ALL PRODUCTS

Bently Nevada 330101-08-24-10-02-00 3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, without armor

Bently Nevada 330101-08-24-10-02-00 3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, without armor

Bently Nevada 3300 XL 8 mm Proximity Probe

Model

330101-08-24-10-02-00

Description

3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, without armor

Key specification

0.8 in unthreaded length; 2.4 in case; 1.0 m standard cable; no approvals

Selection note

Confirm the compatible extension cable and Proximitor Sensor so the complete electrical system length is correct.

Email Inquiry WhatsApp

Brand:

Bently Nevada

Spu:

330101-08-24-10-02-00

Overview
Function
Specs
I/O
Safety
Install
Verify
Stock
FAQ
Recommended Products

Product Overview

3300 XL 8 MM PROXIMITY TRANSDUCER SYSTEM

Standard-Mount 8 mm Probe without Armor

A threaded, non-contacting proximity probe for vibration and position measurements when used with compatible 3300 XL extension cable and Proximitor Sensor components.

Brand	Bently Nevada
Series	3300 XL 8 mm Proximity Transducer System
Complete model	330101-08-24-10-02-00
Official description	3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, without armor
Configuration status	Confirm the compatible extension cable and Proximitor Sensor so the complete electrical system length is correct.

Selection note: Confirm the compatible extension cable and Proximitor Sensor so the complete electrical system length is correct.

Function

Application-focused information for this exact ordering configuration.

Measures static position and dynamic vibration as part of a complete 3300 XL 8 mm transducer system.
Supports fluid-film bearing machine vibration and position measurements.
Can support Keyphasor reference and speed measurements subject to application guidance.

Specs

Official ordering and system data. Values apply under the manufacturer conditions stated in the applicable datasheet.

Probe family	330101, 3/8-24 UNF thread, without armor
Unthreaded length option 08	0.8 in
Overall case length option 24	2.4 in
Total length option 10	1.0 m (3.3 ft)
Connector and cable option 02	Miniature coaxial ClickLoc connector, standard cable, without connector protector
Agency approval option 00	Not required
System linear range	2 mm (80 mils) under stated official reference conditions
Recommended radial-vibration gap	Approximately 1.27 mm (50 mils), -9 Vdc

I/O

Mechanical and electrical interface details used for selection and integration.

Thread	3/8-24 UNF
Armor	Without armor
Cable	Standard 75 ohm probe cable, 1.0 m total length
Connector	Miniature coaxial ClickLoc, no connector protector
Nominal 1 m probe DC resistance	7.59 plus or minus 0.50 ohm

Safety

Protection and environmental suitability must be confirmed for the complete installed system.

The complete ordering code uses agency approval option 00, meaning approvals are not required for this configuration. Installation-area classification, connector protection, temperature limits and environmental exposure must be checked against the complete system documentation before use.

Install

Use the complete ordering code and system-length rules before installation.

Verify 0.8 in unthreaded length is at least 0.8 in less than the 2.4 in case length.
Match the 1.0 m probe with an extension cable and Proximitor Sensor of the required total system length.
Use the supplied locknut and observe the official mechanical installation guidance.
Confirm target material; published performance is based on Bently Nevada AISI 4140 steel.

Verify

Verify the exact unit and compatible components before quotation.

Verification first: Do not treat a partial code, stock record or photograph as confirmation of the complete configuration.

Confirm complete model 330101-08-24-10-02-00.
Confirm no armor and 3/8-24 UNF thread.
Confirm 0.8 in unthreaded length and 2.4 in overall case length.
Confirm 1.0 m standard cable and ClickLoc connector without protector.
Confirm approval option 00 is acceptable.

Stock

Commercial terms remain conditional until the exact unit and requested documentation have been checked.

Commercial status: Stock, condition, testing, warranty and dispatch remain subject to verification.

Stock status	Confirm before quotation
Condition	New, used or refurbished status is subject to verification
Current photos	Current unit and nameplate photos are available on request, subject to availability
Warranty	Confirm before quotation
Testing	Test status and report availability are subject to verification
Dispatch time	Confirm before quotation
Payment methods	Available on request
Quotation response	Subject to verification after receipt of the complete requirement
Transaction verification	Company and transaction-process documents are available on request

FAQ

Send the complete requirement for configuration and commercial verification.

Is this exact model available?
Confirm before quotation.

Can compatibility be confirmed?
Compatibility is subject to verification against the extension cable, Proximitor Sensor system length, target material, monitor and installation geometry.

Recommend Model

Popular compatible and related models for reference.

6ES7212-1AF40-0XB0	PM858K01	6EP3332-6SB00-0AY0	AAB842	TB521-ETH
6ES7288-5DQ01-0AA0	1756-L83ES	KJ3241X1-BA1	6ES7288-7DP01-0AA0	6ES7223-1BL32-0XB0
6ES7288-1CR60-0AA1	6ES7215-1AF40-0XB0	1756-L83E	6ES7288-3AM03-0AA0	PM5072-T-ETH
DP820	AAI141	6ES7290-6AA30-0XA0	CC-PCNT03	CI501-PNIO
6ES7288-6EC01-0AA0	DI820	PM860K01	AFV30S	A2FV50D
TB561-ETH	6ED1052-1MD08-0BA1	6ES7211-1AE40-0XB0	6ES7288-2DR16-0AA0	AAV142
1756-L81ES	6ES7288-5AE01-0AA0	5069-L350ERM	AI835A	AAV144
6ES7217-1AG40-0XB0	6ES7288-1CR30-0AA0	AAI143	6ES7211-1BE40-0XB0	CC-PCNT02
1756-L902TS	ATA4S	6ES7517-3HP00-0AB0	TU843	1756-EN2TR
6ES7221-1BH32-0XB0	CI855K01	6ES7231-5PD32-0XB0	6ES7288-1SR20-0AA1	AAV141