02-00
Official description	3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, without armor
Configuration status	Confirm the 3.2 in case geometry and matched electrical system length before quotation.

Selection note: Confirm the 3.2 in case geometry and matched electrical system length before quotation.

Function

Application-focused information for this exact ordering configuration.

Measures static position and dynamic vibration within a complete 3300 XL 8 mm transducer system.
Supports fluid-film bearing machine vibration and position applications.
The 3.2 in case option supports installations requiring this specific threaded-case geometry.

Specs

Official ordering and system data. Values apply under the manufacturer conditions stated in the applicable datasheet.

Probe family	330101, 3/8-24 UNF thread, without armor
Unthreaded length option 00	0.0 in
Overall case length option 32	3.2 in
Total length option 10	1.0 m (3.3 ft)
Connector and cable option 02	Miniature coaxial ClickLoc connector, standard cable, without connector protector
Agency approval option 00	Not required
System linear range	2 mm (80 mils) under stated official reference conditions
Recommended radial-vibration gap	Approximately 1.27 mm (50 mils), -9 Vdc

I/O

Mechanical and electrical interface details used for selection and integration.

Thread	3/8-24 UNF
Armor	Without armor
Cable	Standard 75 ohm probe cable, 1.0 m total length
Connector	Miniature coaxial ClickLoc, no connector protector
Nominal 1 m probe DC resistance	7.59 plus or minus 0.50 ohm

Safety

Protection and environmental suitability must be confirmed for the complete installed system.

The complete ordering code uses agency approval option 00. Confirm temperature limits, environmental exposure, connector protection and installation-area requirements against the full transducer system and official installation drawings.

Install

Use the complete ordering code and system-length rules before installation.

Confirm the 3.2 in case length fits the available mounting depth.
Confirm the zero unthreaded-length option is correct for the probe holder.
Match the 1.0 m probe with the required extension cable and Proximitor Sensor total system length.
Verify the target material and initial gap before commissioning.

Verify

Verify the exact unit and compatible components before quotation.

Verification first: Do not treat a partial code, stock record or photograph as confirmation of the complete configuration.

Confirm complete model 330101-00-32-10-02-00.
Confirm no armor and 3/8-24 UNF thread.
Confirm 0.0 in unthreaded length and 3.2 in case length.
Confirm 1.0 m standard cable and ClickLoc connector without protector.
Confirm approval option 00 is acceptable.

Stock

Commercial terms remain conditional until the exact unit and requested documentation have been checked.

Commercial status: Stock, condition, testing, warranty and dispatch remain subject to verification.

Stock status	Confirm before quotation
Condition	New, used or refurbished status is subject to verification
Current photos	Current unit and nameplate photos are available on request, subject to availability
Warranty	Confirm before quotation
Testing	Test status and report availability are subject to verification
Dispatch time	Confirm before quotation
Payment methods	Available on request
Quotation response	Subject to verification after receipt of the complete requirement
Transaction verification	Company and transaction-process documents are available on request

FAQ

Send the complete requirement for configuration and commercial verification.

Is this exact model available?
Confirm before quotation.

Can compatibility be confirmed?
Compatibility is subject to verification against mounting depth, extension cable, Proximitor Sensor length, target material and monitor input.

Recommend Model

Popular compatible and related models for reference.

KJ1501X1-BC2	1756-DHRIO	6ES7288-3AR02-0AA0	ANR10D	AX522
6ES7505-0RB00-0AB0	6GK7242-5DX30-0XE0	6ES7288-1CR40-0AA1	KJ3002X1-BC1	DO840
6ES7288-3AQ04-0AA0	6ES7223-1PH32-0XB0	6ES7515-2AM02-0AB0	DX561	6ED1055-1HB00-0BA2
6ES7518-4AX00-1AC0	6ES7532-5HF00-0AB0	6ES7288-6EC01-0AA0	6ES7288-1CR40-0AA0	TB561-ETH
CC-TCF902	CI865K01	6ES7215-1BG40-0XB0	1756-EN2T	1769-L18ER-BB1B
CI522-MODTCP	6ES7515-2RN03-0AB0	ADV557	6ES7288-2DT08-0AA0	1756-IF16
A2FV70D	DI525	6ED1055-4MH08-0BA0	6ES7288-7DP01-0AA0	1769-L16ER-BB1B
PM5132-T-ETH	6ES7292-1AG30-0XA0	6ES7511-1TK01-0AB0	6ES7505-0RA00-0AB0	PM864AK01
6ED1055-1MA00-0BA2	DO524	1769-L36ERM	6ES7231-5QD32-0XB0	AKB337
6ES7540-1AB00-0AA0	1756-CN2R	TU531	6ES7232-4HA30-0XB0	CC-TCNT04